This is a mod to the BI3300 by BusMan1985. All that I've changed is the sounds. The engine has 2006 DT466 sounds and the others are from an International 4300 and an IC CE200
This is a 2005 International 3300. It has a 6.0L VT365 turbo diesel V8 engine and an Allison 2100 PTS transmission. It's built off the International 4200 chassis and is nearly identical to the International 3300
This is a mod to the BI3300 by BusMan1985. All that I've changed is the sounds. The engine has 2006 DT466 sounds and the others are from an International 4300 and an IC CE200
It is meshed, and much higher quality. Credits:
Pricorde - Original bus
Derbymutt - Revival, meshes, re-texturing, n/b fixes and changes, shader stuff
Fradias - Wheels & Tires
Modding Policy:
Modding and releasing any content for this bus on a mod of it or on another vehicle is permitted and encouraged as long as due credit is given.
Basically, Mod away and give credit.
Info:
It is fully skinnable, if you do not like the plastic paneling on the bus, just comment out agora_fb.mesh and agora_rear_lights.mesh from the flexbody section as well as the forset line below them.
It is also deform-able and flexbody.
I have also used flexbodies for the tires, so that they work in multiplayer and still are deform-able and separate from the rim mesh.
This is a 2005 International 3300. It has a 6.0L VT365 turbo diesel V8 engine and an Allison 2100 PTS transmission. It's built off the International 4200 chassis and is nearly identical to the International 3300
Here it is, the newest addition to the school bus selection in RoR. This baby is fully submeshed, flexbody'd, has amazing suspension, super realistic 5 spoke wheels, and a driver with a cap. Made by Jaw-4 and Dkutch. Enjoy!
Hello! Khadner back again with my 5th school bus sounds pack. This time there are quite a few air sounds like air brakes and air doors. There are also some engine sounds. These sounds are free to use with credit to me. The photos you see here were taken by me so please do not use them anywhere else without my prior consent.
Thank you and enjoy!
PS, this has a bad rating because of idiots who are just spamming because they hate school buses.
v1.2, see changelog
Here is a 1st Generation Bluebird Vision for under your tree! (or in your mods directory...)
Info:
The 1st Generation Vision was a type C bus made by BlueBird from 2003 – 2007.
Features:
-Animated props (including openable e-door and roof hatches)
-Changeable seat and floor color textures*
-ABS, slopebrake
-District name on the side of the bus
-Selectable 8-way types (dropdown in the spawn menu)
Gripes:
-The body appears shaky on the inside at high speeds (since it's not a flexbody it shakes rather than flexes)
Changelog:
-Fixed the left veer
-Added reflection in driver mirror
This should be the final final version!
*You can download different seat/floor textures here: Brown Black Green Red Blue Here is the PSD for the district name, making editing it with the same font easy.
Credits:
Brickman & Dereksh97: Original free-to-use-with-credit bus n/b
SBF- critiquing and suggestions
Khadner- CAT C7 sounds
ROR-EMS- CM300 Radio mesh
Carsonj493- BlueBird Vision 3D model
graysonk95- Making the bus!
PM me with any questions or comments. No mods, however, you may distribute customized textures, no permission needed.
Enjoy!
These are my Winnebago's I have been working on for a couple of months. Instead of basing them on a particular year, I just used the styling cues of the early 70's. More or less if these were real I would call them licensed reproductions(Though not really Licensed). Yes, they are made in sketch... But I feel that it is one of my best mods ever. Please keep the sketch comments to your self, I would really appreciate it. Now on to the credits...
Me= The main mesh's/converting/optimizing
Google= the sink in the large Winne
Arthur Hucksack/Creak and me= The chassis
csxgp38-2 Schoolbus version
Now on to business
1. You are allowed to mod these vehicles to any extent, even the mesh
2. You are allowed to upload mods of this vehicle here or any other RoR related site.
3. You are legally aloud to have fun and post pictures to you're hearts content.
CE3000 skins Hello everyone this is my 1st offical upload now i have done some skin mods on the CE 3000 all credit for the buses goes to the creator all i did was put up a thread and wait and now its done! so here it is.
Credits:
Gks7424 (for the bus)
CE3000 skins Hello everyone this is my 1st offical upload now i have done some skin mods on the CE 3000 all credit for the buses goes to the creator all i did was put up a thread and wait and now its done! so here it is.
Credits:
Gks7424 (for the bus) [read more]
Should work now, I have fixed the previous problem that prevented the engine to work. I also have been trying to enhance the suspension (on the Atlantic' version) but it is not finished and since I am not working on it anymore here is the update
It was Renault's successful coach during the 90's, here in its tourism version. This is a node-to-beam model with some meshes for details
The FR1 features :
- openable front and rear passenger doors, driver door and cargo doors
- chrome-custom wheels
- passenger seats and roof luggage compartment
- fully customized dashboard with working indicators (lights, brakes ans blinkers) and separated speedo-meter and rpm-meter
- front and rear passenger cameras
- custom mirrors, the right one is usable from the front-passenger camera
- 11 additional skins in the "skinned" version (you have to chose in the list and CLICK on OK to load one of them)
- a lot of fun to drive (rear anti-roll bar)
- ...
