This is my first major project i have full permission from negative ice and voulk.
This is my International 4400 pumper
It's based off a few different versions iv seen on the internet
it is now separate from the main zip so you may want to delete the one in the zip as it may conflict
and everyone else who contributed to this project.
new pump mesh
Welcome to my Dieselpunk road train pack. Included are a locomotive (6 versions), 4 passenger consists, 3 freight consists, and a shunter. These can more or less be mixed and matched as you please. Enjoy!
The rear view camera can be zoomed in and out by pressing ctrl+1. Adjust the height of the trailer drawbars with F1 and F2. Set the transmission to full auto when in a locomotive (not necessary in the shunter). The trailers can be entered and have a Ringfeder coupling at the rear for daisy chaining (careful, the brakes on subsequent trailers will not work).
12x12x12 highway locomotive. 16-cylinder turbosupercharged diesel engine, diesel-electric transmission. Traction motors and steering on all axles.
Length 48 ft, weight 120,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
12x12x12x2 highway locomotive, with 1 booster. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 95 ft, weight 240,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
12x12x12x3 highway locomotive, with 2 boosters. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 142 ft, weight 360,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
Relax in airplane-style seats with generous legroom in coaches 1 and 2, enjoy the view from the rear observation lounge, or get some refreshments or a light meal in the bar.
3 cars. Length 212 ft, weight 160,000 lbs. Maximum service speed 125 MPH.
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, enjoy the view from the rear observation lounge, or have a drink or light meal in the bar.
5 cars. Length 336 ft, weight 240,000 lbs. Maximum service speed 125 MPH.
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, marvel at the view from the rear observation lounge, visit the bar for drinks and snacks, or enjoy a delicious 3-course meal in the dining car.
7 cars. Length 461 ft, weight 320,000 lbs. Maximum service speed 125 MPH.
The choice is yours between single or 2-abreast airplane-style seats in coaches 1 and 2, 1+1 and 2+2 table groups in coaches 3 and 4, or 3+3 compartments in coaches 5 and 6 - legroom is generous throughout. Watch the latest newsreels in the theatre, visit the library for a vast selection of national and international newspapers, magazines, and books, and arrange meetings or send telegrams on the move in the conference room. The rear lounge offers a spectacular view of the landscape through panoramic windows, and the adjacent bar offers all manner of drinks, snacks, or even light meals. For a truly gourmet experience, the world-class kitchen on wheels offers exquisite 3-course meals in the dining car.
10 cars. Length 648 ft, weight 440,000 lbs. Maximum service speed 125 MPH.
Freight Consist 1
Expedited freight. Reefers and mail vans.
9 cars. Length 400 ft, weight 400,000 lbs. Maximum service speed 75 MPH.
Freight Consist 2
Hazardous goods. Chemical and fuel tankers.
10 cars. Length 387 ft, weight 440,000 lbs. Maximum service speed 75 MPH.
Freight Consist 3
Bulk freight. Timber trailers and coal hoppers.
8 cars. Length 296 ft, weight 440,000 lbs. Maximum service speed 75 MPH.
Made for version 0.38.67. Other versions are generally untested and may or may not work.
The wheels may oscillate when stationary because they are optimised for low rolling resistance. Exercise caution when stopping or parking as they tend to creep.
The longer consists are extremely CPU-heavy. Expect very low frame rates if you connect multiple long trailer consists.
These vehicles are not designed to deform realistically in a crash.
Except for the front and rear, collision meshes are disabled for performance reasons. They can be reenabled by removing the 'comment' and 'end_comment' lines in the submesh section of the .truck or .trailer file.
With the exception of the sounds provided by BigBoy, all assets used are available for modding with no further permission needed. See the readme for specific file information and licensing details.
Hello users of the rigs of rods forum, today I proudly update the FLC. Most of you know what it is, a school bus. many of you might be saying "aw crap, another CE mod." but, this is not the case. This has custom sounds, custom preformance, the ACX mirrors, newly positioned crossing gate, new flares, and new warning lights. credits for original CE go to the following:
So, I'll give you a little background knowledge on this bus.
I always wanted to drive a bus that I, and only I have dreamed of. I figured that I could find something on the site that was cool and wasn't just another CE. so I decided to read up on how to mod Rigs, it was certantly easier than other simulators I've seen in regaurds to modding it. That is how I ended up in this position with this bus. Please note that it is not fully completed so with that said, It still has no interior and only sub-mesh.
