This my Goldhofer STNL3-Platform trailer "Speedy".
"Speedy" is a very flexible and light platform trailer.
CTRL+ALT+F1/+F2: lower/raise trailer legs
CTRL+ALT+F3/+F4: lock/unlock steering (lock for reverse driving or extending trailer/steering is locked when trailer spawnes)
CTRL+ALT+F5/+F6: extend trailer
CTRL+ALT+F7/+F8: raise/lower liftaxle
CTRL+ALT+F9/+F10: raise/lower trailer ramps
Note: All commads exept ramps are one-press-commands.
Hope you like it :-)
Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
- drop sides, to prevent falling loads (CTRL+F9/F10)
- fully working ligths
- avaible in 3 colors: red/yellow/blue
All commands are written on the front left side of the trailer
Ackermann Moving Trailers
Here are my moving trailers for both the Buessing and the Mercedes Moving Vans.
They have managed materials and material-flares, and are useing sections.
They're not loadable... just some nice trailers to pull around.
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system: skins-working
If this system is used properly then no need for my permission for skins.
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
All content is for use in Rigs of Rods only. Read the copyright file included in the zip!
This is a small map I built for my erectable wind engine.
- Contains all parts of my fully transportable and erectable wind engine. See included manual for button assignments
- A winding road to transport the windmill pieces
- A small train track with tunnels
- Nice looking textures and vegetation (Thanks for all your help DeGa!)
These are an update to Aperion's logs he made back in 2007. These are uploaded with permission.New: New Texture, with a bark texture (not debarked) New Weight (2T, 5T, 10T) DOES NOT OVERWRITE OLD LOGS.
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.
Kenworth Transfer Dump Truck
A transfer dump truck inspired by a request on the forum.
Credits go to Box5Diesel for his Kenworth truck.
For information on how the system works see the request and showrooms thread.
Feel free to modify, but use a different unique id to make it not conflicting with my truck.
Skins for Box5diesels Kenworth should work on this truck, but I'm not sure.
I've fixed a little bug with the material of the trailer dump box.
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
sputnik_1 for helping me with adjusting the node/beam.
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
- Length: 4900 mm
- Width: 3100 mm
- Standby: 10,600 kg
- Payload: 40,000 kg
*BUG FIX* LATEST UPDATE
I'd like to say I've fixed the "Big Tex Goseneck.load"
*ever sense .38's "Pinguinville" came out there have been various conflicts with the map's and it's own materials & meshes, merely the extent to which I altered the trailer is merely changing the mesh names to void such conflicts*
*-all credit belongs to the original authors!!! I only modified material names!!
*spawning errors on Pinguinville & Minima
*suspension is on the wheels,where it should be, not on the ramps
*the jacks raise and lower a little funny, but they work
*also added two axel version with (slightly) less moving when parked, and backing-up bug is fixed
the sliding-around-while-parked bug is still unsolved...if you have suggestions (or soulutions ^.^) to fix it plz let me know(PM me)
if any other problems protists feel free to pm, but remember i just fixed some bugs, skinning and stuff is tangycrose 's domain
All credit is held by:
tangycrose & Box5
Hello, I'm happy to introduce my first ever official mod to a trailer, It is a monster energy skin for the FEDEX 53ft Great Dane dryvan, Just throw it in packs, Because of the (1) at the end it will not overwrite, So enjoy, I hope it is a cool mod to you guys, It took about 3 hours to get it right... haha.
Here is a large I-beam load. It weighs at 12 tons. It can be loaded on a flatbed trailer and hauled to a construction site. It is also contactable so cars with a contactable submesh will be crushed by the beam.
'Feel free to retexture it, resize, make it smaller longer bigger or shorter. You don't need my permission for this creation.