Hello! I am back with my 6th school bus sounds pack! This pack includes some parking brake sounds as well as some sounds from an 09 MaxxForce DT engine. These sounds are free to use so long as credit is given to me.
The pictures you see attached to this download were taken by me so I ask that you do not use them in any way.
I have always liked car sounds and in games I want them to be as realistic as possible. RoR uses a simple and quite effective system so I gave it a try and the outcome pleased me.
This sound most probably reflects a modern american well mufflered V8. Yet you can rev it really high and get that aggressive noise out of it.
The .zip contains the following files:
V8 Startup
V8 Idle
V8 Low
V8 Med
V8 High
BOV
readme
The installation is also very simple: extract, rename and overwrite. More precise instructions can be found in the readme file. The sound also has a mild turbo whistle so I decided to add my BOV file
for the ones that may want to use it.
I tested my sounds on three Gabster´s cars (hope he doesn´t mind) which are also in the video, therefore the best performance is also likely going to be with those three cars. Each cars´ sound system
is somewhat different so different cars may result in slightly different sounds.
Sounds are from: Northstar 4.4l LC3 Supercharged V8 and Ford´s 4.6 L SOHC 3-valve V8
It is my first upload so please don´t be mad with me if I screwed something up. And please don´t make mods of my mod.
It is allowed to use my sounds with your new car mods, but in that case please give the author some credit.
Hello! Khadner back again with my 5th school bus sounds pack. This time there are quite a few air sounds like air brakes and air doors. There are also some engine sounds. These sounds are free to use with credit to me. The photos you see here were taken by me so please do not use them anywhere else without my prior consent.
Thank you and enjoy!
PS, this has a bad rating because of idiots who are just spamming because they hate school buses.
This is a blended siren that is commonly run on Fire vehicles in the United States, It has a Federal Q winding with a powercall, hyper yelp and warble running as well. Enjoy! Goes great with the KME Predator.
Simply open the .truck file of the vehicle you wish to add siren to and see what the existing file is named, then rename the federal Q powercall to that of the existing file and replace the existing .wav file in the vehicle folder. (see thumbnail if need be)
This is a Sound pack currently Set up for Box5's dodge ram It is a 24v Cummins sounds I have recorded from my own truck Feel free to use them as you like Updated V2 with ignition chime
Hello, This is the my new sound-mod, this is not a soundpack,
because zip is don't have starter, horn, ect. sounds
---Tuned 24 Valve Cummins sound---
-->FEATURES<-- -HQ sounds (video from Cumminsman13) -2 Types of special RPM
-Special Turbo sound (from my turbopack)
-SOUNDSRIPT (the .truckfile lines in the zip)
Here is a less repetitive siren to replace the default.
I forget what exact siren this is, but this sound clip includes:
-Wail
-Yelp?
-2 horn honks
&
-Powercall (who doesn't love powercall?!)
When played behind the roaring engine of your favorite police car, this siren will bring your code 3 responses to life!!!
- - Features - -
-High quality sounds
-soundscript
-very high rpm sound - Nitro sound
- - Install - -
1.- Open the soundscript, and Enter your engine rpms for sounds
2.- save
3.- Put the sounds and soundscript files to your vehicle archive
4.- Open the truckfile, and add this:
>Features<
-High quality
-working doppler effect - sound is MONO
-great working soundscript
-How to install-
1.Put the my script to your car's soundscript file
2.Put the my sound to your car zip
3.open a .truckfile, and add my source line for "disabledefaultsounds"
4.look this-> Gavril Bandit 300 from Gabester
So, Here are some sounds from an IC CE300 Maxxforce DT (AKA the new DT466e) It is almost done, just working on making some force and turbo sounds and it will be done.
Hello, here are some sounds taken from various YouTube videos of school buses, converted to a format RoR supports. Most of the sounds are key turn sounds, but there are also brake sounds (Regular and parking) and engine sounds (IC FE). Feel free to use any of these sounds how you wish. No credit or permission is needed at all. Enjoy!
Note: These are just the WAV files. you still have to add the truck and soundscript file code yourself. If you run to any problems with these sounds just PM me.
This is a siren I had made along with "HappyLuy" who made "SirenOn",but Part of their siren was used in the addition of me adding to that siren.The sirens within this siren are the ambulance,powercall,whoop,intersection,& Air Horn.Please read the "read me" text that I put in if you don't know how to change sirens.
Author:EMS101 & HappyLuy for the "SirenOn file within the CoupleofSirens pack.
Figured i would let you guys have these since i have no use for them. This a 4 stroke complete sound pack the starter sound is a pull starter.