Updated sounds. Hooray! Feaetures the ASP flAilus, Enginefan vervion, and W/O engine fan sounds for the norm.
The newer authors to this bus would include:
Me (tomytom99): sounds, preformance, skins, and moving the crossing gate down.
ROR-EMS: mirrors and mirror placement
Here is the thread for the FLC: [link]http://www.rigsofrods.com/threads/91010-ASP-FLcolumbus-Once-Again-Updated-6-26-12-going-onto-repo[link]
More updates are coming, so be alert! once it is done, the will be a naedox quality video. Note: I will sometimes find a problem that you guys have. Most of the time you will need to find the problem, and I will fix it.
The bus now has about 15 skins, including dealership skins, a blank skin, and a NJDOC skin.
will crash game in MP and also flatsville, in both sp and mp.
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
****Please note, this is the updated version. I had posted an earlier version with errors. I was not aware that they would both be posted to the repo. This one is better!
Authors: Bonehead, DT466BusMan, Dodge0359, nelson480, Box5diesel, khadner ,rorlover11, thatsnice ,IC CE300 (If you have worked on any part of the many versions of this bus over the years and have been left out, please let me know and i will add you)
Here is the school bus pack some of you have asked me about. I've changed it up a bit for some variety. Most are Blue Bird bodies but there is a Carpenter and a Thomas as well. They drive pretty realistically.Here is the lineup:
*1986 Blue Bird International S-1800 with an International Navistar 9.0L V8 Diesel and an Allison MT-643 transmission
*1990 Blue Bird International 3800 with an International Navistar DT360 Turbocharged 5.9L Inline six cylinder Diesel and an Allison AT-545 transmission
*1988 Blue Bird International S-1700 with an International Navistar 7.3L V8 Diesel and an Allison AT-545 transmission
*1996 Blue Bird GMC CV200 with a 366ci GM gasoline V8 engine and an Allison AT-545 transmission
*1985 Carpenter Chevrolet C/60 with an 8.2L Detroit Diesel Turbocharged V8 engine and an Allison AT-545 transmission
*1985 Blue Bird GMC 6000 with an 8.2L Detroit Diesel V8 engine and an Allison AT-545 transmission
*2007 Blue Bird International SBCV 3300 with an International Navistar DT466 7.6L Turbocharged Inline six cylinder Diesel and an Allison PTS 2500 transmission
*1979 Thomas International S-1700 with an International Harvester 345ci gasoline V8 engine and an Allison AT-545 transmission
This is a pretty large file and is very sound file intensive. There have been conflicts with the other school bus files with sounds not working properly or at all. These buses are not perfect and do not use any meshes that have not been seen already.
These buses do have seats and realistic parking brake sounds!
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
It´s a package of german fire trucks of a fictional Fire Department from the fictional town Marktheim.
So that are a
-Command Vehicle (VW T3)
-Personal Carrier (VW T3)
-Tanker Truck (MB 1113 LAF)
-second Tanker Truck with water cannon (MB NG 80)
-FIRE ENGINE (MB NG 80)
-Equipment Vehicle (MB NG 80)
-Ladder Truck (MB NG 74)
and a smaller Fire Engine from a village near Marktheim that called "Oberdorf" (MB O'607D)
Pack now includes 2 P-boom versions.
This is the FLK-1500, a strong crawler crane and designed by AIN_002. The crane is not mapped but you can still skin some parts and change colors of meshes. I recommend downloading the skin pack from Rotexx. Uploading your own skin is allowed but please upload it as a skinzip.
F1/2 - Rotating the crane
F9/10/11/12 - Moving the tracks
You can view the rest of the commands in the T-screen
This pack includes 6 cranes
- FLK-1500 with 108m boom
- FLK-1500 with 108m P-boom
- FLK-1500 with 58m boom
- FLK-1500-NT with 108m boom
- FLK-1500-NT with 108m P-boom
- FLK-1500-NT with 58m boom
There might be coming more version of this crane like something with a jib but that will be a matter of time.
This zip also includes counterweight for the crane, which can simply be locked to the back of counterweight-arm with L!
Oh and before more people start crying about this: The counterweight can't be lifted off the ground when there is no heavy load in the hook! (which is logical and real!).
