Browsing tag Cranes, found 67 matching files. (14 pages)
Download all 67 files: Cranes.zip (about 198.01 MB)
(updated on 9/8/13)
DarthCain : tires. images, blueprints, support
DJ|Jasper : tunning, flares for rollback, mini images, engine tunning
Jerald9000 : sounds
negativeice : everything else
there are 7 trucks in all
empty frame long
empty frame medium
you can mod the empty frames and put whatever you want on them, although you might have to edit the frame length and frame mesh.
you can mod the trucks but not release without my permission.
f5-f6 : rotate crane
f7-f8 : raise/lower main boom
f9-f10 : raise/lower second boom
f11-f2 : extend/retract boom sections
ctrl-f1-f4 : extend/retract legs
ctrl-f5-f8 : extend/retract stabilizers
f5-f6 : raise/lower deck
f7-f8 : slide deck in/out
f9-f10 : winch
f11-f12 : underlift up/down
ctrl-f1-f2 : underlift slide in/out
tilt hood for all trucks
top cab light
big thanks to my beta testers for all there help
if you are adding something to the empty frames, it must be skinnable.
all mods must be approved by me before a release.
23 Comments, add comments here.
this 2 Kone overhead crane have 2x15tcats
-colision between the bridges and cats
-Before using the crane ,shift the gear box to MANUAL SHIFT AUTO CLUTCH with Q and shift the gearbox to 0 with
-2 cats at each bridge can control with the same commands, can be on/ off (alt f1/f2)
-the hooks have autolock nodes ,can be on/ off (ctr f1/f2 bridg1 - ctrf3/f4 bridge2)
-press T for it see the commands in ror
f1/f2 bridge2 rear/front
f3/f4 bridge1 rear/front
f5/f6 catB-bridge2 left/right (+ctr catA)
f7/f8 catB-bridge1 left/right (+ctr catA)
f9/10 catB -bridge2hook up/down (+ctr catA)
f11/12 catB -bridge2hook up/down (+ctr catA)
One Comment, add comments here.
(updated on 28/7/13)
Volvo with Knucklecrane effer 2655 version 2.3 (final version probably)
Tested in ror 0.38.67 - 0.4.0.7
DELETE THE OLD VERSION !!!
This file contains:
-truckcrane effer 2655
-manualboom for jib-s6
-winch for jib-s6
-hook for crane effer 2655
-heavy winch for crane self
1-heavy jib-s6 stronger
1- left/right legs up/down parted: ctr+f9/f10 left legs up/down and turning all cylinders
- ctr+f11/f12 right legs up/down.
2 -shocks unlock press f4 (press alt L is no longer necessary ).
3 -jib-s3 weighs much less ,better useful for jib-s6(it also less strong but strong enough for - 1000kg /booms out -350 kg).
1-added -heavy winch for the crane self.
2-auto instalation winch cable.
3-winch cable visual better.
4-shocks for the crane self.
1-First press alt L (or f4 in version 2.3 ) for unlock the shocks.
This shock care for load activation (other wise loads will not move or damage )and for damping the crane.
2-Spawn and hooks the jibs on the crane what you need.
. Spawn- more than 10 m from the centre of the crane.
. Spawn-the jibs not to close them together , when it will wake it will hooks on the same time ,what destroying is as a result is
3-Move the hooks of both jibs(also the both winch hooks) to the centre off the crane .
4-Wait-for see 2 hook lines if you used 2 jibs(1hook line 1jib).
f1/f2 rotation crane
f3/f4 main boom up/down
f5/f6 second boom up/down
f7/f8 boom 1/2 in/out
f9/f10 boom 3/4 in/out
f11/12 boom 5/6/7 in/out
O hook a load
ctr+f1/f2 legs left unfold
ctr+f3/f4 legs right unfold
ctr+f5/f6 legs left in/ out
ctr+f7/f8 legs right in/out
ctr+f9/f10 legs up/down
Use [shift] instead of [alt] in ror 0.4.0.7
alt+f5/f6 rear legs cylinders do not turning more (not important ,in real these cylinders are in most of time down.)
alt+ f9/f10 lift 5th as (for more traction)
alt+f1/f2 jibs6 up/down
alt+f3/f4 jibs6 booms in/out (use RIGHT alt ,LEFT alt the game will close)
alt+f5/f6 jibs3 up/down
alt+f7/f8 jibs3 booms in/out
MANUALBOOM FOR JIB-S6
alt+f5/f6 manual boom in/out
WINCH FOR JIB-S6
alt+f11/12 winchhook up/down
alt+f11/f12 winchhook up/down
22 Comments, add comments here.
Liebherr 13HM mobile fast-erecting crane
All content is for use in Rigs of Rods only!
Use RoR 0.38.67+ for this!
- Detailed meshes
- Accurate kinematics
- Realistic lifting capacity (refer to the board on the crane!)
Start the engine and put the Crane in NEUTRAL!
- F1/F2: Rotate
- F3/F4: Trolley (use throttle to speed up if needed)
- F5/F6: Hook Up/Down (use throttle to speed up if needed)
- F7/F8: Extend/Retract Jib
- F9/F10: Raised-jib working angle
- Ctrl+F1/F2: Assemble/Disassemble
- Ctrl+F3/F4: Outriggers
- Ctrl+F5/F6: Legs
- Ctrl+F7/F8: Trailer wheel up/down
- Ctrl+F9/F10: Turn trailer wheel
- And as usual lock loads with "o"
You can also see the commands by pressing "T" ingame.
Basical procedure: Ctrl+F4 to fold outriggers; Ctrl+F6 once for legs, Ctrl+1 [NOT F1!] to display the baseplates, Ctrl+F6 again for legs. Then Ctrl+F2 to erect the crane automatically. Jib control is on F7/F8. Jib angle is on F9/F10. Retract automatically on Ctrl+F1.
- sputnik_1: meshes, node and beam, sounds, textures
- BigBoy, Craneman, Lifter, Inviteds, Donators: testing and help, thanks a lot!
13 Comments, add comments here.