A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
- drop sides, to prevent falling loads (CTRL+F9/F10)
- fully working ligths
- avaible in 3 colors: red/yellow/blue
All commands are written on the front left side of the trailer
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system: skins-working
If this system is used properly then no need for my permission for skins.
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam.
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
Dimensions:
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
Loading area:
- Length: 4900 mm
- Width: 3100 mm
weights:
- Standby: 10,600 kg
- Payload: 40,000 kg
Here is an inclosed bumper pull car trailer I made. The dimensions are: 7.62m or 25ft long, 3m or 9.8ft wide, and 2.4m or 8ft tall. Also it includes a .psd and .pdn texture map to make you own
texture. controls: CTRL + f1 & f2 = landing gear, CTRL + f3 & f4 = ramp
Credits
DODGE charger (me) = everything
Joebus = help with submesh
It can load 1x 40', 45' or 48' are also possible, but that may result in too much front and rear overhang and then the container might hit the tractor unit.
The other possibilities are 2x 20', 1x 20' in the middle or at the end with retracted chassis back.
You can extend and retract the rear end to fit different containers on, and it is possible to adapt the suspension to different heights and loads,
the command keys show up in the ingame preview.
There is also a version with two containers fixed to the trailer for people who don't bother loading or unloading it.
If you want to reskin it please use the GUID system and skinzip files, then you can upload your skins to the repo.
Don't modify anything else or use parts of it on other models without my permission please.
This is a mod to box5's goose neck. I made it shorter and made it have two axles. The mod was simply to make it look better when hauling stuff around. In my opinion the normal one is a little large.
Original trailer is box5s
Mod by me
And i know the mod isn't perfect. May over write the old one.
Original file http://www.rigsofrods.com/repository/view/585#comments
Features
- Detailed meshes
- Realistic buffers, coupling
- Custom sounds
- Animated stakes
- Hook system to fix your loads
Instructions
- Coupling is done by pulling up/down the orange cylinders (nr. 1 and 2) at the edges with your mouse. Click here for a tutorial
- You can fix your loads by pulling down the orange cylinder nr. 3
- When you are in a locomotive, use Ctrl+F1/2 to retract the collision box and Ctrl+F3 to flip the stakes
Credits:
- Sputnik_1: meshes, node and beam, sounds, textures
- BigBoy: much help and testing, thanks a lot!
- The Inviteds: testing
This is not compatible with BigBoys Bombardier ALP!
This is a trailer I made from Pricordes semiflat. The main middle frame is the same, but u can see the changes. It has tie downs in numorous spots for vehicles of all sizes. Gooseneck style hitch and neck, new texture, new ramps, and it can fit the behemoth (barely), lol. This was to be a pack with the duece, but I might attach it later to the duece so u can tow it around in multiplayer.
*BUG FIX* LATEST UPDATE
I'd like to say I've fixed the "Big Tex Goseneck.load"
*ever sense .38's "Pinguinville" came out there have been various conflicts with the map's and it's own materials & meshes, merely the extent to which I altered the trailer is merely changing the mesh names to void such conflicts* [read more]
A simple reskin of the 45 foot trailer made by Donoteat.
It is a arctic cat skin showing alternative decals than the original.
Credits goto Donoteat for the trailer.
Skin by:ME
Dry van with mesh body. There are some chrome/reflective parts, mesh wheels, a bunch of side marker lights.
F1 and F2 for the legs.
It has a node and beam skeleton with invisible polygons for collisions. I tried to keep the polygon count reasonable, it shouldn't be too hard on performance.
(The fender-brackets could have been made with less polys while still looking the same)
The trailer's width and height are correct, but it is a bit too long.
The main texture is a png, not a dds. I tried several ways to convert it to dds but none of them worked. Bad colors or edges, it just didn't look right in game with a dds texture.
A generic european style foodstuff tanker trailer.
Be careful when driving, it behaves like a partly filled trailer and tips over easiely!
It can be modified if the modified file is really independent, if you want to make a skin only you should use .skin files or release the texture file only.
If you need help with making an independent mod please contact me.
Give credits when modifying or using parts of this trailer!
This is my Car dolly. It is straight submesh and very easy on FPS. This is more of a proof of concept as apposed to a full on new modification. You can use almost any vehicle to tow any other vehicle. Since it is submeshed you can scale it to be used on any vehicle rather easily. As of right now this is considered to be in beta. On a side note it is currently impossible to tow any vehicle with contacters. You will have to comment them out or watch them be destroyed by the wheel clamp.
Also feel free to modify and redistribute. Credit is not necessary but it is appreciated.
This is another mod for the Dryvan Trailer, only this time, it is a McDonald's trailer! So far there are no problems loading the trailer itself, so all you just do is just download and play! Btw, place it under packs/streams/vehicles for it to work properly. Have Fun! Credits: Trevor for the trailer, and me for the skin.
Also, delete the original dryvan trailer because this one overwrites it.
This is my first upload, its a mod to Box5's gooseneck, I used his n/b and Pedro's meshwheels, neck is shortened, and the submesh is supposed to be impossible to pierce. the other meshes are all made by me.
Thanks to:
Box5 for original file
Pedro for meshwheels
Squishy and Lilgti for support
All others who have put up with my questions for so long
This is a blue reskin for the Selfsteering Trailer and Dolly by lenni
i have used the skin system so just drop it in packs and it will work.
also because i used the skin system i am automatically allowed to upload this, as lenni said.
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder.
This is a Walmart skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder.
nooteboom_teletrailer-T42.zip
view details
Gold
Silver
Bronze
