UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
A Scania ampliroll, based on the default Scania loader by Pricorde. I made this a while back (now added UID and a miniature file).
Works nicely in the latest version(0.38.43). NOT tested with older versions.
Credits:
Pricorde - the default 6x6 Scania Loader
Scania & Pricorde - the skin
Me(Aivar) - ampliroll mod
So this is the new version of the "highliner" double deck EMU, commonly found on the Metra Electric lines in Chicago. This is a 2 car arrangement only. 4, 6 and 8 car versions are in development however, there seems to some issues with nodes2 and slidenodes.
Features:
-Working Doors F5/6/7/8
-Working Pantographs F9/10
-Custom Sounds
-Unfinished Cab Interior
-Flares
-Realistic(ish) acceleration and top speed
Installation & Safe Usage:
-Place the file "highliner.zip" in the packs folder.
-Don't drive round very sharp corners over 30mph.
-Don't try and switch tracks over 50mph.
-Don't try and couple this to any other train. I know it's tempting but it's an EMU you idiots.
-Support/Comments: Forum Thread
-To spawn on train valley add this line to the .terrn:
This is a new version of the Atego-DLK uploaded by Firepics. I made it look like Belgian ladder trucks. I also made a new suit for the fireman. Hope you enjoy! Don't hesitate to comment
Hier is een Belgische versie van Firepics z'n Atego-DLK. Ik heb ook het pak van de brandweerman veranderd. Ik hoop dat je het leuk vindt! Aarzel niet om commentaar daarop te leveren
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Spawning:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
Controls:
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
(Un)Coupling:
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
Thanks to:
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Update:
Added ropables so it can now be lifted with a crane.
Errors:
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
sputnik_1 for helping me with adjusting the node/beam.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
This is a chevron skin for the international 4700 & tanker trailer by trevor. simply replace the original files with the files in the pack and there you go. enjoy!
This is a mod to the BI3300 by BusMan1985. All that I've changed is the sounds. The engine has 2006 DT466 sounds and the others are from an International 4300 and an IC CE200
This is a 2005 International 3300. It has a 6.0L VT365 turbo diesel V8 engine and an Allison 2100 PTS transmission. It's built off the International 4200 chassis and is nearly identical to the International 3300
This is it after a few months: the Seridon Si14 from Seridon Motorhomes
This is my first creation from scratch, and it's a bit oversized. The next versions will be better scaled
In the next update it is colorable
Credits:
Me: n/b and mesh
haselnut116601: support, door n/b and loads of other stuff
rainingheavy: steeringwheel and placement
Scalefreak93: shocks
Nickster 7: wheels
bray: engine settings
I don't remember all the people who helped me, so report it to me if I forgot someone!
New
Added some copyright file to the zip, since someone found it necessary to use my mesh without permission for another game.....
This is the Liebherr LTC 1045-3.1. It's a small compact crane which can lift 45t at close range.
The crane is fully skinable and you can download the PDN files here You are allowed to release new skins onto the repo but please make it a .skinzip!
Be sure you got an up to date RoR version
Credits:
- Lenni for mapping the whole crane and his tons of work on finishing this project!(Mirrors, flares and N/B fixes!)
- AIN_002 for editing meshes and bug fixes on the N/B
Controlls:
You can also find the controls by the T-screen. (just press T in-game)
Pack now includes 2 P-boom versions.
----------------------------------------------------------------------------------------------------------------
This is the FLK-1500, a strong crawler crane and designed by AIN_002. The crane is not mapped but you can still skin some parts and change colors of meshes. I recommend downloading the skin pack from Rotexx. Uploading your own skin is allowed but please upload it as a skinzip.
Controls:
F1/2 - Rotating the crane
F9/10/11/12 - Moving the tracks
You can view the rest of the commands in the T-screen
This pack includes 6 cranes
- FLK-1500 with 108m boom
- FLK-1500 with 108m P-boom
- FLK-1500 with 58m boom
- FLK-1500-NT with 108m boom
- FLK-1500-NT with 108m P-boom
- FLK-1500-NT with 58m boom
There might be coming more version of this crane like something with a jib but that will be a matter of time.
