A proper control map configuration for the DFGT provides full 900 Degree steering.
How to install
1- After backing up original Input.map (or renaming to Input.map.old) place this input.map in your documentsRigs of Rods 0.38config directory. -Note: you will find the original there too
2- Import the RoR profile (Rigs of Rods.xml) to your Logitech Gaming Software (Under "Properties" select "Import" and browse for the xml to where you extracted it.
-Note: In order for 900 degrees to work properly run Logitech Gaming Software as Administrator (This will help other games too) if you don't like like 900 degrees then i suggest you still use the profile just use the software to edit it.
Also: Force Feedback works best with the configuration set to Overall 100%, Steering Force Feedback 400%, and rest 0% (These options can be found in the RoRConfig Under Controls, Force Feedback)
Controls:
>X=Headlights
>Circle= T -Keystroke (Physics Engine Analyses Overlay)
>Square=Differential
>Triangle=Toggle View
>R1/Shifter(+)=Shift Up
>L1/Shifter(-)=Shift Down
>L2(<)/(>)R2=Signals
>R3=Warning
>L3=IDK
>Horn=Horn
>PS Button=Ignition
>Select=Parking Brake
>Start=Contact
>GT5 Dial Enter Button=Backspace Function
>GT5 Dial Left(+)/Right(-)= Field of View Adjustment
Edit> Keyboard Controls Unmodified other then: R=Replay J=Rescue (Reversed)
This is my input.map for the Gravis Gamepad Pro. It's a simple controller, but all the basics are added. There are only 2 common buttons; entering /exiting vehicle and repair vehicle(backspace). It is setup for automatic shift.
Have fun and if you find any bugs let me know. (you shouldn't seeing how it's such a simple controller.)
Simply replace the old "input" file with this one.
It will be located in Libraries>documents>Rigs of Rods 0.38>Config
Finally open rorconfig and disable forced feedback.
For those of you who may need guidance with motioninjoy setup, here ya go!
There has been a problem with ror crashing upon entering a vehicle. If you have this problem please disable your forced feedback in the rorconfig.
Please be aware that this key map is for people who wish to use their Playstation 3 controllers by utilizing the MotioninJoy software. It is also designed to be used with the default "PS3" profile setting within MotioninJoy.
UPDATE 1.1: This is the revised controller for auto and manual transmissions. Camera issues were also resolved in which the camera rotated a different speed than the character.
UPDATE 1.2: Minor adjustment to camera control button configuration.
UPDATE 1.21: Clutch for manual transmission added into the controller description(No download necessary).
Note: If anyone can and would like to help, I am having trouble finding a way to remove the artificial steering centering. This causes the steering wheel to return slowly, which may work for keyboard users, but makes joystick steering very difficult at high speeds. Please don't hesitate to PM me and any suggestions would be greatly appreciated.
Basic Controls
Throttle/Brake..............R2/L2
Up/down shift...............R1/L1
Steer..........................Left Joystick
auto up/down shift.......Directional pad up/down
Rotate camera.............Directional pad left/right(in vehicle)
..................................Right Joystick(on foot)
Change camera view....Select
Reset Camera..............R3(press right joystick)
Start Vehicle................Start
Horn...........................L3(press left joystick)
Enter/Exit Vehicle..........Triangle
Parking Brake...............Circle
Toggle Axle Lock...........Cross
Clutch..........................Square(full manual trans)
Guys please consult with me before placing blame. I provide support to people who need help getting this working correctly. Responses in the comments such as "sort it out" when YOU'RE the 1 making installation mistakes or having problems makes me not want to help you.
Hello! This is my first input.map I do and it's for my Serioux gamepad. It's a VERY simple input map with 2 buttons and 2 axis. Enjoy!
P.S.: This input.map works with most of the gamepads.
This is the input map for using smartphones (android only) like a sterring wheel or pad for GRemote.apk
Program using wifi to connect with smarphone.
A - Accelerate
B - Brakes
GSensor - Sterring wheel
Arrow right - parking brake
You can also change it in input map config.
; TRUCK
TRUCK_ACCELERATE JoystickButton 0 0
TRUCK_BRAKE JoystickButton 0 1
TRUCK_STEER_LEFT JoystickAxis 0 0 LOWER
TRUCK_STEER_RIGHT JoystickAxis 0 0 UPPER
TRUCK_STARTER JoystickButton 0 6
TRUCK_PARKING_BRAKE JoystickButton 0 4
Here is my version of the Logitech G27 input file. Even has low, mid, and high gear range for driving big trucks and cars with more than 6 gears.
