This is a "equipment cart decontamination. "
He is one here in Germany, the dews of the civil defense vehicles.
I'm here once the GW DekonP geskint of the ABC-coating district of Aurich.
Kenworth trial truck based around a w900. The pack contains two options- regular and FPS. Features open, split and locked diff options. Low gearings for offroading and crawling. The regular version also has flexmesh tyres.
Thanks to Box5 for the original meshes and chassis.
This is a Peterbilt Cabover with a halftrack system. You can tow trailers with it, I had 60tons on it so far with no trouble. This is my first vehicle built entirely by me, its not fast or perfect but it works have fun it and please dont mod with out my permission
This is a Peterbilt Cabover with a halftrack system. You can tow trailers with it, I had 60tons on it so far with no trouble. This is my first vehicle built entirely by me, its not fast or perfect but it works have fun it and please dont mod with out my permission
this is the extreme offroad version of the toyota 75 serie
thanks to i_so_live_here for the orginale
its made to crawl and bogger
when you use the diff lockers put them off when not needed
and dont give full power or it will spin its wheels and loos traction
i made a rollcage on it
and put bigger wheels on and lifted it
Here is a release of my Toyota landcruiser 75 series.
it works well on land, and once you have got it, please feel free to comment on whats bad and whats good, i know there are a few bugs, like the side lights at the front, one side is not fully supported but, you dont really notice it, and there is a invisible side around the tray for loads, so make sure to lift what ever your going to put in the back high.
the bar, tray and tow bar have there own mounts to the chassis so if you dont like some thing, and you know how to use it, just delete it, but use caution, it may stuff up the submeshing.
This is my newest truck, i do all the body style,rims, engine,trans, and wheel drive. this truck its only aviable in gray an have 20's inches oem rims with continental tires. enjoy the nissan. coming soon the video.
body(me)
base truck and material(bartolomeoP)
Into this file there are:
- Original OTTAWA with mesh wheels
- 3 Off Road OTTAWA with different front suspensions!
Credits:
Rims are from the DONOTEAT Metro D
Ottawa has been created by Unknown (?)
Suspension Mods are my work!
The off versions can't be used with trailers, because of their rear soft springs!
The 4 wheel drive version have this kind of diffs:
they start with all open;
press w and all split
press w and rear locked, front opened (obviously appear 'Open')
press w all locked!
Here it is my first vehicle entirely made from me. It should look like the Rancher of Vice City.
All the thing was made in 1 week. So don't expect anything great.
This is the Unimog from my avatar, which I made way back in 2007 but never really finished it.
Despite that, I still recieve questions about where it can be downloaded - so I decided to finally upload it here
Please keep in mind that it was originally made for RoR 0.31a and updated to use (well, at the time) break-through 0.32 tech (aka. flares )
It features a crappy suspension, a tipper which can be operated by F3/F4 (lower/raise tipper) and (F5/F6) close/open backboard and two (!) trailer hitches (front/back) which actually work (in 0.38, that is)
Please enjoy, mod as desired, comment on it here, but most of all: have fun!
This is not a crawler, its more of a normal acting lifted truck with not as much articulation and better street manners. I wanted to improve my original 94 Dodge into somthing i'd use more, so I added some axles, exhaust, emissive lights, new lift and tires, color, and 2500 rear fenders. It works well offroad if u drive like a real truck would. Personally I like it alot more now, so I hope you guys do to. You dont need any other files for it to work, it's self contained in the Zip.
The truck will appear in the Offroad truck section at the truck selection screen.
Figured I would release a early version of this beast.
It is a 8x8 Oshkosh Hemtt
Features
-Mesh Body
-Animated windshield wipers
-Animated Gimbal Steering Wheel, and Gauges
-Fully independent suspension
-Realistic weight of 38,800lbs
-Realistic top speed of 58mph
-Tinted windows
-4 speed transmission
-Lockable Diffs
Animated windshield wipers controlled by CTRL+1 for low speed and CTRL+2 for higher speed. Remember to shut off one before starting the other.
'Rocksnorter' - two versions of a crawler: one with RWS the other without
'Gobin' 500 - a racing buggy/truck with dash shift lights: activate with ctrl+1
Requires RoR version .38.24 or later
Credits to:
Lenni: for the use of his wheel rim and fuel tank meshes
Box5diesel: for his Cummins engine mesh
Fat-Alfie: for allowing me to use his steering wheel
Simp: for his tyre texture
this is my baja liebherr pack. it has 2 versions: baja liebherr offroad and baja libeherr hauler.
CAUTION: the baja liebherr offroad version is insanley fast and you crash easy if you dont know how to drive (but thats the fun part) and it breaks easily
the baja liebherr offroad likes to do burnouts in fully manual reverse hehehe
BUGS:
Im sure you all know that the tires are really soft, well, ive found a solution.
Open up the bajalieb file and scroll down to wheels,
look for the numbers that say 85000 and change the to 8500000
this will make the tires harder
creds to aperion and me (aperion for making the truck and me for modding the heck out of it)
This little beast is alot of fun. It's built extremely tough to withstand a Baja map that i'm working on. I didnt want it breaking halfway through a race and having to restart.
Its alittle drifty, meaning it spins out sometimes if u land off or give it to much throttle in a turn. But once u get a feel for how to drive it, u can control it well.
Jumping can be controlled in the air with throttle and brakes. If the nose starts to drop, shift to 6th and give it full throttle until it levels out. And if the nose starts to lift up to high, just tap the brakes and it will lower the nose for a nice landing like u would on a dirtbike in the air. Again, it'll take some practice but once u get the hang of how to control it in the air u can land some really big jumps.
