This is a complete overhaul of the older arrow board trailer I made all those years ago. It's been completely rebuilt from scratch. It consists of a basic frame, and a basic mesh, so it should be pretty easy on your computer.
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder.
This is my Car dolly. It is straight submesh and very easy on FPS. This is more of a proof of concept as apposed to a full on new modification. You can use almost any vehicle to tow any other vehicle. Since it is submeshed you can scale it to be used on any vehicle rather easily. As of right now this is considered to be in beta. On a side note it is currently impossible to tow any vehicle with contacters. You will have to comment them out or watch them be destroyed by the wheel clamp.
Also feel free to modify and redistribute. Credit is not necessary but it is appreciated.
My latest creation. We own this trailer, so I figured it would be pretty cool to see how well I could replicate it.
DODGE charger (me) - Well... Everything
Most of the RoR Skype Group - Beta testing
Realistic weight and dimensions (I have a sheet of 8.5x11" paper FULL of measurements)
Highly detailed textures (Both refurbished and rusted version)
Working jack (Ctrl+F1/F2 to use it)
Detailed flexbody suspension
Ties! Ties! Ties! (And they won't ruin the load)
Notes: This trailer is not some arcadey play-thing, it does have limits. I suggest you don't load anything more than 7 tonnes on it, or else you might damage the hitch and suspension. The dimensions are also realistic, so not everything will fit on it, especially larger vehicles. A lot of vehicles in RoR, mostly older ones, are much too large compared to their real life counterparts, so those are almost guaranteed not to fit, unless they were small to begin with.
here is my second upload on the repo:
A 300 ton Heavy Haul LowBoy trailer.
I made the 3d-model some time ago, now I put it into RoR with some overwork.
You can change the color by editing the "300tlb_color.jpg" and the color of the wheels by editing the "300tlb_wheelcolor.jpg".
It has only five invisible wheels, this means it works very smooth even on lower systems (and that is actually the reason why I "cheated" ;-) ).
Use F3/F4 for the (invisible) trailer legs under the first part.
With F1/F2 you can rotate the steering dolly to the left and right. As far as I know this is done via hydraulic in real life. In fact it is just like a semi, but not propulsed.
It is loaded with a big tube.
Have fun driving it (and don't forget to look after the steering dolly ;-) ).
The Coot can get you anywhere you need to go, whether it be working on the farm or bashing up the trails. With its articulating hull it ensures maximum traction at almost any angle.
Fully animated props (steering wheel, gearshift, tachometer, ignition key)
Flexbody tires (they even work in mulitplayer)
Many upgrade options, so you can make it your own (including almost all upgrades that came with the original Coot)
Working winch on multiple versions
Off-Roader - base mesh, Exo-Cage, mini images and texturing
DODGE charger (me) - N/B, add-on meshes, add-on texturing, diesel sounds, prop placing, etc.
Jaw-4 - stock version rims
PrT Audiman - gas engine sounds
Do it! This thing is meant to be modded. Oxender-Performance will look at your part requests. We also have some PDNs for you to make skins in the thread.
This is a mobile home or mobile office depends on how you use it. You can pull it to your location and pull the tires into the body and it will be on the ground like a house. It is a decent amount of weight 22046.23lbs. It is fun to pull around comments are greatly welcomed. This is a 10x40 trailer its not a CAMPER.
made by me
Update 1. made the tongue longer fixed the tires problems added more weight
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- cartransporter (+trailer)
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
ACME ribbed trailer. Used for hauling common items, such as anvils, artificial rocks, earthquake pills, Indestructo Steel Balls, jet propelled pogo sticks, and rocket sleds. This one is twice as heavy as the original one, because it is full.
A standard 45 foot box trailer, as seen behind semis all over the United States. Weathered; decently easy to reskin. New version includes contactable submesh by tommylommykins, and fixed rims. (well, they work in North Saint Helens now, but they stopped working in Flatmap. :| )
This is jerald9000's 53-foot Great Dane trailer, reskinned into the livery of my new trucking company, Dreamland Trucking. The blank area in the center of the sides of the trailers can be skinned to your liking. It should not overwrite the original trailer.