8x8 Tatra truck but this time in monster shape, adjusted shocks/added shocks, engine parameters changed, suspension height changed, some reinforcement done, massive soft swamper tires.
All my hummers (and the dolly/trailer), neatly wrapped up into a single neat little package.
Includes never-before-released versions of the monster truck and trailer hook hummer, and some skins might not have been released.
Enjoy.
also, FRICKIN PM ME BEFORE RELEASING STUPID MODS!!!!!
this is just a mod of Stigerns Carawagon. it has a much more powerful engine and more powerful brakes, and is very capable offroad. beware, tho. the suspension likes to break if you push the wheels too hard towards the center of the chassis, so be careful when flipping it over with the mouse (if you need to)
Hello, this is version 2.00 of my AE86 Rally, it has a new engine from the 4x4 UMM Dakar and 2000 kilos of weight to keep it stable, it still needs a new skin cause nobody made one for 1.00, if anybody makes a new skin please host it on the repo and the best one will be in the next, complete release, have fun with it!
Live axle monster tatra t813.
Kinda like the monster tatra below, but without the rubbish-for-monster-trucks half-axle suspension design
Changes from stock:
Widened backbone
Changed suspension beams around to simulate live axles instead of independent half axles
Made axles longer
Hubs wider (spread each wheel node apart)
Bigger wheels
Moved front axle forwards
Moved rear axle backwards
Added rear steering for low speeds
Crawler Truck with hydrolic adjustable suspension.
I wanted a rock-crawler with live-axles, diff-housing and the shocks not mounted on the wheel-node, but I didnt have a body for it.
So I decided to stick the axles and suspention under the Daf Semi. That presented another problem: the top-heavy body would fall over.
Fixed that with left and right independant hydrolics: they wheel/axle can move up, but downtravel is limited to the lenght of the hydrolics (commands)
- if you get stuck, play with the hydrolics, which may help
- it is possible to flip the axles when landing from a jump
- the suspension still shakes a bit. It worked fine on the empty chassis, but the truck with the same settings does not. (Couldnt cure it)
(The cab-textures are copied and resized from Questnls Ginaf)
Technical notes:
Each wheel has 2 hydrolics (commands): from axle to extra-node and from extra-node to body. This allows them to bend in the middle to make them shorter, but they cant get any longer once the angle is 180 degrees. By making them shorter you can keep the body straight on-road, and making them longer allows more wheel-travel.
Monster police car from the topic MONSTER POLICE in light vehicle showrooms
bounce some what and is slow witch is good because its tippy if you push it too much
fairly strong ITS A MONSTER =)
Edit:change the idle from 7200 to 1000, that will fix the transmission issues, lol.
I did not build this truck, I just put a lift, new wheel face, bigger tires, and new Skins on both these Dodge rams. One is a Red 3rd gen Dodge with a 4-6" lift, the second is a 2nd gen White Single cab Ram with the same lift and tires. Thanks to the builder of this truck, it\\s a great platform.
This truck is really fun doing slow technical stuff offroad, it performs like a real truck.
Also the 5th wheel hitch I raised to high and the editor kept freezing on me so i couldnt get it back lower, but the suspension isnt setup to tow, you need to stiffin the rear suspension in the truck folder, but this is more of a offroad truck. You can put these skins on the stock lift truck and stiffin the suspension in the rear for a great tow vehicle. Either way, enjoy the new look and style of the Dodge.
This was my third attempt to get a working vehicle crusher into RoR. 2 pairs of geared wheels - the top pair reduce larger, more stubborn vehicles, the bottom pair are closely meshed to shred the vehicle. Drive the vehicle into the hopper, walk over to the ramp area to take control of the shredder. Use F1 to pull the vehicle through and shred it, F2 to back up the shredder for whatever reason. You shouldn\t need throttle. Vehicle *should* get dumped out of the bottom. Vehicles will need modifying for contact, there\s a damageable version of the Paris-Dakar to get you started. This is released as-is although I might develop it further if we get more optimized collision detection in a future version of RoR.
Known issues:
- The vehicles still don\t shred (they go all floppy), and they sometimes get caught in the bottom rollers, you should be able to reverse the rollers a few times to free them.
- Expect miserable fps, I was down to 5 and under with just the Dakar, if you have a dual core you might be more lucky.
Spawning:
This will need spawning onto the map. To make it spawn in Aspen, paste this line into your aspen.terrn file, it will spawn beside the main road near where the loads are:
Ein deutsches HLF mit Schlingmann-Aufbau. Fahrgestell ist auf M-A-N. Einfach nur downloaden und dann in C:/Boot/Programme/Rigs of Rods 0.32a/packs einfügen. Grundmodell beim Ersteller. Das ist der Firetruck, der sowieso schon in RoR war. Einen entsprechenden Sound könnt ihr unter "Audio" downloaden. Das bringt dann das richtige "Deutsche Gefühl".
