I was bored, so I made a simple, just a nodes-and-beams-submesh toilet, that can be picked up with a crane and loaded onto a flatbed.
It has a contactable submesh, contacters and 4 ropables in the bottom and weighs about 1 ton.
No fancy stuff or anything...What you see, is what you get.
I uploaded this to the forums quite some time ago and now decided to upload it here. Discuss here
This is a skibox which can be attached to both tourliner versions.
The README.pdf is included in the zip.
Please post any problems and discuss here: NEOPLAN-tourliner
Unfortunately I made a silly mistake, so RoR displays ;V 1.0 in the select menu instead of the name of the box... You can cin a fix for that in the fist post of the thread you find above.
Ackermann Moving Trailers
Here are my moving trailers for both the Buessing and the Mercedes Moving Vans.
They have managed materials and material-flares, and are useing sections.
They're not loadable... just some nice trailers to pull around.
This my Goldhofer STNL3-Platform trailer "Speedy".
"Speedy" is a very flexible and light platform trailer.
CTRL+ALT+F1/+F2: lower/raise trailer legs
CTRL+ALT+F3/+F4: lock/unlock steering (lock for reverse driving or extending trailer/steering is locked when trailer spawnes)
CTRL+ALT+F5/+F6: extend trailer
CTRL+ALT+F7/+F8: raise/lower liftaxle
CTRL+ALT+F9/+F10: raise/lower trailer ramps
Note: All commads exept ramps are one-press-commands.
Hope you like it :-)
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
A pack of flatcars (standart 40ft, bulkhead 40ft and heavy weight 8-axle), all come with different skins.
The couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
If you enter a flatcar through the vehicle selection menu game will crash if you try to exit the flatcar, simply change into another enterable vehicle via the menu and exit there.
sputnik_1 for helping me with adjusting the node/beam.
Here's an odd load, a computer! I thought of this one day while I was looking on the repository for loads. It's not too bad on fps, but it's not great. I may work on this more, but I'm not sure about it.
Enjoy a flexbody computer to smash in Rigs of Rods.
Do you want a modifiable version so you can make any computer you want? If so, please respond using the discussion link below.
Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
Here is a Flat screen TV that you can load into the back of a pickup truck. It is contactable to vehicles that have a contactable submesh.
Included is a template to add your own image to the TV screen.
Here is a large I-beam load. It weighs at 12 tons. It can be loaded on a flatbed trailer and hauled to a construction site. It is also contactable so cars with a contactable submesh will be crushed by the beam.
'Feel free to retexture it, resize, make it smaller longer bigger or shorter. You don't need my permission for this creation.
Heres a new load for you all to have fun with
Its a big 2 ton (or it might be one ton) coffee cup.
Mesh was made by Skyhawk. I colored, resized, and made the node and beam structure.
Fully contactable with ropeable nodes on top and bottom.
In a game where approximately 99.9% of the players like to see things get destroyed, mauled, smashed, torn to shreds, incinerated, devastated, set on fire, and blown up, a load like this is more than necessary. Oxsergy and I (Beolex) bring you the Destructible Barricade. This is a meshed load which makes a good backdrop as scenery to your terrain, or just eye-candy for you masochistic freaks that like seeing things get destroyed. It is a tri-section load, meaning it has two legs and a board that can all rip apart for your disastrous pleasures. It is recommended that you pre-place it on a terrain so it is permanently there whenever you run the game, but it is also lift-able (via crane/boom) and can be placed in the bed of a vehicle and secured, too. However, to keep this barricade realistic, it needed to be semi-weak so it can be destroyed by most moving forces. As a result, hauling/lifting this with machinery can result in the barricade breaking, as it is fragile.
Beolex - Mesh creation and texture work
0xsergy - N/B structure and refinement/finalization
This is a pack of wooden crates. I have attempted to make them sort of high-detail and I think I have succeeded for the most part. There are many variations inside, so look at the list below. In the future I am willing to make more requests for different versions. These crates have a 'hooking point' for cranes and also have 'ropables' so you can fasten them to other vehicles. They also include a submesh so they can be contactive with other submeshes/contactive structures. They emit really good framerate because of the simply-low node/beam count. They can be used in groups without affecting your framerate heavily. There are many versions, too.
Beolex - 3D Modeling/nodes & beams/texturing
Venem - Assisting with beam color
This is my new lifting equipment for lifting a concrete floor.
The lifting frame will automatically attach to the floor when they are close togheter!The floor can be detached with CTRL+ALT+F9/10. Be sure that your crane has forwardcommands otherwise this won't work!
These are an update to Aperion's logs he made back in 2007. These are uploaded with permission.New: New Texture, with a bark texture (not debarked) New Weight (2T, 5T, 10T) DOES NOT OVERWRITE OLD LOGS.
This is something that I've been meaning to make for quite a while, a revamped version of my first scratch-made creation for RoR.
Working suspension parts
Working lights, courtesy of the materialflares system
Opening ramp (Ctrl+F3/F4)
Working jack, to make trucks of most heights haul this (Ctrl+F1/F2)
Lots o' ties to keep the most unruly load secure (ropables not included and must be present on the vehicle you are securing)
Plenty of room for even the biggest of your toys (10ft wide x 11ft tall, and 20ft long. It also comes in a 26ft long version)
DODGE charger (Me) - Everything
Off-Roader, Excisionized, and ShawnVallance - Beta Testing (A big thanks to them)
Added moving jack
Fixed gap issues with the ramp
Made a basic colors skinpack (Includes Black, White, and Blue skins)
Made an official Dura-Built skinpack
Increased stability of trailer (Doesn't shake as easily)