This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Brand and type: Mercedes Benz Atego Sleepwagen ANWB
Ingame name: MB Atego ANWB
Tested in: 0.38.57
This is an Standalone file!
I got permission from Lenni to release this back in April 2011, so I thought this would make a nice addition to the repo.
The ANWB is a dutch company that does most of the towing work in Holland. They basicly control the Roadside assistance branch.
The word ANWB stands for Algemene Nederlandse Wieler Bond.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
added the following
5th wheel version with ball mesh courtesy of Diesel Smoke
light bar with working flares on all versions. CTRL-1 for flashing lights on light bar.
beacon on each version
light bar is from the repo thanks to dodge0359a
improved power,braking and hauling abilities.
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
Hi there, this a 1984 Kenworth SAR designed and built only in Australia. It has a big 'n' burly Cummins inline 6, backed by an Eaton Fuller transmission with 12 forward gears to get the power where it's needed.
If you have the old version make sure to delete it from your packs folder
NOTE: This is an extensively modified version of Box5diesel's W900. I give massive thanks to him for the original truck and for allowing me to modify it.
There are several different trucks in the pack, however, to save space they all share the same mesh so you can only spawn one of each type at a time, otherwise the materials will collide.
I included the photoshop file in the pack as well, so it easier to make custom skins.
If you find any problems feel free to send me a private message.
This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- ampliroll
- cartransporter (+trailer)
- dumper
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
- trail-truck
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
Scania R560 6x2 "Tuning" semi and rigid tractors. Modded from 4x2 Scania R480 semi, originally made by Lenni.
Features:
Lift axle
Tilt cab
"Enough" power, chrome and lights
Credits:
Lenni: 4x2 base version and new UID (big thanks !!)
Korppi (Kuru): Editing the N/B and physics, frame mesh, basic bullbar mesh, airhorns, brights, sunvisor, front rims, lightsign, material flares etc...
Nexmartin: Roofbar, bumperbar and bumperguards, editing the basic bullbar, tons of great ideas
Lokinor566: Flares placing
Denkan: Many great ideas, beta testing
The skin is mainly made by Korppi, small fixes by Denkan and Nexmartin
This is my mod to BigBoy and 95blackz27's Kenworth T800.
Things I added/remade:
I chopped the stacks.
Fixed to hydraulics in the back (red/green)
Made the truck shinier.
Change the color then changed it back.
Added a weight to the Tri-Axle Longframe Daycab (.truck file #1)
Added then got rid of a bull bar from the Kenworth SAR.
Added then got rid of custom mudflaps made by me.
Added color to the door handle.
Etc.
Authors: BigBoy (Original Truck); 95blackz27 (Added Traction Control, Shined Driveshaft) HemiBoy95 (Aolcao Wheels) CarBoy (Weight and N/B for Weight) Scania_Lover (This mod of it)
Here is a skin for the Kenworth T600 and a 2 axle tanker trailer. The skin is based off of fuel delivery trucks for HESS gas stations. I made the skin as close to the actual paint job as possible.
Credits:
Kenworth T600 - HemiBoy95 & Box5Diesel
Tanker Trailer - Trevor
Inspiration - My father
Skins - Venem (me)
After a LONG time working on and off I bring you this:
DAF XF105 8x4 Hauling Truck Original truck by Questnl
You may have seen previous iterations of this truck on this site before, but none as extensive as this.
Here is what I have done: -------------------------------
() Completely redid cab texture, from scratch
() New HD Wheel Texture
() Added Traction Control
() Increased power, & braking
() Added Anti-Lock-Brakes
() Added slope brake
() Using Wheels2, with user controlled tire pressure ingame
() Decreased Weight (more realistic now)
() Sharpened up steering
() Updated suspension
() Updated Help.png
() Updated preview picture
() Fixed translucent metal mesh
() Added Beacons
() Updated ability to raise/lower extra wheels
() Added user controlled lights (see ingame help on your dash)
() Added rear flares:
-Reverse lights
-Blinkers
-Brake lights
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Platerpants"me"- skins
-Marco- skulls on skins
These are two of my favorite trucks, 1975 Chevrolet Titan 90 and GMC Astro 95.
The Astro 95 and the Titan 90 both have a Detroit 8v-71 318.
updated again with Sounds, The Titan is now longer in the GN Empire Builder Scheme
She's painted like my Titan model. Big Sky Blue and White with Black and gold stripes.
Now Without Visor, And Detroit 318 Straight pipe Sound Added.
Credits
Model - dneufeld
Wheels - Hemiboy
Adding the wheels - DougFunnie
Skins and tuning - MADDRIX
Sounds - MADDRIX - NRS91
This is a 1976 Ford W-9000 cab-over-engine semi tractor. A fairly basic node-beam vehicle that will get the job done. All of the pieces for this were created by me (M-138) except the mirrors. Feel free to modify, just remember to give credit.
This pack has four custom Kenworth T600's. They started as a joke but I got carried away. There is probably a lot of bugs and stuff I haven't found but I just wanted to get them finished.
Most of the trucks are completely impractical. The wheel base is too long to have a tight turning circle. They sit so low you'll rip your bumper off the instant you hit a gutter. The lowriders with hydraulics have the worst ride imaginable and are stiff as a rock. The only purpose they really serve is to look cool.
Controls:
'L' to lock on a trailer
'N' for lights
'Ctrl+1' for headlights
'F4/F3' to raise and lower the hood
For trucks 2 and 3:
'F5/F6' for front hydros
'F7/F8' for rear hydros
Feel free to mod these or do your own bug-fixin' however you see fit.
A Dutch skin for the Mercedes Atego Metz aerial firetruck.
It's a skin based on the Mercedes Atego from the fire department of Middelburg, Zeeland in the Netherlands.
I have tried to make it as real as possible, but because this firetruck is an older Mercedes Atego version than the one in use by the firedept. I could not exactly reskin all parts correctly.
I hope you like it!!
Pedro (Atego Chassis)
firepics (Firetruck body etc.)
Lenni (Nodes/Beams)
Ruben (Dutch skin)
Install: Just overwrite the files in this .zip with the .zip of the Mercedes Atego aerial firetruck
Hello, I'm happy to introduce my first ever official mod to a trailer, It is a monster energy skin for the FEDEX 53ft Great Dane dryvan, Just throw it in packs, Because of the (1) at the end it will not overwrite, So enjoy, I hope it is a cool mod to you guys, It took about 3 hours to get it right... haha.
Scania R 420 and R 480 Topline trucks, two different skins included.
Updated, doesn't use sections anymore.
Installation as usual, put the file in mydocuments/RigsofRods/packs.
If you have the older version then please remove it (this doesn't automatically overwrite!)
Works only in 0.36 and above.
All mesh and node and beam parts of the model are made by me, credits to pedro for the steering wheel texture.
If you want to reskin it make sure it doesn't conflict with my original pack in any way and contact me on the forums before you release any derivates of that model.
Only use one version of the truck at a time, more might crash the game.
I am not responsible if you mess up your RoR by installing or using this truck in a wrong way.
This is the Mercedes Benz Actros 6x6 pack.
This package includes 3 versions:
- version with no upper part
- version for hauling
- version with a plateau with a carcrane
It is version 1.2 in english; version 2.0 already planned..
JensLynIV_streamliner.zip
view details
Gold
Silver
Bronze
