|
|
|
Browsing tag Trailers, found 189 matching files. (8 pages)
|
|
|
This is my Car dolly. It is straight submesh and very easy on FPS. This is more of a proof of concept as apposed to a full on new modification. You can use almost any vehicle to tow any other vehicle. Since it is submeshed you can scale it to be used on any vehicle rather easily. As of right now this is considered to be in beta. On a side note it is currently impossible to tow any vehicle with contacters. You will have to comment them out or watch them be destroyed by the wheel clamp.
Also feel free to modify and redistribute. Credit is not necessary but it is appreciated.
http://www.rigsofrods.com/threads/85...969#post943969
Commands
F1-F2= Landing gear
F3-F4= Main ramp
F5-F6= Locking mechanism |
| |
|
|
 3 Comments, add comments here.
|
|
|
My fixed Horse Trailer.
The commands are
F7 F8 Legs
F9 F10 Door
F11 F12 Ramp
You need my permission to modify and release.
also if you find any problems PM me on the forums.
Thanks
|
| |
| Average Rating: |   | Tags: | Trailers |
Downloads today: 0, all time: 2698 |
|
|
One Comment, add comments here.
|
|
|
This is a skin for the ekeri trailer mad by Kuru.
credits go to
Kuru for the original trailer
Me for making the skin.
Installation:
extract to a temporary location and add the .dds file to the ekeri trailer .zip file
then play. |
| |
|
|
|
One Comment, add comments here.
|
|
|
I made a small trailer for anyone who want something for the smaller cars.
Remember to add "forwardcommands" to the car/truck you want to use it with if its not there.
The trailer is not complete, so far its v0.8.
Need textures (If anyone can texture it, that would be great).
And it need some few fixes.
All feedback (good, bad, ideas, fixes, etc.) are welcome.
F1-F4 to move the legs and the hook point. |
| |
| Average Rating: | | Tags: | Trailers |
Downloads today: 0, all time: 10882 |
|
|
One Comment, add comments here.
|
|
|
Modified dolly trailer with rear hitch.
To couple trailers together:
1) Have the trailers spawn in front of each other (you cannot steer them, and good luck backing it with the tractor)
2) The trailers control the rear hitch ONLY, so you should not have to adjust the rearmost trailer. Get in the trailers as you would a truck and move the trailer forward/backward accordingly. Hit "L" to attach the dolly to the rear hitch.
3) Use a vehicle with a tow hitch to move them at once. I have pulled up to 4 trailers at a time (5th trailer hitch broke)
Discuss here
*** If the game crashes or your camera is messed up refer to this post !
|
| |
| Tags: | Trailers |
Downloads today: 0, all time: 14012 |
|
|
No Comments yet. Add some here.
|
|
|
Updated version
Old version crashes due to submesh problems, no mesh on this one and most beams are invisible, kingpin clearly visible, in this version |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 1859 |
|
|
No Comments yet. Add some here.
|
|
|
This is a modded mb_trailer. Orginal trailer is made by questnl. I put a ramp door on the back, in regards to request I had seen, plus reduced numbers of axles to 2. You will need the actros-black in order to get the material file. |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 2416 |
|
|
No Comments yet. Add some here.
|
|
|
This a mod to camper ion the am2500 pack
Just place in your data/trucks Folder
IMPORTENT: must have the original pack that contains the camper.
Just pull the camper forward, and then select the trailer you want to pull behind it, back up to it then get in the camper and press ‘L’, and get in the truck and press F1 or what you need to get the legs up.
Credits: the original creator, dneufeld
The one who added the mod: Sushi
|
| |
| Tags: | Trailers |
Downloads today: 0, all time: 6088 |
|
|
No Comments yet. Add some here.
|
|
|
originally made by trevor i have shored his stepdeck and flatbed to make a nice heavy duty stepdeck and ramp capable of loading a d9 there is also a wide load one that can haul the tank
WARNING: you will need trevors original pack for this one to work and to unfold the oned half of the ramp you must pull the node backwards.
have fun)thanks to trevor for the original |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 6264 |
|
|
No Comments yet. Add some here.
|
|
|
Car trailer.. F1/F2 for the ramps/wheel guides F3/F4 for the legs.
Reuploaded, repo doesn't seem to like files with same name. |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 7350 |
|
|
No Comments yet. Add some here.
|
|
|
i did a job at a trucking company and one of there trailers had variable width, well i was thinking about it and decided to make a 20m long 3-6m wide trailer, as this is my first load file i still don't know how to make it roll on able so i couldent test it with a load so i don't know if it will carry one, all though even if it was just carried over the 12 wheels this would still be more use full than most, as i have not been able to test the load carrying capabilities i haven't added ties
f11-f12 for the feet.
f1-f2 to spread the trailer
ctrl+f3-ctrl+f4 to lower the ramp |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 5757 |
|
|
No Comments yet. Add some here.
|
|
|
This is an addition to the stepdeck and flatbed trailes I build earlier, and you must have those installed for this to work.
