Terrain description:
This is a desert island, it has no roads but tracks are marked with washed-up logs. There is a few very small settlements dotted around the island.
You start on a peninsula in the midde of the bay and drive across the sunken bridges to get to the island.
You'll need a decent offroad car as there's a section where the track dips underwater, and quite a few large mounds in the roads (where I didn't quite do the heightmap right lol)
Credits:
LJFHutch: Every single non-default object in the terrain (most of the objects I have taken from his Greece map).
PsychoDog: The actual terrain.
F1 Terrain Creator: V1.2 uses trees from the F1 Test Track.
Enjoy.
V1.2
Some fixes and improvements to the island. For the full list of all the edits read the readme. The main edits I've made is to the sunken bridges on the penninsula (I've got rid of the log section since that caused some problems when you drove over it) and added a couple more tracks and buildings. Also added some crops to the farmers field so it's not just green ground any more.
Never released Versions 1.1 - 1.19 because I didn't think there was a big enough change to justify a reupload, so this is the first update. Please tell me if I've screwed anything up that was correct in V1 and I'll fix it.
This works best with 0.38.67. If you use 0.39 there may be some extra bugs (e.g. I had a lot of collision problems when I tested with anything newer than 0.38.67) and things may not look quite right. No fixes are planned for obvious reasons (0.4 is going to be the next release, not 0.39).
*PLEASE DELETE THE OLD ZIP (Zyk.zip) BEFORE YOU DOWNLOAD THIS ONE!*
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
UPDATE 2:
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
UPDATE:
- fifth wheel version included. Keep in mind though, that most semi trailers might not fit it because of it's different position compared to normal semi tractors.
- the tires and rims are separate objects now, hence the rims won't flex anymore.
- custom engine sound. Sampled from actual Zil-135 sounds.
- some more skins.
i guess i can say merry x-mas now...
highlights:
- normal mapping
- detailed exterior, flexbody, damage textures
- 8x8 drive with a unique wheel and steering layout
- good off-road capability, and no irrealistic performance
known problems:
- alternate skin selection does not show up the first time you select it, only second time. Must be a RoR caching issue.
- when alternate skin is selected, material flare bindings (lights) do not work. This is confirmed to be a problem with the *.skin system.
So alot has been updated in this pack, the skin is totally new, the tires are new, the lights are sharper and brighter. A re-bored engine giving 3000 revs more capable of pulling very heavy loads, especially with a new 18 gear transmission. it features abs, tcs, slope brake all custom tuned to fit the trucks.
Box5diesel very kindly has had the trucks to test and they are of his liking. here is a quote.
Yea I think you could post that up, you did some good work on it. I wish all vehicles used slopebrake by default, I love parking on hills and not worrying about it rolling away slowly.
Post it in the mods&skins section of the showroom.
Thank you box5diesel for testing it and glad you like it.
was a problem with previous versions, but now is all fixed
Scania R560 6x2 "Tuning" semi and rigid tractors. Modded from 4x2 Scania R480 semi, originally made by Lenni.
Features:
Lift axle
Tilt cab
"Enough" power, chrome and lights
Credits:
Lenni: 4x2 base version and new UID (big thanks !!)
Korppi (Kuru): Editing the N/B and physics, frame mesh, basic bullbar mesh, airhorns, brights, sunvisor, front rims, lightsign, material flares etc...
Nexmartin: Roofbar, bumperbar and bumperguards, editing the basic bullbar, tons of great ideas
Lokinor566: Flares placing
Denkan: Many great ideas, beta testing
The skin is mainly made by Korppi, small fixes by Denkan and Nexmartin
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
Some slight bugs still exist like the front axle bending when turning.
Pretty good offroad capabilities.
Press "O" when you enter to lock the back door & press it again when the bed is at about 10 degrees
Their is no submesh on the bed yet
Credits:
Kuru for the N/B, Engine, Tool boxes & Fuel tanks
Lenni for the wheels
HRVI for making them
Any questions or what ever PM me or ask on here: Scania-142-Heavy-Hauler-Tipper-(Beta-First-Final-public-release)
Do not release mods without asking me via PM first!
Hello, I'm here to show a skin that created the MB Atego COMAX, with permission of the coco, the company's Brazilian postal service called Correios or Sedex.
Show some pictures and hope you like it.
Credits to Coco and Pedro, creators of the vehicle. [read more]
well here is my first upload the the repository its a skin for the Mercedes-Benz Atego with CoMax-Body&Lift V2 the skin is for my company called rormart. you dont have to sign up to get the skin if you do wish to purchase or sign up here is the link: rormart
to install just put the DDS file in your MB-Atego-CoMax.zipMB-Atego-CoMax.zip and your done [read more]
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
ZykriinasiIslandV1.2.zip
view details
Gold
Silver
Bronze
