Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
added the following
5th wheel version with ball mesh courtesy of Diesel Smoke
light bar with working flares on all versions. CTRL-1 for flashing lights on light bar.
beacon on each version
light bar is from the repo thanks to dodge0359a
improved power,braking and hauling abilities.
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
Scania R560 6x2 "Tuning" semi and rigid tractors. Modded from 4x2 Scania R480 semi, originally made by Lenni.
"Enough" power, chrome and lights
Lenni: 4x2 base version and new UID (big thanks !!)
Korppi (Kuru): Editing the N/B and physics, frame mesh, basic bullbar mesh, airhorns, brights, sunvisor, front rims, lightsign, material flares etc...
Nexmartin: Roofbar, bumperbar and bumperguards, editing the basic bullbar, tons of great ideas
Lokinor566: Flares placing
Denkan: Many great ideas, beta testing
The skin is mainly made by Korppi, small fixes by Denkan and Nexmartin
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
Kenworth trial truck based around a w900. The pack contains two options- regular and FPS. Features open, split and locked diff options. Low gearings for offroading and crawling. The regular version also has flexmesh tyres.
Thanks to Box5 for the original meshes and chassis.
This pack has four custom Kenworth T600's. They started as a joke but I got carried away. There is probably a lot of bugs and stuff I haven't found but I just wanted to get them finished.
Most of the trucks are completely impractical. The wheel base is too long to have a tight turning circle. They sit so low you'll rip your bumper off the instant you hit a gutter. The lowriders with hydraulics have the worst ride imaginable and are stiff as a rock. The only purpose they really serve is to look cool.
'L' to lock on a trailer
'N' for lights
'Ctrl+1' for headlights
'F4/F3' to raise and lower the hood
For trucks 2 and 3:
'F5/F6' for front hydros
'F7/F8' for rear hydros
Feel free to mod these or do your own bug-fixin' however you see fit.
This is the Mercedes Benz Actros 8x8 pack.
This package includes 8 versions:
- version with no upper part
- cartransporter (+trailer)
- log truck (+trailer NEW!)
- box-truck(+trailer NEW!)
- flatbed (+trailer NEW!)
this is a project i will most probably never Finnish as i started something else instead.
its the 4x4 thing and a custom made crane trailer for it,
the 4x4 thing has 4 wheel steering at low speeds, locked diffs and a steering wheel.
the crane trailer has ropes and a invisible leg, the commands for it are are:
F9-F10 lower and lift the crane boom.
F11-F12 lower lift the invisible foot.
'O' connect load
'L' lock crane trailer to vehicle.
to connect the trailer drive the 4x4thing so the trailers hitch node is above the grease mark on the 4x4 thing and it 'L'
to pick up a load back the crane trailer over it lower it so its with in 1.5m from the object and it 'O' once it connects
and the ropes shorten hit F10 to lift the load of the ground and drive away. reverse order for dropping a load.
the crane trailer is usable on other 5th wheel hitches.
Hi there, this a 1984 Kenworth SAR designed and built only in Australia. It has a big 'n' burly Cummins inline 6, backed by an Eaton Fuller transmission with 12 forward gears to get the power where it's needed.
If you have the old version make sure to delete it from your packs folder
NOTE: This is an extensively modified version of Box5diesel's W900. I give massive thanks to him for the original truck and for allowing me to modify it.
There are several different trucks in the pack, however, to save space they all share the same mesh so you can only spawn one of each type at a time, otherwise the materials will collide.
I included the photoshop file in the pack as well, so it easier to make custom skins.
If you find any problems feel free to send me a private message.
This is a 1976 Ford W-9000 cab-over-engine semi tractor. A fairly basic node-beam vehicle that will get the job done. All of the pieces for this were created by me (M-138) except the mirrors. Feel free to modify, just remember to give credit.
After a LONG time working on and off I bring you this:
DAF XF105 8x4 Hauling Truck Original truck by Questnl
You may have seen previous iterations of this truck on this site before, but none as extensive as this.
Here is what I have done: -------------------------------
() Completely redid cab texture, from scratch
() New HD Wheel Texture
() Added Traction Control
() Increased power, & braking
() Added Anti-Lock-Brakes
() Added slope brake
() Using Wheels2, with user controlled tire pressure ingame
() Decreased Weight (more realistic now)
() Sharpened up steering
() Updated suspension
() Updated Help.png
() Updated preview picture
() Fixed translucent metal mesh
() Added Beacons
() Updated ability to raise/lower extra wheels
() Added user controlled lights (see ingame help on your dash)
() Added rear flares:
So alot has been updated in this pack, the skin is totally new, the tires are new, the lights are sharper and brighter. A re-bored engine giving 3000 revs more capable of pulling very heavy loads, especially with a new 18 gear transmission. it features abs, tcs, slope brake all custom tuned to fit the trucks.
Box5diesel very kindly has had the trucks to test and they are of his liking. here is a quote.
Yea I think you could post that up, you did some good work on it. I wish all vehicles used slopebrake by default, I love parking on hills and not worrying about it rolling away slowly.
Post it in the mods&skins section of the showroom.
Thank you box5diesel for testing it and glad you like it.
was a problem with previous versions, but now is all fixed
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
ALT + L will release the hooks from the boom when they are secured.
The boom is rated for 50 tons retracted and about 15 tons fully extended with boom mostly down (which is almost spot on with the real truck)
The under reach is rated for about 40 tons although I'm sure it may handle more.
