|
|
Browsing tag Box body, found 39 matching files. (2 pages)
Download all 39 files: Box body.zip (about 95.81 MB)
|
(updated 1 day, 8 hours ago)
|
This is something that I've been meaning to make for quite a while, a revamped version of my first scratch-made creation for RoR.
Features:
Fully meshed
Working suspension parts
Working lights, courtesy of the materialflares system
Opening ramp (Ctrl+F3/F4)
Working jack, to make trucks of most heights haul this (Ctrl+F1/F2)
Lots o' ties to keep the most unruly load secure (ropables not included and must be present on the vehicle you are securing)
Plenty of room for even the biggest of your toys (10ft wide x 11ft tall, and 20ft long. It also comes in a 26ft long version)
Credits:
DODGE charger (Me) - Everything
Off-Roader, Excisionized, and ShawnVallance - Beta Testing (A big thanks to them)
You are free to make skins and release them as you please using the skinzip system. (.PDN for skinning/.PSD for skinning)
Update 1!
Added moving jack
Fixed gap issues with the ramp
Made a basic colors skinpack (Includes Black, White, and Blue skins)
Made an official Dura-Built skinpack
Increased stability of trailer (Doesn't shake as easily)
Update 2!
Fixed more issues.
Update 3!
Fixed deadly ties
Made brakes brighter
Update 4! (Hopefully the last)
Made jack retract further
Discuss - Dura-Built-Defender-enclosed-car-trailer (Skinpacks are in the first post of this thread)
|
| |
|
|
 9 Comments, add comments here.
|
(updated on 31/3/13)
|
Map: La Paz.
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Credits
CGTextures (restrictions apply, see below)
tiredoldwhiteman
DieselPower24
khadner
bf449
flyer3849
JensLynIV
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Forum thread |
| |
| Average Rating: |  | Tags: | HighQuality, Tanker, Flatbed, Box body, Trailers, 6x4, Semi, Transportation, Heavy Machinery, Land Vehicles |
Downloads today: 21, all time: 9317 |
|
|
20 Comments, add comments here.
|
|
|
This is a large pack of custom light trailers for just about anything small.
CONTROLS:
Box Trailers - Ctrl+ F1/F2 = Open/Close Door
Cargo Trailer - Ctrl + F1/F2 = Lift/Lower Lid
TRAILER LIST:
Alpha Trailer "Basic" Factory
Flatbed Trailer "Basic" Factory
Flatbed Trailer "Extended" Factory
Flatbed Trailer "Lifted" Factory
Flatbed Trailer "Custom" Junker
Tandem Axle Trailer "Basic" Factory
Box Trailer "Basic" Factory
Box Trailer "Custom" Factory
Box Trailer "Lifted" Factory
Box Trailer "Custom" Construction
Cargo Trailer "Custom" Factory
TO MODDERS:
If you wish to mod this, just ask, I'm fine with it if you ask and give credit.
Link to Discussion: Flat-Bed-Light-Trailer-(Becoming-a-Mega-Pack!)
|
| |
|
|
|
11 Comments, add comments here.
|
|
|
This IS A Mod This Version Has Wheels And A Custom Skin Black Mr.Plankthon For This. Mitcitylover ADDed Wheels And Custom Black!!!
WORKS FOR 38.67 NOT SURE ABOUT OTHER VERSIONS AGIN |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 1/8/12)
|
This is a mobile home or mobile office depends on how you use it. You can pull it to your location and pull the tires into the body and it will be on the ground like a house. It is a decent amount of weight 22046.23lbs. It is fun to pull around comments are greatly welcomed. This is a 10x40 trailer its not a CAMPER.
made by me
Update 1. made the tongue longer fixed the tires problems added more weight |
| |
|
|
|
10 Comments, add comments here.
|
|
|
This is a simple small bumper pull camper. It is my second camper i have made. This one is a little unsteady when going over 60. And the one with extra weight on the tires sways sometimes. I will continue to fix these problems though. The normal non weighted one does roll sometimes.
This is made by me |
| |
|
|
|
6 Comments, add comments here.
|
|
|
This is jerald9000's 53-foot Great Dane trailer, reskinned into the livery of my new trucking company, Dreamland Trucking. The blank area in the center of the sides of the trailers can be skinned to your liking. It should not overwrite the original trailer.