It is an extendible flatbed trailer with steering, that can be centered again for driving straight.
F1/F2 for the front legs
F3/F4 for the rear legs
F5/F6 to make the trailer shorter of longer
F7 to steer the trailer one way
F8 to center the steering
F9 to steer the other way.
Instead of using the same commands to steer left or right, it uses 2 sets of commands programmed on 3 keys (instead of 4)
Discuss in the stepdeck/flatbed thread: http://forum.rigsofrods.com/index.ph...25807#msg25807
(It is supposed to have the same ID as the other trailers, but the name got cut off when uploading)
Youtube link doesnt work becuase it has an underscare in the name: UrGK7nvw_zI |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 4432 |
|
|
No Comments yet. Add some here.
|
|
|
Hello. This Is my flatbed. Nothing really special. Just a grey trailer with submesh, ramps, and ties. Thanks to Squatch for submeshing and maxmillion for betatesting.
Commands:
1/2: Lower/Raise Jacks
5/6: Raise/Lower Ramps
Instructions:
1: Get a semi of your choice and spawn the trailer
2: Raise Up the jacks and hook up to the trailer
3: Lower jacks and ramp
4: Get a car of your choice and drive on the trailer
5: Get in the truck, press O
6: Raise ramps and drive away |
| |
| Average Rating: | | Tags: | Trailers |
Downloads today: 2, all time: 12072 |
|
|
One Comment, add comments here.
|
|
|
A car trailer uploaded to the repository quite a while ago (pre-v0.31). Credit for original chassis + skin goes to Stealth.
I added flares to this trailer, primarily using it as a learning experience.
;Changes from original:
; * Added brake + turn signals/flares
; * Reduced braking force, to prevent trailer from bouncing
; * Added some .33 support/info to this .load file. (Authors, fileinfo, fileformatversion, etc) |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 3303 |
|
|
No Comments yet. Add some here.
|
|
|
this is an update to my trailer, delete the old wideloadtraler.trailer file and place this in your packs folder.
the beams aren't that thin i was testing globebeams
commands
f1-f2 to spread the trailer
f3-f4 to lower the ramps
f5-f6 to lift the front up on the trailer(it can get stuck on things, and with load it sometimes rubs on the floor)
f11-f12 for the feet
"o" to lock a load on the back the 2-3 rows(x beams have ties)
"l" to lock the trailer to the truck
this needs some work, i wanna add a lip to the inside of the runs because wheels slide off, i wanna re-work everything and make it so the spread works by Slide Rail to add more stability, you'll know what i mean. and i wanna do the same thing with the ramps they come out far enough for 4x4's but things like bus's wouldn't get up |
| |
| Average Rating: | | Tags: | Trailers |
Downloads today: 1, all time: 7344 |
|
|
One Comment, add comments here.
|
|
|
Frameless dump trailer. Made from a picture in the request section and some imagination.
F1/F2: raise/lower support legs
F3/F4: raise/lower bed and open/close rear hatch.
Put it on the map like any other load: edit the .terrn file
Feel free to modify.
Note: Small update to the .load file that can be found as attachement to the 1st post in the discussion thread.
Discuss here |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 4732 |
|
|
No Comments yet. Add some here.
|
|
|
This is a simple 5th wheel camper. This is pretty well sized and is my first trailer. I hope you enjoy and comment if you like or if it isn't working.
Authors: my self
Btw the beams by the hitch are invisible now. |
| |
|
|
|
7 Comments, add comments here.
|
(updated on 1/8/12)
|
This is a mobile home or mobile office depends on how you use it. You can pull it to your location and pull the tires into the body and it will be on the ground like a house. It is a decent amount of weight 22046.23lbs. It is fun to pull around comments are greatly welcomed. This is a 10x40 trailer its not a CAMPER.
made by me
Update 1. made the tongue longer fixed the tires problems added more weight |
| |
|
|
|
10 Comments, add comments here.
|
|
|
Just a little trailer for the Willys Jeep Smiley. It works good with other small vehicles too. Keeping the current theme with the jeep, it is very barebones. But it works good and will follow the Willys Jeep just about anywhere without causing much of a fuss.
**REQUIRES THE WILLY'S JEEP .ZIP FILE IN ORDER TO FUNCTION CORRECTLY** (Uses the same wheelfaces).
Discuss Here |
| |
| Tags: | Trailers |
Downloads today: 0, all time: 3086 |
|
|
No Comments yet. Add some here.
|
|
cardolly.zip
view details
Gold
Silver
Bronze