Help document is included if you need help and pictures so you can see what button does which function.
I believe it is compatible with the Logitech G25 wheel, but might have to modify it to get all the functions to work right.
Input map for the Thrustmaster RGT Force Feedback Clutch Racing Wheel
You have a Thrustmaster RGT Racing wheel and want to use it in ROR? Then use this input.map!
To see all the commands, have a look at the pictures.
Note: I haven't described how to steer and to use the pedals, I think you already know this if you play a game like Rigs of Rods.
Also make sure you have configured your steering wheel right, to check this, open your Thrustmaster control panel and compare your setting with the ones I have added in a screenshot.
Installation instructions
- Extract the .zip file to your desktop
- copy the file input.map to Documents/Rigs of Rods/config
- Play ROR and have fun :-P
Remember to change your gearbox settings for ROR to Fully Manual: sequential shift
Hey RoR people, this is a keymap I made for the Logitech MOMO Racing Wheel
Instructions:
1. Go to your Documents
2. Go to your Rigs of Rods folder
3. Open the config folder
4. Back up the input.map file
5. Place the input.map file from the .zip file you downloaded into the config folder
6. Launch RoR
7. HAVE FUN!
Also, if you have ANY problems whatsoever, feel free to PM me.
This is a very comprehensive mapping of the ror controls to the PS3 controller. I have spent a lot of time on this and it should work with the latest version. See the included picture, for the actual controls.
*to enable your ps3 controller to work with ror and your computer, follow a dodgy tutorial at your own risk!*
This is a ROR keymap for the Logitech Driving Force Pro and Driving Force GT . This keymap is for combined pedals OFF. You can do it with Logi Profiler/Options/Global Device Settings/Report Combined Pedals
For blinkers and other options, you must use the Logi Profiler and record button by keystrokes (like POV)
Installation: ROR 0.38
1. Download the ZIP, and extract input.map to My Documents/Rigs of Rods 38/config
2. (DFP for blinkers) Extract Rigs Of Rods.xml to ROR directory an load this file by Logitech Profiler
Logitech Profiler / Profile / Import next step Select profile / choose Rigs of Rods
How to install:
1) Back up your current input.map file if necessary.
2) Extract input.map to My Documents/Rigs of Rods 0.38/config
or My Documents/Rigs of Rods/config (0.36 - 0.37).
Note:
The controls should be compatible with model numbers: G-UD8, G-UF13, G-UF13A, G-U0001, G-U0002, C-U0003 and G-R0001. Please correct me if I'm wrong (I only own 2 Dual Action gamepads).
Airplane:
Brake: Button 3, B
Elevator down: Left joystick y-axis back (down)
Elevator up: Left joystick y-axis forward (up)
Flaps less: Button 1, X
Flaps more: Button 2, A
Rudder left: Button 7, LT
Rudder right: Button 8, RT
Steer Left: Left joystick x-axis left
Steer Right: Left joystick x-axis right
Throttle down: Right joystick y-axis back (down)
Throttle up: Right joystick y-axis forward (up)
Toggle engines : Button 6, RB
Boat:
Center rudder: Left joystick y-axis forward (up)
Reverse: Left joystick y-axis back (down)
Steer Left: Left joystick x-axis left
Steer right: Left joystick x-axis right
Throttle down: Right joystick y-axis back (down)
Throttle up: Right joystick y-axis forward (up)
Camera:
Change: Button 9, Back
Lookback: D-pad down
Reset: D-pad up
Zoom in: D-pad right
Zoom out: D-pad left
Character:
Backwards: Left joystick y-axis back (down)
Forward: Left joystick y-axis forward (up)
Jump: Button 1, X
Left: Left joystick x-axis left
Right: Left joystick x-axis right
Run: Button 2, A
Common:
Enter or exit: Button 4, Y
Toggle Stats: Button 10, Start
Toggle Beacons: Right joystick x-axis left
Toggle Lights: Right joystick button
Info: Button 10, Start
Map: Button 10, Start
Truck:
Accelerate: Right joystick y-axis forward (up)
Blink left: Button 5, LB
Blink right: Button 7, LT
Brake: Right joystick y-axis back (down)
Horn: Left joystick button
Light toggle 1: Right joystick x-axis left
Light toggle 2: Right joystick x-axis right
Parking brake: Button 3, B
Shift down: Button 8, RT
Shift up: Button 6, RB
Starter: Button 2, A
Steer left Left: joystick x-axis left
Steer right: Left joystick x-axis right
Toggle contact: Button 1, X
You need to open the .map and copy and paste it to the bottom of the input.map file.