Hi there, this a 1984 Kenworth SAR designed and built only in Australia. It has a big 'n' burly Cummins inline 6, backed by an Eaton Fuller transmission with 12 forward gears to get the power where it's needed.
If you have the old version make sure to delete it from your packs folder
NOTE: This is an extensively modified version of Box5diesel's W900. I give massive thanks to him for the original truck and for allowing me to modify it.
There are several different trucks in the pack, however, to save space they all share the same mesh so you can only spawn one of each type at a time, otherwise the materials will collide.
I included the photoshop file in the pack as well, so it easier to make custom skins.
If you find any problems feel free to send me a private message.
Mesh of the uppercabin is made by Craneman
Other mesh parts are made by me
N/B axles are made by Craneman
what you get is:
Terex-Demag ac500 with ssl
Terex-Demag ac500 without ssl
Terex-Demag ac500 with 18m fixed jib
Terex-Demag ac500 with 30m fixed jib
Terex-Demag ac500 with 36m luffing jib
Terex-Demag ac500 with 60m luffing jib
Terex-Demag ac500 with 90m luffing jib
f1 or f2 = turn left or right
f3 or f4 = boom up/down
f5 or f6 = hook up/down
f7 or f8 = cab up/down
f9 or f10=counterweight systeem up/down press K too see it
f11 or f12=jib up/down
ctrl+f1 or ctrl+f2=boom1 in/out
ctrl+f3 or ctrl+f4=boom2 in/out
ctrl+f5 or ctrl+f6=boom3 in/out
ctrl+f7 or ctrl+f8=boom4 in/out
alt+f1 or alt+f2 = suspension up/down
alt+f5 or alt+f6 = outriggers turn
alt+f7 or alt+f8 = outriggers in/out
alt+f9 or alt+f10 = outriggers up/down
alt+f11 or alt+f12=cab turn
ctrl+alt+f1 or ctrl+alt+f2 = axle 5 lift
ctrl+alt+f3 or ctrl+alt+f4 = ssl up/down
ctrl+alt+f5 or ctrl+alt+f6 = ssl sidemoving
ctrl+alt+f7 or ctrl+alt+f8 = ssl ropes ssl till boomhead
ctrl+alt+f9 or ctrl+alt+f10 =couterweight boom up down only by versions needed with luffing jib
ctrl+alt+f11 or ctl+alt+f12=crab steer
i hope i have write all commands
look at the first post of ac500 topic for pictures how the counterweight systeem work (demag-ac500)
This is the trailer I started a ways back its not done but I am not continuing with it because I am working on something else. I also lost the original unwrap so I have to redo that and really don't wanna redo that. So I figured I would share at least what I have done if some whats to fix/mod what ever do so freely.
Only author is me.
Known problems-handle mesh twitch's, suspension is really stiff, ties are to tight
ZIL-135 BM-27 Uragan 9P140 launch vehicle and ZIL-135 bare chassis version
- if you downloaded before 2011. december 21. 19:00 GMT (or anytime before this note appearing) please REDOWNLOAD. Otherwise you either won't have the fifth wheel version at all, or the one with bugged wheels. Sorry for the inconvenience.
- fifth wheel version included. Keep in mind though, that most semi trailers might not fit it because of it's different position compared to normal semi tractors.
- the tires and rims are separate objects now, hence the rims won't flex anymore.
- custom engine sound. Sampled from actual Zil-135 sounds.
- some more skins.
i guess i can say merry x-mas now...
- normal mapping
- detailed exterior, flexbody, damage textures
- 8x8 drive with a unique wheel and steering layout
- good off-road capability, and no irrealistic performance
- alternate skin selection does not show up the first time you select it, only second time. Must be a RoR caching issue.
- when alternate skin is selected, material flare bindings (lights) do not work. This is confirmed to be a problem with the *.skin system.
This is my "LÃ¶schgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
Hier ist mein LÃ¶schgruppenfahrzeig 16/12 (LF 16/12)
Man kann die TÃ¼ren der Kabine sowie des Aufbaus mit den Tasten F1-F10 Ã¶ffnen.
Die Schlauchhaspel hinter dem Auto kann man anhÃ¤ngen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 Ã¤ndern.
Credits: Das Fahrzeug habe ich bis auf den FeuerlÃ¶scher und die Textur der Reifen komplett selbst erstellt