This zip also includes counterweight for the crane, which can simply be locked to the back of counterweight-arm with L!
Oh and before more people start crying about this: The counterweight can't be lifted off the ground when there is no heavy load in the hook! (which is logical and real!).
Credits: AIN_002 - Started the project/modelled the crane. Rotexx - Did get the sounds for me. Craneman - Finished the whole project. Sputnik_1 - Tuning and helping with the CW trailer
This Pack have a lot of Skinzips for the Heavy Crawler Crane. The Skinzips are for the normal Crane Version - and the Skinzips with "NT" is for the Narrow Track Version.
This is my Spierings crawler crane with 60m jib. It is able to lift 2t at the end of the jib! It is possible to give the jib an angle, And the elevator on the side of the tower can move up and down. It is also possible to edit the side panels for skinning and the main color can be changed.
Notice: First shift to the Reverse gear and then back to Neutral!
Controls:
F1/ F2: Rotate superstructure
F3/F4: Move trolley
F5/F6: Hook up/down
F7/F8: Jib angle F9/F10: Move left track F11/F12: Move right track
Ctrl+F1/F2: Elevator up/down
Don't complain in the thread about that it doesn't move or something because then you didn't read the description!
Credits:
Lenni: Helped me a lot with the n/b tracks! (thank you for that)
Bcazbobby: Helped me with fixing some bugs.
This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
This vehicle features the "Driving right out of the package" concept.
So put it straight into your data/packs folder and you'll be fine.
Please note that it is my first vehicle and I''m still learning
Included in the pack is:
- Manitou telehandler with coupling for attachment
- Manitou telehandler with truss boom
- Manitou telehandler with winch
- Bucket attachment
- Forklift attachment
- Counterweight loads
Version 1.2
- Skin selection menu removed (download skin pack instead - see forum link)
- New torque curve
- Flares added
- Working lights/beacon added (Ctrl-1)
- New Manitou winch version
- 2 Counterweight loads
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
Features:
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
v1.2
Fixed:
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Meshwheel2
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
****Please note, this is the updated version. I had posted an earlier version with errors. I was not aware that they would both be posted to the repo. This one is better!
Authors: Bonehead, DT466BusMan, Dodge0359, nelson480, Box5diesel, khadner ,rorlover11, thatsnice ,IC CE300 (If you have worked on any part of the many versions of this bus over the years and have been left out, please let me know and i will add you)
Here is the school bus pack some of you have asked me about. I've changed it up a bit for some variety. Most are Blue Bird bodies but there is a Carpenter and a Thomas as well. They drive pretty realistically.Here is the lineup:
*1986 Blue Bird International S-1800 with an International Navistar 9.0L V8 Diesel and an Allison MT-643 transmission
*1990 Blue Bird International 3800 with an International Navistar DT360 Turbocharged 5.9L Inline six cylinder Diesel and an Allison AT-545 transmission
*1988 Blue Bird International S-1700 with an International Navistar 7.3L V8 Diesel and an Allison AT-545 transmission
*1996 Blue Bird GMC CV200 with a 366ci GM gasoline V8 engine and an Allison AT-545 transmission
*1985 Carpenter Chevrolet C/60 with an 8.2L Detroit Diesel Turbocharged V8 engine and an Allison AT-545 transmission
*1985 Blue Bird GMC 6000 with an 8.2L Detroit Diesel V8 engine and an Allison AT-545 transmission
*2007 Blue Bird International SBCV 3300 with an International Navistar DT466 7.6L Turbocharged Inline six cylinder Diesel and an Allison PTS 2500 transmission
*1979 Thomas International S-1700 with an International Harvester 345ci gasoline V8 engine and an Allison AT-545 transmission
This is a pretty large file and is very sound file intensive. There have been conflicts with the other school bus files with sounds not working properly or at all. These buses are not perfect and do not use any meshes that have not been seen already.