In my documents / rigs of rods / config / input. Open it in notepad, copy and paste my or others xbox controller stuff onto the bottom of the file. Save.
For Microsoft Xbox 360 controllers only.
here is what button does what:
Common:
Right thumb stick: look around
Left thumb stick: move character
X: run
A: jump
Y: enter/exit vehicle
RB: change camera view
Truck:
Left thumb stick: steer
RT: accelerator
LT: brake
LB: shift to neutral
X: shift down
B: shift up
A: toggle battery contact
Start: starter motor
Back: Parking brake
D-pad up: head lights
D-pad left: left signal
D-pad right: right signal
D-pad down: beacons/police lights etc.
Left thumb stick button: horn
Airplane:
Left thumb stick: steering/elevators
X: throttle down
B: throttle up
RT: rudder right
LB: rudder left
A: reverse thrust
Boat:
Left thumb stick: steering
B: throttle lower
A: throttle higher
This is a keymap for the Logitech G25 or G27 wheel. It has everything set up for vehicle use, including the push-down reverse gear, the clutch+shifter and the ranges for trucks with more than 6 gears. You must set up the force-feedback yourself.
When first selecting a truck, you may need to push and release each pedal to make them work properly, sometimes they are on 50%. Also, you must have combined pedals OFF. You can do this in the Logitech profiler or via Game Controllers in Control Panel.
Ranges are the four black round buttons on the top of the shifter, the bottom one is for low range, the two middle ones are both for mid range and the top one is for high range. Your gearbox must be in "Fully Manual : Stick shift with ranges" for ranges to work. Your shifter also must be in N to switch ranges.
This MAY work with other Logitech wheels but it's untested and I offer absolutely no promises.
DISCLAIMER : This will not use any controls you currently have set. This is an entirely different button/axis configuration.
INSTALLATION :
0.37 / 0.38.12 and earlier :
1 : Download the ZIP, and extract it to My Documents/Rigs of Rods/config
2 : Open the RoR Configurator, go to Controls, Bindings, and Import Keymap. Browse to My Documents/Rigs of Rods/config and select the g27-g25.map.
3 : Save and Play!
0.38.13 and later, as long as the controls configurator is removed from the configurator :
WARNING : If you do not back up input.map, you will permanently lose all of your current set controls!
1 : Browse to My Documents/Rigs of Rods/config and back up input.map to your documents.
2 : Download the ZIP, and extract it and rename g25-g27.map to input.map
3 : Copy it to My Documents/Rigs of Rods/config and overwrite the current input.map
4 : Play RoR!
When the controls configurator is back, just follow the steps for 0.37 / 0.38.12 and earlier.
0.37 / 0.38.12 and earlier :
1 : Open the configurator, go to Controls, Bindings and Import Keymap.
2 : Browse to My Documents/Rigs of Rods/config and select input.map
3 : Save and Play!
0.38.13 and later, as long as the controls configurator is removed from the configurator :
1 : Copy input.map from where you backed it up (didn't? too bad, you were warned) and copy it to My Documents/Rigs of Rods/config and overwrite the current input.map
2 : Play RoR!
When the controls configurator is back, just follow the steps for 0.37 / 0.38.12 and earlier.
Here is a config file for the Microsoft® Sidewinder USB steeringwheel.
I have made this config because some people have problems with setting axes.
You can simply add him in the configurator.
How to install:
1) Open the configurator
2) Click on "controls"
3) Click on "import keymap"
4) Select the .map file (unzip the archive first)
Now you have a fully working Microsoft® steeringwheel
UPDATE 0.38.XXX
1) Extract the .map file out of the .zip
2) Go to your documents folder and go to the "Rigs of Rods 0.38" folder.
3) Then click on "config" and replace the .map with the one out of my .zip (backup first)
DFGTInput.zip
view details
Gold
Silver
Bronze
