YOU MUST HAVE AT LEAST 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION.
Updated with modeled panel gaps! Fixed UV mapping on Army version!
1949 Ford by Gabester
The 1949 'Shoebox' Ford was the first all-new design to come out of Ford after the war, featuring a stylish aerodynamic body shape and sophisticated independent front suspension.
Features:
Realistic performance
Detailed flexbody
Full interior
Collidable submesh
Custom sounds
Separate detaching parts (hood, fenders, doors, trunk, headlights, and bumpers)
Five versions (Club Coupe, Moonshine Special, Tudor, Fordor, and Indiana Jones US Army)
Flextires
DO NOT modify this without my permission.
You need a fast computer to handle this car. Requires .38.33.
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK IN AN OLDER VERSION OF ROR.
Updated with improved suspension, handling, and crashing behavior! The exterior camera is also now correctly centered on the car.
Gavril Zeta by Gabester
This is a compact SUV.
Six versions:
2WD
SWB
LWB
Crawler
X
R
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the R and 2WD)
Flextires
ABS and traction control
Meshwheels2 for sharper handling
Please DO NOT modify this without my permission. Thanks.
I present to you, the 1915 Ford Model T. This holds the name of the oldest real car ever to be put into RoR. This is the Original "Go everywhere, anywhere" car.
There are 6 versions. There is a Pickup truck (2WD and 4WD), a Sedan, a Coupe, a Touring, and a Junker version. The gear ratios/axle ratios/wheel size/engine power/top speed are all real specifications. The top speed is a physically limited 40 MPH on the dot for all versions except the power-degraded Junker. The Junker's top speed is closer to 30. All versions except the Junker have 21 Horsepower. Junker has around 18. You cannot drive this car in Automatic Transmission mode, as the gap between 2nd and 3rd, then 3rd and 4th are too large for the game to gearshift between them correctly. Thus, you must drive in Manual or Fully Sequential gearbox mode to get up to cruising speed.
These vehicles are not flexbody, and each on average have between 10K and 20K polys total including all 4 wheels. Honk the horn for a sound only '10s - '30s Fords can produce. Aoooga! Sometimes when you turn, it heavily understeers because the front axle is not very strong, so be careful.
Custom sounds are thanks to DODGE charger (thank you!)
All meshes and N/Bs are thanks to myself, Sirendude2011.
Do not mod this vehicle. Treat this like you would a real Model T 100 years of age. Would you (attempt) to hellaflush a Model T? No, so don't do it. Same goes for hydraulics and lifts with mud tires. It is impossible to skin it with anything except solid colors (no designs), so don't try.
Enjoy this historic vehicle! The driving experience is like no other vehicle in RoR history, believe me.
6/4/2013 UPDATE- improved, non-headache-inducing engine sound loops, horn can now be honked properly!
Do not edit the MESH in any way shape or form without my permission. If you want to use
the n/b all I ask is that you PLEASE consult with me first. Public or private. You are free
to make custom colors, change the motor, wheels, etc. But do not edit the verts on anything
here in this zip.
Credits:
darn_it: Main 440 engine and U-joints
eclipse/faustknight: Rear Dana 60
Tenderpaws: Transmission
ADR's Carmageddon 2 cars: Some textures
Mythbuster: Support, a lot of testing, and being there for rebounding ideas.
Jaw-4: Testing, support, and being someone to talk to.
PRT-Audiman: Sound and tuning help
Skyhawk: Mini's
Jaimswallace: Awesome teaser video
Dkutch: Everything else.
Simulation Info:
the junior go kart is set up to be easy to handle
the pro go kart is much harder to drirve
at low speed you need to turn in the opposite direction that you want to go and THEN turn in the direction you want to go because of torque steer from the solid rear axle
also when the gokart resets that means that the accident would be fatal
and if the steering wheel flips over that means that you either damaged the kart beyond return or you did the previously stated and also broke your arms
and if you flip the kart over and it starts spazzing then you have crushed the rider
This is a FINALLY released pack of tow vehicles COMPLETELY made by Thatsnice. I recieved this file with the request of doing flares and easing up on the FPS Drop.
Authors: Thatsnice (Node/Beam, Meshes), PArescueEMT (Flares and mesh editing)
I am releasing this with permission from TN as this seems to be a sought after mod.
This is the final and last version of Nissan 350Z for Rigs of Rods.
Even if the original submesh model of this car is more than 2 years old its still a headturner!
Since then I edited the nearly everyday to make it look, sound and feel like its real counterpart.
Here are the most important notes:
- the body and suspension is a RoR classic setup made out of a nodes, beams and a submesh
- the engine is tuned to behave like the original one
- the transmission should be shifted manually and has real gear ratios
- the car can easely go to 250 km/h
- the suspension is set up for both drifting and highspeed stability
- the sounds are carefully collected and mixed so can get that good V6 sound in your ear
- i havnt include a tire sound. it got annoying after a while
- there is also a roadster/ convertible version in the file
- and many more things...
I havnt a specific forum tread for this car. If you have questions or want to mod the please PM me.
UPDATE
added Traction control, slope brake and the sections parts back in so you can choose different colors within the menu when loading the truck.
UPDATE2
fixed the spelling mistake on the ropables so they all work now
UPDATE 3
fixed the material file error and added a few visual enhancements. made the axles and springs black and chromed the diff covers and driveshafts
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
Hello, I'm here to show a skin that created the MB Atego COMAX, with permission of the coco, the company's Brazilian postal service called Correios or Sedex.
Show some pictures and hope you like it.