These buses do have seats and realistic parking brake sounds!
it is a Scania 470 woodchips truck. dont know the english name for it. but it is called "flisbil" in swedish. its not a serious work. just something i did when i was bored. feel free to add a good texture with windows and meshes
just a peterbuild. i have only done a submesh that is red. no mesh or emissive or something like that. i will see this one with a texture so work on now
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
This is my "Löschgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
///Deutsch////
Hier ist mein Löschgruppenfahrzeig 16/12 (LF 16/12)
Man kann die Türen der Kabine sowie des Aufbaus mit den Tasten F1-F10 öffnen.
Die Schlauchhaspel hinter dem Auto kann man anhängen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 ändern.
Credits: Das Fahrzeug habe ich bis auf den Feuerlöscher und die Textur der Reifen komplett selbst erstellt
Here is my Mercedes Benz SK B1 1224 THW.
It is based on the 16 TLF from FF_Neustadt where I changed the skin and truck file.
The original truck is from FF_Neustadt [read more]
This is a fire engine from the fire department Hamburg.
The Original was build from 1994/1995 by Mercedes Benz and Ziegler.
I used the tips from the older fire engines to work over the meshes so that there d´ont be any errors...i hope.
You can open the command list with the button "T" an hook on the hose reel with button "O"
The node/beam chassis and the meshes are build by me.
This is a Ladder Truck from the fire department Hamburg.
Build in 1995 from Mercedes Benz and Metz.
I has experimented with the slide node system and it works very well.
The command list can be opened by pressing button "T" and the ladder can be secured by pressing button "O".
The node/beam chassis and the meshes are made by me.
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-FIRE ENGINE (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-LADDER TRUCK (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-TANKER TRUCK (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-Fire Engine (MB NG 80)
-EQUIPMENT TRUCK (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second TANKER TRUCK with WATER CANNON (MB NG 80)
-Fire Engine (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
it should look like a Neoplan Transliner...
in the game it means : Neoplan Transliner
Credits:
Skive -> orginal bus
Me -> i have mod it
AndrewB-> flares
Update1: i remove the steering back axel... i think it was a good idea...Now the truck is nearer the orginal!!!
and the back wheelface
Update2: the exhaust is nearly the orginal...
And it have at the moment 10 gears....better i think ...
Update3:
i repair the skin, and it give 3 busses:
1. the normal, 2.with the back steering axel, 3.and one version with other mirrors
Update 4:
remove version with other mirrors,
AndrewB add flares
when you have Problems with the truck please say it and ideas are too!
it works too in 0.37.126 and in 0.38.22 +
i hope you like it !!!
And tanks for 1000 downloads !!!
sry for bad english!
enjoy
Some bugs still exist like the front axle bending when turning especially since it only has 1 front axle now.
Credits:
Kuru for the N/B, Engine, Tool boxes & Fuel tanks
Lenni for the wheels
HRVI for making them
Any questions or what ever PM me or ask on here: Scania-142-Heavy-Hauler-Tipper-(Beta-First-Final-public-release)
Do not release mods without asking me via PM first!
Kenworth trial truck based around a w900. The pack contains two options- regular and FPS. Features open, split and locked diff options. Low gearings for offroading and crawling. The regular version also has flexmesh tyres.
Thanks to Box5 for the original meshes and chassis.
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
Hi there, this a 1984 Kenworth SAR designed and built only in Australia. It has a big 'n' burly Cummins inline 6, backed by an Eaton Fuller transmission with 12 forward gears to get the power where it's needed.
If you have the old version make sure to delete it from your packs folder
NOTE: This is an extensively modified version of Box5diesel's W900. I give massive thanks to him for the original truck and for allowing me to modify it.
There are several different trucks in the pack, however, to save space they all share the same mesh so you can only spawn one of each type at a time, otherwise the materials will collide.
I included the photoshop file in the pack as well, so it easier to make custom skins.
If you find any problems feel free to send me a private message.
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Tatra813Pack.zip
view details
Gold
Silver
Bronze