This truck took a lot of hard work from my "team" and we are all very pleased with how it turned out, I hope you enjoy it as much as we do.
Please DO NOT MODIFY truck without asking me for permission
A generic european style foodstuff tanker trailer.
Be careful when driving, it behaves like a partly filled trailer and tips over easiely!
It can be modified if the modified file is really independent, if you want to make a skin only you should use .skin files or release the texture file only.
If you need help with making an independent mod please contact me.
Give credits when modifying or using parts of this trailer!
okay, this is a fix (with permission) for hemiboys kenworth SAR.. this will fix the problem with the rear axles. enjoy (first upload) these are the .truck files so all you need to do is replace them! (read me included if needed)
These are two of my favorite trucks, 1975 Chevrolet Titan 90 and GMC Astro 95.
The Astro 95 and the Titan 90 both have a Detroit 8v-71 318.
updated again with Sounds, The Titan is now longer in the GN Empire Builder Scheme
She's painted like my Titan model. Big Sky Blue and White with Black and gold stripes.
Now Without Visor, And Detroit 318 Straight pipe Sound Added.
Model - dneufeld
Wheels - Hemiboy
Adding the wheels - DougFunnie
Skins and tuning - MADDRIX
Sounds - MADDRIX - NRS91
Authors: sirendude 2011 and various members for support.
This is a pack of all of the vehicles I have made in the past 4 months. All of the cars are N/B only, don't have submesh, and some have no engine tuning.
none of these vehicles float, and one car (siren's auto 12x12 special) has all wheel drive, all wheel steer, working reverse lights, headlights, brakelights, and turn signals (flares). Some vehicles have opening hoods and doors.
Vehicles in this pack:
a 6x6 pickup truck called "mud slinger" (includes a Monster Truck version)
a 4x4 pickup truck simply called "pickup truck"
a few muscle cars/ sportscars (they are "highway terror", "lancia delta N/B Car", "tire burner", and "muscle car")
a school bus
a few offroaders ( they are "rock locker", "redneckrickem's dune buggy" (a YouTuber's buggy), "traxxurator"+"traxxurator dump" and "4x4 offroader")
a motorcycle (it has training wheels for stability :P)
and an engine that uses negative shocks to run, just give it a spin with the mouse and it runs. (be careful it explodes after a certain RPM)
You have the freedom to do whatever you want to these vehicles, but give me credits for the vehicle's N/B.
To open a hood or door, press F1 - F4. These commands do different things like open and close a door or hood.
Scania R 420 and R 480 Topline trucks, two different skins included.
Updated, doesn't use sections anymore.
Installation as usual, put the file in mydocuments/RigsofRods/packs.
If you have the older version then please remove it (this doesn't automatically overwrite!)
Works only in 0.36 and above.
All mesh and node and beam parts of the model are made by me, credits to pedro for the steering wheel texture.
If you want to reskin it make sure it doesn't conflict with my original pack in any way and contact me on the forums before you release any derivates of that model.
Only use one version of the truck at a time, more might crash the game.
I am not responsible if you mess up your RoR by installing or using this truck in a wrong way.
This is my Mack terrapro's beta. I have included both a two and four door version. I CREATED THE MESHES, I mounted them on Pricordes dafs because I liked them and I wanted to freshen them up. I hereby give full permission to use these meshes in any of your projects, all I ask is my name be mentioned. Both of them are skinable to an extent and are extremely low poly. More versions are in process and will be released some time in the future.
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Marco- skulls on skins
This is a Peterbilt 359, they both have bags so u can drop it low. Pretty good driving and thanks trevor for this great but old semi. By the way this is my first repo and i hope its good
authors: trevor and me for mods
This is an American Pride skin I made for the Kenworth T600.
Credits for the truck go to: HemiBoy95
This replaces the first truck, just download skin, go into the T600 folder find and remove the T600body_1.dds and also T600body_1_s.dds and make a copy of them, then just simply place the new skin into the folder and play..Have Fun! (sorry for no picture, this is my first upload, and im trying to figure out how to get a screen shot)
This is a Peterbilt Cabover with a halftrack system. You can tow trailers with it, I had 60tons on it so far with no trouble. This is my first vehicle built entirely by me, its not fast or perfect but it works have fun it and please dont mod with out my permission
This is my mod to BigBoy and 95blackz27's Kenworth T800.
Things I added/remade:
I chopped the stacks.
Fixed to hydraulics in the back (red/green)
Made the truck shinier.
Change the color then changed it back.
Added a weight to the Tri-Axle Longframe Daycab (.truck file #1)
Added then got rid of a bull bar from the Kenworth SAR.
Added then got rid of custom mudflaps made by me.
Added color to the door handle.
Authors: BigBoy (Original Truck); 95blackz27 (Added Traction Control, Shined Driveshaft) HemiBoy95 (Aolcao Wheels) CarBoy (Weight and N/B for Weight) Scania_Lover (This mod of it)
At long last, my very first proper vehicle pack for RoR!!! In this pack are a Kenworth k100 and a Peterbilt 379! They are basic node/beam structures and behave realistically and are tuned niceley to haul/pull a heavy load at high speed. They both ride VERY nice because they both have air ride cabs. The Pete has rear tandem bogie suspension (if you don't know what that is look it up on google) and the Kenworth has rear air ride suspension. They also have Cummins 6BT sounds by zikemester96 and they were edited and fitted by me. Enjoy these great trucks and if you want to release mods of these trucks, remember to credit me and zikemester96!
-Peterbilt and Kenworth: 12444 (me)