Credits to Coco and Pedro, creators of the vehicle. [read more]
well here is my first upload the the repository its a skin for the Mercedes-Benz Atego with CoMax-Body&Lift V2 the skin is for my company called rormart. you dont have to sign up to get the skin if you do wish to purchase or sign up here is the link: rormart
to install just put the DDS file in your MB-Atego-CoMax.zipMB-Atego-CoMax.zip and your done [read more]
Credits first of all to Box5diesel for his 1stgens
These do not replace any originals.
Three new meshes for you to have fun with.
Install instructions: For .36 put it into the documents rigsofrods packs folder
For .35 unzip original 1stgen and then unzip this one into trucks folder
Thanks to all who enjoy my mods.
Next update will be new textures and improved chassis for dump box and utility truck.
Issues with trucks: two have the window a little off I did fix it a bit but if you want fix it and pm me.
Scania R 420 and R 480 Topline trucks, two different skins included.
Updated, doesn't use sections anymore.
Installation as usual, put the file in mydocuments/RigsofRods/packs.
If you have the older version then please remove it (this doesn't automatically overwrite!)
Works only in 0.36 and above.
All mesh and node and beam parts of the model are made by me, credits to pedro for the steering wheel texture.
If you want to reskin it make sure it doesn't conflict with my original pack in any way and contact me on the forums before you release any derivates of that model.
Only use one version of the truck at a time, more might crash the game.
I am not responsible if you mess up your RoR by installing or using this truck in a wrong way.
THIS IS A SKIN MOD FILE OF THE 78 DODGE POLICE (CREDITS GO TO ORIGINAL DESIGNERS) IT IS AN OHIO POLICE SCHEME BASED OFF A SMALL GEAUGA COUNTY TOWN KNOWN AS CHARDON. I TOOK MY TIME TO GET THIS TO WORK MORE UPDATES OF THIS WILL COME AND REMEBER I AM NOT THE MESH DESIGNER IM JUST THE SKINNER. HAVE FUN IN AN OHIO POLICE CAR. WILL OVER RIGHT ORIGINAL 78 DODGE POLICE. OH YAH AND IT HAS 2011 CHARGER TAILLIGHTS. I like to make scenes with this and my dart in it.
"Pay up, or get licked"
This is the 2008 Sterling Bullet wrecker from Lizard Lick Towing and Recovery in North Carolina. If you've seen the show, you'll recognize this truck
2008 Sterling Bullet
6.7L Cummins Turbo Diesel
6-Speed 68RE Automatic Transmission
Regular Cab
Lizard Lick Towing and Recovery logos on the doors
Credits go to Box5Diesel for the original Bullet wrecker
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Platerpants"me"- skins
-Marco- skulls on skins
Brand and type: Mercedes Benz Atego Sleepwagen ANWB
Ingame name: MB Atego ANWB
Tested in: 0.38.57
This is an Standalone file!
I got permission from Lenni to release this back in April 2011, so I thought this would make a nice addition to the repo.
The ANWB is a dutch company that does most of the towing work in Holland. They basicly control the Roadside assistance branch.
The word ANWB stands for Algemene Nederlandse Wieler Bond.
"Pay up, or get licked"
This is the 2008 Dodge Ram 5500 wrecker from Lizard Lick Towing and Recovery in North Carolina. If you've seen the show, you'll recognize this truck
2008 Dodge Ram 5500
6.7L Cummins Turbo Diesel
6-Speed 68RE Automatic Transmission
Regular Cab
Lizard Lick Towing and Recovery logos on the doors
Credits for the original Bullet wrecker go to Box5Diesel
It is meshed, and much higher quality. Credits:
Pricorde - Original bus
Derbymutt - Revival, meshes, re-texturing, n/b fixes and changes, shader stuff
Fradias - Wheels & Tires
Modding Policy:
Modding and releasing any content for this bus on a mod of it or on another vehicle is permitted and encouraged as long as due credit is given.
Basically, Mod away and give credit.
Info:
It is fully skinnable, if you do not like the plastic paneling on the bus, just comment out agora_fb.mesh and agora_rear_lights.mesh from the flexbody section as well as the forset line below them.
It is also deform-able and flexbody.
I have also used flexbodies for the tires, so that they work in multiplayer and still are deform-able and separate from the rim mesh.
a reskin of the stock dodge. this is a 1974 dodge dart swinger designed to look like my dad's. it has aar cuda stripe that says 360 at the end. and has ralley wheels. all credit goes to the original designers of this car. and this will overwrite the original if you have it. if this will not load just aadd the .skin or .png skin fle to your original dodge folder in the name of what you want to call it. sorry if it doesnt load properly. you may just end up skinning your car.
After a LONG time working on and off I bring you this:
DAF XF105 8x4 Hauling Truck Original truck by Questnl
You may have seen previous iterations of this truck on this site before, but none as extensive as this.
Here is what I have done: -------------------------------
() Completely redid cab texture, from scratch
() New HD Wheel Texture
() Added Traction Control
() Increased power, & braking
() Added Anti-Lock-Brakes
() Added slope brake
() Using Wheels2, with user controlled tire pressure ingame
() Decreased Weight (more realistic now)
() Sharpened up steering
() Updated suspension
() Updated Help.png
() Updated preview picture
() Fixed translucent metal mesh
() Added Beacons
() Updated ability to raise/lower extra wheels
() Added user controlled lights (see ingame help on your dash)
() Added rear flares:
-Reverse lights
-Blinkers
-Brake lights
49ford.zip
view details
Gold
Silver
Bronze
