hola amigos de MÉXICO o de E.U.A les traigo este camión espero sea de su agrado y feliz año nuevo si se les ofrece algo contáctenme en mi correo próximamente su remolque adiós tienen todo mi permiso de modificar siempre y cuando se me de el credito =) goodbye
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels.
NOTE: You will need to enable advanced wheels in the configurator under the "CPU" tab to enable "Wheels2" in versions older than 0.38.33.
Please note the credits for the crane go josh (1239) who made the original.
This is my mod of my previous mod called (MTVR2). This is a purely off-roader truck, it has 10 wheels and go's just about anywhere. The original version of this truck came with older versions of ROR so anyone who has used ROR for a while should remember it.
whats new:
More fps friendly then last version
locking diff's
reworked all the suspension with "shocks2"
removed "wheels" section and added "wheels2"
added a steerable rear axle
added grip nodes to the tires
truck now floats
can now change the PSI in the tires
This truck is not a looker and isnt meant to be, its meant to be a usable vehicle, it go's anywhere in ROR you want and will in fact climb up vertical walls. This truck is almost indestructible even after being drivin off a cliff usually a collapsed wheel is all that happens. It has so much torque and traction that if you give it full throttle from a dead stop in 6th or 7th gear it will wheelie up and over backwards. You can still tow trailers with it just hook them up to the receiver and lock it down with L.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
The most recent version of the Volvo FL6 (13/9/2006)
Now comes with both left and right-hand drive versions, and plain or liveried texures.
Corrected (longer) wheelbase and better weight distribution giving better handling.
Dashboard now fits inside the cab properly, better mirror alignment.
Improved texturing on the cab so it doesnt look quite so flat, easier for people to reskin if they want (please do
Box trailer has an improved drawbar set up with restricted movement to make it behave better.
WARNING: Will overwrite the version that comes with RoR, so best to take a copy of the existing files in case you decide you like the old version better.
A Scania ampliroll, based on the default Scania loader by Pricorde. I made this a while back (now added UID and a miniature file).
Works nicely in the latest version(0.38.43). NOT tested with older versions.
Credits:
Pricorde - the default 6x6 Scania Loader
Scania & Pricorde - the skin
Me(Aivar) - ampliroll mod
Well heres something I made ages ago. I got bored and wanted to have some fun in ror. So I made a basic baggage train and 2 styles of trailers for it. You can hook up as many as you want and they are designed to be low fps although with like 6 you will get some lag.
Credits:
All made form scratch by me (Al T.)
Do not modify without my permission.
Install: Open Zip and place the 3 zips inside in your ror packs folder.
Please have some fun!
p.s -this was a side project and only took a week, not my usual quality and a bit crappy
Here is my Mercedes Benz SK B1 1224 THW.
It is based on the 16 TLF from FF_Neustadt where I changed the skin and truck file.
The original truck is from FF_Neustadt
Update 23.11.2012
I have changed something in the truck file and in the zip file.
On my computer now it works with ROR 0.4.04
I hope you will like my truck. If you found problems with it you can contact me with PM and than
I solved them.
This is a working concept of a walking beam suspension for RoR, It's a simple truck, the suspension isn't, but it works, and rather interesting to drive.
Feel free to use this truck as a basic for others, just give credit where it's due.
This is a new version of the Atego-DLK uploaded by Firepics. I made it look like Belgian ladder trucks. I also made a new suit for the fireman. Hope you enjoy! Don't hesitate to comment
Hier is een Belgische versie van Firepics z'n Atego-DLK. Ik heb ook het pak van de brandweerman veranderd. Ik hoop dat je het leuk vindt! Aarzel niet om commentaar daarop te leveren
So here is my first upload on the Repo, the International PayStar 5600.
The first version comes as a 8x4 Semi truck used to haul Oversized Load.
Controls are:
F11/F12: raise/lower booster axle
CTRL+F1/CTRL+F2: open/close left door
CTRL+F3/CTRL+F4: open/close right door
CTRL+F5/CTRL+F6: open/close hood
CTRL+F7/CTRL+F8: flip "Oversized Load" sign
Hope you enjoy!
Mercedes LP322 Moving Van
Here it is, the Mercedes LP322... It's almost the same as the Buessing Burgloewe as you might noticed, just with another front mask. But that's ok, as the bodies were build by the same manufacturer and they only used different chassis, like from Buessing and Mercedes.
Features:
- flexbody
- managed materials
- material flares
- fully interior
- working switch for light, fog light
- working sun shield
- openable doors
- submeshed loading room (with collision)
- openable windows with moving hand bars
- working wipers (experimental)
- working brake pedal
- moving shift stick (at least it moves into reverse gear)
- ramps to get load inside
- ties to secure load
- ropables for tow trucks
The Mercedes is abit more powerful than the Buessing and goes a bit faster.
Buessing Burgloewe UM Moving Van
Here it is, my Buessing Burgloewe truck.
Features:
- flexbody
- managed materials
- material flares
- fully interior
- working switch for light, fog light
- working sun shield
- openable doors
- submeshed loading room (with collision)
- openable windows with moving hand bars
- working wipers (experimental)
- working brake pedal
- moving shift stick (at least it moves into reverse gear)
- ramps to get load inside
- ties to secure load
- ropables for tow trucks
This truck is not very powerful and it's slow. If you don't like that, don't drive it... I wanted to make it as realistic as I could.
Melroe M-880 Prime Mover
This is a prime mover for real heavy loads build out of a former wheeled skid-steer dozer. Like the real thing it does not have any suspension but a lot of power ;-) .
My RoR model features some animated parts like the cooling fans and levers inside the cab as well as some custom sounds.
Mesh and N/B all by me, please do not upload any mods without my permission, thanks :-) .
Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Spawning:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
Controls:
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
(Un)Coupling:
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
Thanks to:
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Update:
Added ropables so it can now be lifted with a crane.
Errors:
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
sputnik_1 for helping me with adjusting the node/beam.
Box5Diesel's Duece and a half (more like a 5 ton, but who's counting, lol)
This thing is a jack of all trades, crawling, climbing, towing, offroad, transport, u name it. I've made it to the top of the rock course with it, which took some tries, but its doable for sure. It also likes to climb walls, lol. The video attached shows that pretty well. I hope yall get addicted to it like I have, and multiplayer starts to swarm with it, lol. Anyway, if u have any comments feel free to dicuss them in the heavy trucks showroom thread for this release.
The hitch is setup for gooseneck now, but its also got a bumper pull attached, all u need to do is change node 87 and 88 from "h" to "n" or vice versa in the truck file (I made a small section for each node to help make it easier to find in the file), you can choose either one to be "h" for which hitch u want to use at a given time.
The exhaust stack is not a mesh, so it does break if u roll on it heavy, but im hoping to learn mesh soon to have a nice axle, stack, and suspension mesh mod for this.
Here's the Kenworth Needle nose Semi truck i've been working on. It's now complete and ready for release. It has Dual exhaust, so when u get 0.34, the Dual exhaust will automatically appear.
I tried to make the truck as realistic as possible, in both looks and driving, so I hope everyone enjoys. Big thanks to DFO for the really nice wheelface's.
What I made here was a truck that resembles a realistic truck, hopefully in everyway. It drives like a big rig, with alittle body sway, but a nice low center of gravity.
This pack includes:
1)Kenworth T800
2)Kenworth T800 Extended Chassis
It has Dual exhausts setup and ready, so when ROR 0.34 is out, the dual exhaust on this will automatically show up. I tried to make as much as I could with nodes and beams and keep the meshes to a minimum, so hopefully you guys enjoy. It has working emmisive lights, along with some flares. Mirrors dont work, there just for looks. The in cab camera shakes alittle, but I couldn't fix that, i tried lots of different setups and it wouldnt stay steady.
DISCLAIMER!!
This is a semi, so if u drive it like one, and do burnouts and what not, it does great. But if u start catching air or jumping up curbs at higher speed.....yes it will break, and im sure a big semi would break if u start jumping it, or slamming up curbs its not suppose to, so keep that in mind. You dont have to baby it, but realize its not like the MTVR where it would jump 100 feet and drive away fine, its not meant for that.
Features:
-Real weight, real power, real scale. (so don't expect to tow the ror trailers that way a kabillion lbs.)
-Lockers (press W)
-Operational dump bed, & tailgate
-Contactable bed to load vehicles or objects with ties (press O to tie down load)
-Animated winches on all except cargo version, some even have a rear winch.
-Flexbody everything pretty much
-Specular Shader
-Detailed Animated Interior with shifter.
-custom deuce sounds, with added turbo
Known issues:
-Shader shows up black sometimes, restart ROR until it appears normal, or download boring material below and drop in deuce zip.
-5th wheel version breaks when hooking to some trailers
-No flexbody tires (would be way to cpu heavy, it already is)
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
My goal for these trucks was to have some more convoy type vehicles that could do pretty much anything. All have working hitches, lights, mirrors, etc. The dumpbed has a contactable surface but it doesnt seem to hold crates really at all for some reason.
All the trucks have ties in the back so if u back up close to a vehicle and press "O", u can tow it around. I commented out the ropables in the back so the ties wont grab them. Ropables in the front are behind the wheels so u can strap it to trailers or tow any of these trucks from there.
There really stable on higher speed offroad like nhelens, and if u crawl slower u can get in most places in tough offroad spots.
The cargo mesh(big canvas cover version) when rolled over, the cargo part will go in the ground, I didnt want to build a box out of beams and nodes to make it contact the ground because i wanted to keep fps as low as possible, so thats something to just live with. Other than that, enjoy.
So alot has been updated in this pack, the skin is totally new, the tires are new, the lights are sharper and brighter. A re-bored engine giving 3000 revs more capable of pulling very heavy loads, especially with a new 18 gear transmission. it features abs, tcs, slope brake all custom tuned to fit the trucks.
Box5diesel very kindly has had the trucks to test and they are of his liking. here is a quote. [read more]
This is a chevron skin for the international 4700 & tanker trailer by trevor. simply replace the original files with the files in the pack and there you go. enjoy!
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
Features:
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
v1.2
Fixed:
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Meshwheel2
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
Repaint of the daf paris Dakar truck.. i measured the top speed... it gets around 40-45 mph if you have a long enough straight (aspen runway is a good place to try it)
This is my first Truck in ROR, a Rosenbauer Simba 8x8!
The watercannon is stearable, it has got flashlights and a sirene. Currently there are not any other special features.
I will post the HRET version later.
A small update for my Simba.
It should fix the very instable watercannon and includes the "ROR International Airport" skin.
It requires the old Simba just look below
This is the finished version of the ERF EC14 Wrecker & Loader that i started many months ago.
It has new UID's so they are standalone to any other version's of these vehicle's.
I have added a winch to the boom now so it is easier to rescue cars. If you find any problems or have any suggestions please post them in the discussion (Link below).
As with the numberplates bieng English i have done them to be realistic & are from the Prefix era. With the 1st letter meaning the trucks age in this case. These ERF's are M reg' so are from 1 AUG 1994 to 31 JUL 1995. http://www.number-plates-car-registr...ion_years.html
I have created the engine to be realistic of a derestricted ERF with a top speed of around 90mph. The engine is more powerful just below its max RPM so when it starts to struggle accelerating just change up a gear & it will keep going.
FREIGHTLINER2011.zip
view details
Gold
Silver
Bronze