This is an german firetruck. Base is the Firetruck from RoR. If you download it, you must place it in the "packs" folder in RoR. If you want a original German feeling, you can download an sound under "Audio", this is the sound to be.
well i wasnt going to release it yet until i got help with skinning it but i couldnt so im releaseing it now. Feel free to moddify it and re-release just give credit where applicable. for a bit of a SPECS list on it: 66" tyres
4 wheel drive and steering for more discuss here
things that need fixing:
camera node sits on ground
shock tend to snap after a few jumps
no skin
exhaust node not done properly
zero node is in wrong spot for spawning so either fix it or you will have to place inwhere the wrecker is on a terrain file OR use a map with no truck stop
many thanks to bonehead for helping me out with the wheels
and zippy for lending me his awsome monster truck tyre skin
"full truck"kthis is a chevy half ton the original builder is etholakson and i casey98 just did mods to it..have fun wb if you like it or if you want me to change anything
Jeep once more... Ambulance :-)
It has:
- redone all textures (manually by me: body, wheels, emissive);
- working lights (brake, side markers x 6, reverse);
- Ctrl + 1 turning on strobos (flashes). 2 x white and 2x blue in front grill, 2 x red in back lamps.
It has:
- redone (once more) all textures (manually by me: body, wheels, emissive) - it is face-lifted model;
- working lights (brake, side markers x 6, reverse);
- Ctrl + 1 turning on strobos (flashes). 2 x white, blue/red in front grill, blue/red LED on back window.
OLD VERSION!
Dodge1500, finally a official >0.33 release, insane amount of things added, deleted, modified and fixed, place the file in your packs folder and play away..
There's 2 versions, complex and simple, only use complex in singleplayer AND if you got complex tyres enabled, otherwise the wheel meshes will behave weird.
Fliprights on F9-F10, towhook adjustment on F11-F12
Nice Jeep Cherokee. Rebuild version of adeodat Jeep.
Changes:
- Redone chassis: front bumper, hood, windscreen.
- New engine, gearbox and brakes. Car is more handly and faster. 1 and 2 gear give u possibility to cruise .
- All textures are completely redone, mapping too.
- New wheels with new textures, new tires.
- 3 brake lamps, fog lamps, rear fog lamp.
This truck is designed for trails and exploration, it's a bit big for crawling courses. I took Aperion's BajaRenault (Based on Pricorde's terrain editor) and swapped the front suspension to a solid axle. The suspension is pretty soft, it is not meant for racing, although this suspension performs well for Baja driving, if you can keep it on its wheels...
Added flippers.
New rear cage with an exo cage for the cab.
Lowered gear ratios but still a high top gear for cruising/jumping.
Changed the exhaust point.
Shortened a bit in the rear.
If you have the original BajaRenault, you need to remove it before installing this truck to prevent a conflict. This file also DOES NOT contain the wheel textures, RoR already has them. The beam color you see in the picture is from me modifying the the "Rustysteel.jpg" in the trucks folder, the beams will appear normal for you...
Please ask me before uploading a modified version and give credit where credit's due (Pricorde, Aperion and me)...
A Skin and edit of the Jeep Cherokee.
It is a Toyota Land cruiser.
Rename the folder to Toyota_Landcruiser (If you want)
Thanks to Adeodat for making the Jeep Cherokee because if the jeep wasn't there then I wouldn't' have skinned the beautiful Toyota Land cruiser.
It has a bit of dirt on the side to make it a bit more realistic.
!!!Caution WILL conflict with The No_id_Jeep_Cherokee(Standard Jeep Cherokee)!!!
Simply remove the Jeep Cherokee file from the packs and add the Toyota Landcruiser
Its not so good at towing heavy loads like the RV trailer but it will tow it. (The back wheels slide a little)
I Have edited the following:
Weight: Made it heavier so now it wont flip as easy! (DON'T TURN SHARP ON THE ASPHALT AT HIGHT SPEEDS! IT WILL STILL FLIP EASY)
Suspension: I Have made it higher a little and made the wheels slightly bigger. Also the suspension is harder for better towing (you can soften it if you know how)
Gears:I Have made them shorter so the top speed is a bout 90 Km so you don't flip as easy!
Brakes:Made the brakes stronger.
Wheels: New wheel face and wheel band.
What happens when you merge a bus, a crawler, some 8 meter tall tires, and Cookie Monster?
Well... The Monster Crawler!
It is GIGANTIC. And it will go over just about anything. So far the fastest that I have completed the Aspen rock course with it is right around 45 seconds. In the Small Island map it simply rumbles over the hills like speed bumps.
It also has some very long ties that extend down from the middle of the chassis that can pick up small, light vehicles, like the Turtle. So you can take two crawlers along or a backup car to take you back to the garage. Its just a lot of fun, and a blast to drive in multiplayer with friends.
Controls: Press the "o" key to activate the ropes. Press the "n" key to turn on the "RAMPAGE ENGAGED" warning light and give the "cookie monster" bloodshot eyes.
To install, place the zip file in your packs folder. The vehicle will appear under the "Crawlers" category.
Due to the large tires, a lot of clutch overloading will occur. I have found the vehicle makes the best power at full RPM in 6-8th gear.
Credits go to Pricorde for the bus cabin structure. I resubmshed it, created the texture, and added the 3-link suspension system.
This is not my work, all credit goes to the originial author of this truck and Box5 for the lift and new look (textures) all I take credit for is repacking this truck so you can drop it into your packs folder
This is not my work, all credit goes to the originial author of this truck and Box5 for the lift and new look (textures) all I take credit for is repacking this truck so you can drop it into your packs folder
Willys Jeep... Nothing fancy, just a fun little truck. Its realistic... as in bare-bones, stiff, springy suspension, 3 gears, and not much power. But its fun for off-roading, even though it is a small vehicle. Enjoy! Don't tell me that the brake lights on the rear don't work... it didn't have any, just reflectors .