Install (0.36 and higher)
- Drag and drop your renault_FR1_GTX.zip in your My Documents/Rigs Of Rods/vehicles folder
Hello users of the rigs of rods forum, today I proudly update the FLC. Most of you know what it is, a school bus. many of you might be saying "aw crap, another CE mod." but, this is not the case. This has custom sounds, custom preformance, the ACX mirrors, newly positioned crossing gate, new flares, and new warning lights. credits for original CE go to the following:
So, I'll give you a little background knowledge on this bus.
I always wanted to drive a bus that I, and only I have dreamed of. I figured that I could find something on the site that was cool and wasn't just another CE. so I decided to read up on how to mod Rigs, it was certantly easier than other simulators I've seen in regaurds to modding it. That is how I ended up in this position with this bus. Please note that it is not fully completed so with that said, It still has no interior and only sub-mesh.
This update:
Updated sounds. Hooray! Feaetures the ASP flAilus, Enginefan vervion, and W/O engine fan sounds for the norm.
The newer authors to this bus would include:
Me (tomytom99): sounds, preformance, skins, and moving the crossing gate down.
ROR-EMS: mirrors and mirror placement
Here is the thread for the FLC: [link]http://www.rigsofrods.com/threads/91010-ASP-FLcolumbus-Once-Again-Updated-6-26-12-going-onto-repo[link]
More updates are coming, so be alert! once it is done, the will be a naedox quality video. Note: I will sometimes find a problem that you guys have. Most of the time you will need to find the problem, and I will fix it.
The bus now has about 15 skins, including dealership skins, a blank skin, and a NJDOC skin.
Bugs :O
will crash game in MP and also flatsville, in both sp and mp.
Ackermann Moving Trailers
Here are my moving trailers for both the Buessing and the Mercedes Moving Vans.
They have managed materials and material-flares, and are useing sections.
They're not loadable... just some nice trailers to pull around.
This is a Thomas Saf-T-Liner HDX and my first vehicle I have done all of the work getting it in game.
This is (as far as I know) RoR's first flexbody school bus!
The project is ongoing, so expect issues followed by fixes that cause other issues.
(Official Release 1.0)
Changelog
~Put the roof running lights back (still haven't placed the rear ones)
~Brought back proper collision (now collision doesn't cause weird shaking)
Known Issues
~The front wheel meshes aren't balanced (noticeable at high speeds).
~The bus is larger than most buses. I should have scaled it better when I had the chance.
~Rear 3 red running lights haven't been placed yet.
~Deformation isn't very realistic.
Backstory:
Ever since I joined RoR I've loved modding buses, and am one of the few 'bus people' who is sick of seeing a *BRAND NEW* CE300 mod every week... In order to make up for it I decided to make my own bus that was different, original, and somewhat high quality for my experience level. So I decided to make an HDX, because type D's are rare in RoR and it is very easy to model.
Don't bust my chops about it, its my first vehicle I've ever made.
Special Features:
-Animated props (including openable e-door and driver window)
-Flexbody (non-FPS versions)
-Working mirrors
-Changeable textures all over the bus (main body color, roof color, rim color, seat color [comes with pre-packaged seat textures], window color/tint, crossing guard front color, and bus #.
-TC, ABS [off by default], Slopebrake
Planned features:
-Working fans and other random animated props (after 39.7 is released)
-Under-body (currently there are no axles or anything)
-Fix the spikes on the bottom of the mirror
-Other small adjustments
-Convert all textures to DDS (my DDS plugin for photoshop doesn't work so it is easier to save as png for quicker editing)
Credits:
Sirendude2011- Making the n/b
School Bus Fans & School Bus Builders group- critiquing and suggestions
Nickster7- Meshwheels
TC2000FE- Engine sounds
Carsonj493- Mirror mesh
graysonk95- meshes, tuning n/b, etc, etc, etc, etc, etc, etc, etc... [everything else]
(Let me know if I forgot you)
This is a fine-tuned version of ArthurHucksake's chevy p30(or mighty mite). with starling island bus skin.
i'm not the author of the meshes and skin. i just fine tuned the .truck file.
this bus comes with a left side slide door and meshwheel, and 16seats
this is a fusion of the starling island P30 midibus, and the mighty mite.
All that I've done is try to make the bus as realistic as possible.
Credit for original bus goes to ArthurHucksake and Cydvx.
FEATURES
- realistic weight(about 3.4ton)
- realistic centre of gravity
- real front anti-roll bar,and fine tuned suspension
(all above make the bus handles much better,together with a much more comfortable ride)
-torque curve
-minor engine tuning
thanks for the authors for making the bus and skin
please send me a massage if you found any flaws, bugs. or if you have any suggestions for update. Thanks
ENJOY!
update 04 27 2012
- lightened meshwheel
- idle speed and torquecurve fix
- weight distribution and suspension setting fix
- engine tuned down for more realistic performance(this does not affect the top speed)
This version could handle and perform quite differently from the previous version, so please give me your feedback if you have any suggestions. thanks!
SBSoundspack7.zip
view details
Gold
Silver
Bronze