Includes .soundscript file.
Hello, this is a set of engine sounds from a Cat C7 engine complete with a soundscript file. I pulled the sounds off of http://youtu.be/HuRDbd673CI and I have tested them in RoR.
Enjoy!
Credits:
- Me for pulling the audio and converting it to work in RoR.
- Frontiertruck for the video I got the sounds from.
To install....
1) Place all the files from the zip into your vehicle's zip.
2) Add
66, C7
66, C7-start
to your vehicle's soundsources (One word) section in your vehicle's .truck file.
Note: The number 66 is the node number from where your sound will be coming from. You can change the number to any node number within your vehicle. I used 66 as an example though on buses and trucks, the number 66 may work.
If you have done what I did above and you have checked what you did and experimented with different node numbers and it still doesn't work, PM me and I will have a look. Don't PM me the files and say you did the stuff above in order for me to do it for you, because I will find out!
-High quality sound
-Soundscript
-Ideal for High rpm engines!
- - INSTALL - -
1.- Open the soundscript, and Enter your engine rpms for sounds
2.- save
3.- Put the sounds and soundscript files to your vehicle archive
4.- Open the truckfile, and add this:
THIS IS A SKIN MOD FILE OF THE 78 DODGE POLICE (CREDITS GO TO ORIGINAL DESIGNERS) IT IS AN OHIO POLICE SCHEME BASED OFF A SMALL GEAUGA COUNTY TOWN KNOWN AS CHARDON. I TOOK MY TIME TO GET THIS TO WORK MORE UPDATES OF THIS WILL COME AND REMEBER I AM NOT THE MESH DESIGNER IM JUST THE SKINNER. HAVE FUN IN AN OHIO POLICE CAR. WILL OVER RIGHT ORIGINAL 78 DODGE POLICE. OH YAH AND IT HAS 2011 CHARGER TAILLIGHTS. I like to make scenes with this and my dart in it.
Here are some Cummins engine sounds I got from http://www.youtube.com/watch?v=qVhSKUN2qpg so Thanks to HeresJamesPrice for uploading the video of his engine. The engine is an unspecified model. I used these sounds on dereksh97's daf 3600. Which you can see in action here.
Credits
DODGE charger(me)- Ripping the sounds from the video's audio
HeresJamesPrice- The Video
To install
Drop these files in the desired truck .zip and add sound sources to the .truck file of the desired truck.
Hi, I do a new real sounds for the opel rekord, this is only a beta, i have to do the parkingbrake but is a good start. The sounds is 100% real and record by me. The car was make by "mnc", but now mnc is not in the forum.
Special thanks to Lepes.
Car by mnc. 100% Real.
Instructions:
You have to owerwrite the files and put the sounds into the car .zip
This is a sound you can use in any vehicle you may like, it would would sound the best in a big mud truck, the sound is a 454 Chevy Big Block With A Isky Cam, it sounds awesome, i captured the sound from my buddies lifted chevy, i would love some feedback, the picture of the truck is the truck i got the engine sound from.
Well Here are 18 Different horns, including a .soundscript file. If you want to use it and release it in any of your mods, thats fine by me so long as you give me credit. All the files work you just have to get them in game(i'm WWWAAAYYY to tired right now to do it otherwise i would). Have fun with your new horns. More to come.
It's an old horn, sorry for the minor delay at the start of the horn.and sorry for the irrelevant pic, it would not let me upload the pic of the speaker i have.
I took a quick sound recording of my local fire department. This happend to be the ambulance siren. Follow the readme inside the zip folder to install the siren. Remember, this is for the Aspen Grove Ambulance. If you need help, just PM me.
Credits: Me Medic29.
Hope you like it.
Also, here is the forum for discussion New-Siren-for-the-Aspen-Grove-Ambulance
This is a Federal Signal Unitrol Omega 8001 Siren (What a mouth full!) that I have made for Rigs of Rods. I originally made this for Grand Theft Auto IV but I converted it to RoR.
This siren contains: Wail, Yelp and Hyperyelp.
Media:
Siren Video
How to install sounds
I am now taking Siren Requests! If you have a request, please email it to me at sharpresponse@gmail.com
This is a Code 3 Mastercom Siren that I have created!!!
This is a very neat siren and sounds very good on Police Vehicles. This siren Includes: Airhorn, Wail, Yelp and Hyper Yelp. I will soon be releasing an Ambulance version of this siren!
SevenThreeSounds.zip
view details
!!Peterbilt 351 Cummins Diesel and JAKE BRAKE with Train horn!! 
Thank you for DOWNLOAD
Gold
Silver
Bronze