Original trailer: jerald9000
Reskin: burbdetdrive
Here's Dreamland Trucking's thread: Dreamland-Trucking-(WE-RE-HIRING!)
|
| |
|
|
|
No Comments yet. Add some here.
|
|
|
This is a simple 5th wheel camper. This is pretty well sized and is my first trailer. I hope you enjoy and comment if you like or if it isn't working.
Authors: my self
Btw the beams by the hitch are invisible now. |
| |
|
|
|
7 Comments, add comments here.
|
|
|
I made another skin as promised. 
it is a billboard of Starling Island,
you can put it behind the minibus. I would do more if you like them 
|
| |
|
|
|
One Comment, add comments here.
|
(updated on 12/4/12)
|
Hello, I released my second mod
it is a billboard in the colors of RoR, soon will come from other
skins. The credit goes to the author of the original billboard. |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
This is my 'ROR Dairy CO-OP' Skin for the Peterbilt 359 and Beverage Trailer by Trevor.
*All Credits to Trevor for the Original Peterbilt 359 and Beverage Trailer* |
| |
|
|
|
2 Comments, add comments here.
|
(updated on 17/7/12)
|
Here is the first US rolling stock, so you can finally tow some waggons with my ALP.
A loadable 40ft boxcar, comes in several liveries.
You can open the doors by grabbing the levers at the doors, the couplers can be locked/unlocked (both sides like on my ALP!) with the bigger lever at one end, on the other end there is a lever for the handbrake. Grab those with the mouse, you do not need to enter the waggons
Known bugs:
If you enter a boxcar through the vehicle selection menu game will crash if you try to exit the boxcar, simply change into another enterable vehicle via the menu and exit there.
Thanks to:
donoteat, maddrix for skins
sputnik_1 for helping me with adjusting the node/beam. |
| |
|
|
|
12 Comments, add comments here.
|
(updated on 29/3/12)
|
This is a Philadelphia Eagles skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 29/3/12)
|
This is a USAF skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 29/3/12)
|
This is a Walmart skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
One Comment, add comments here.
|
(updated on 29/3/12)
|
This is a Detroit Lions skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder |
| |
|
|
|
No Comments yet. Add some here.
|
(updated on 29/3/12)
|
This is a Cincinnati Bengals skin zip for the 53Foot greatdane made by Jerald9000.
To install this you need to at least have trailer. You must replace the files within the folder with the ones in the original trailer folder. |
| |
|
|
|
One Comment, add comments here.
|
(updated on 28/3/12)
|
Hello, I'm happy to introduce my first ever official mod to a trailer, It is a monster energy skin for the FEDEX 53ft Great Dane dryvan, Just throw it in packs, Because of the (1) at the end it will not overwrite, So enjoy, I hope it is a cool mod to you guys, It took about 3 hours to get it right... haha.
Credits:
Original trailer: Jerald9000
New skin: aarongary2011
Tell me if i forgot anybody!
Enjoy!
Link to further discussion and Show-off screens:
Monster-Energy-Dryvan
Feel free to post your screenies |
| |
|
|
|
No Comments yet. Add some here.
|
|
|
Here is an inclosed bumper pull car trailer I made. The dimensions are: 7.62m or 25ft long, 3m or 9.8ft wide, and 2.4m or 8ft tall. Also it includes a .psd and .pdn texture map to make you own
texture. controls: CTRL + f1 & f2 = landing gear, CTRL + f3 & f4 = ramp
Credits
DODGE charger (me) = everything
Joebus = help with submesh
Please get permission before you release a mod.
Here it is hope you enjoy!
Discuss Here: Inclosed Car Trailer [RELEASE] |
| |
|
|
|
9 Comments, add comments here.
|
|
|
The is Jerald9000 53 great dane trailer with a remade skin.
Credits to Jerald for making the trailer.
Credits to me (RKS DIABLO) for the reskin hope you enjoy |
| |
|
|
|
No Comments yet. Add some here.
|
|
DB_Defender.zip
view details
Gold
Silver
Bronze