Has 6 headlights, so driving at night is fun. Enjoy
a mod to box5's trophy truck (not on the repo, but a dead thread)
wieghs about 1.43 ish tons
the full fender version has meshwheels off the prerunner [read more]
A nice has some weakness to it but it is good in other ways. If you put a cab or anything to it the frame will need a syntax added or additional beams. This is incomplete.
Bowler Wildcat 200; Offroad racer that is very fun to drive (on the Baja Track )
This is my first vehicle, so I hope you are not disappointed.
Unzip into your data folder. The Wildcat will not show up in the game if you just drop it in your packs folder.
Credits go to:
Adeodat and Bartomeo: (I hope I spelt these correctly) for the Jeep Cherokee chassis the car is built around.
Qer: For fileing, flares, emissive, and additional mods/fixes/advice.
Well here it is
My buggy
This buggy has been a learning curve for me and helped me learn how to colour meshes and place them. An immensely huge thanks to TheTitan08 for teaching me how to colour meshes and stuff
This is a very percice sand rail shocks all work and no problems with it.it is very strong this is just a beta last version will have a mesh
do not mod without permission credits go to me
Caterpillar D9H bulldozer. Version 11.
Two models are included:
-D9H crawler for towing trailers.
-D9H dozer with contactable blade, ripper and winch.
What's new:
Tweaked springs and shocks for much more grip during offroading.
Fixed some small submesh issues imperfections.
Fixed a problem with the skeleton view ("K" key).
If you have previously downloaded the Caterpillar D9 from the repository then you will have to delete the old D9 zip file from the packs directory.
These are the first three trucks i've ever built from scratch, so they may not be perfect. None of them are skinned yet, so if anyone wants to, that would be awsome. I built one for rock crawling (rock jeep), one for hillclimbs (beast jeep), and one for jumping and playing around on the baja track (jump truck). PLEASE LET ME KNOW WHAT YOU THINK, Enjoy
Crawler Truck with hydrolic adjustable suspension.
I wanted a rock-crawler with live-axles, diff-housing and the shocks not mounted on the wheel-node, but I didnt have a body for it.
So I decided to stick the axles and suspention under the Daf Semi. That presented another problem: the top-heavy body would fall over.
Fixed that with left and right independant hydrolics: they wheel/axle can move up, but downtravel is limited to the lenght of the hydrolics (commands)
- if you get stuck, play with the hydrolics, which may help
- it is possible to flip the axles when landing from a jump
- the suspension still shakes a bit. It worked fine on the empty chassis, but the truck with the same settings does not. (Couldnt cure it)
(The cab-textures are copied and resized from Questnls Ginaf)
Technical notes:
Each wheel has 2 hydrolics (commands): from axle to extra-node and from extra-node to body. This allows them to bend in the middle to make them shorter, but they cant get any longer once the angle is 180 degrees. By making them shorter you can keep the body straight on-road, and making them longer allows more wheel-travel.
Introducing the fix version of the Jeep Wrangler Unlimited
Been in progress for about 10 months
This is a Fixed version for the newest version of RoR. There is no longer a selectable skin. Until there is a new system of selectable skins its the Jeep Green.
The suspension is also updated and is acting more realisticly
Features
+Flextires
+Animated steering wheel
+Animated Shifter(manual transmission)
+Animated locker shifter
+Animated parking brake
+Animated Locker on Rim
+Animated gauges(Speed,Tacho, and gas(it just goes down slowly))
+Choosable Skin color
Credits
Meshs, N/B, and prop placing - MICRACER
Suspension, N/B tuning, Weight tuning, engine tuning - LIFTER
(Thank you for all your help)
This is a ford f350 dually with a 7.3powerstroke turbo diesel it will do all your hauling and is great offroad.
authors box5 diesel for the truck me for the mod and RORCAT for the sounds
This is a ford f350 dually with a 7.3powerstroke turbo diesel it will do all your hauling and is great offroad.
authors box5 diesel for the truck me for the mod and RORCAT for the sounds
This is my crawler. It crawls stuff. Also my first ever working N/B. I know, it has no mesh, the N/B isn't perfect, it rolls over if you turn over 20mph blablablabla. If you don't like bare N/B chassis', then don't download and post a 1 star rating because it doesn't have a billion poly mesh and complicated crash physics.
Caterpillar D9 bulldozer. Version 3. Fixed a problem with a duplicate material name.
Two versions are included:
-D9 crawler for towing trailers.
-D9 dozer with contactable blade, ripper and winch.
OLD VERSION!
Dodge1500, finally a official >0.33 release, insane amount of things added, deleted, modified and fixed, place the file in your packs folder and play away..
There's 2 versions, complex and simple, only use complex in singleplayer AND if you got complex tyres enabled, otherwise the wheel meshes will behave weird.
Fliprights on F9-F10, towhook adjustment on F11-F12
This is the offroad version of my bouncer truck. No hydraulics on this one tho, except the rear for towing (still has good sus. tho). This one has seats, a dash, daul side exuast, a cummins, different tires, bulge fender flares, some logos, an ok suspension system, and a hitch. It performs ok, not the best tho, I think its still fun. It def. looks good , Enjoy
F1-F2=raise/lower rear (primarily for towing)
GW-DekonP.zip
view details
)
, Enjoy
Gold
Silver
Bronze
