ALT + L will release the hooks from the boom when they are secured.
The boom is rated for 50 tons retracted and about 15 tons fully extended with boom mostly down (which is almost spot on with the real truck)
The under reach is rated for about 40 tons although I'm sure it may handle more.
This truck took a lot of hard work from my "team" and we are all very pleased with how it turned out, I hope you enjoy it as much as we do.
Please DO NOT MODIFY truck without asking me for permission
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
You can lower and lift the supports with F1/F2
You can lower and lift the Dumper with F3/F4
As long as you give me credits, you re allowed do verything you like to and that makes the trucks better.
Using parts of my trucks for your own project surely also allowed, only let the people know who has done the originals.
It was nice to get an PM if you plan to publish it on other sites than these.
This is my first major project i have full permission from negative ice and voulk.
This is my International 4400 pumper
It's based off a few different versions iv seen on the internet
it is now separate from the main zip so you may want to delete the one in the zip as it may conflict
and everyone else who contributed to this project.
new pump mesh
This is an skin for Lenni's Man TGS 32.350 LTF 1060 Crane Truck.
I've skinned it to an "Feuerwehr Kran" With the marking 'KW-065'
This is an fictional skin loosely based off real german fire apparatus. [read more]
Included in the pack is:
- Manitou telehandler with coupling for attachment
- Manitou telehandler with truss boom
- Manitou telehandler with winch
- Bucket attachment
- Forklift attachment
- Counterweight loads
- Skin selection menu removed (download skin pack instead - see forum link)
- New torque curve
- Flares added
- Working lights/beacon added (Ctrl-1)
- New Manitou winch version
- 2 Counterweight loads
These are my Winnebago's I have been working on for a couple of months. Instead of basing them on a particular year, I just used the styling cues of the early 70's. More or less if these were real I would call them licensed reproductions(Though not really Licensed). Yes, they are made in sketch... But I feel that it is one of my best mods ever. Please keep the sketch comments to your self, I would really appreciate it. Now on to the credits...
Me= The main mesh's/converting/optimizing
Google= the sink in the large Winne
Arthur Hucksack/Creak and me= The chassis
csxgp38-2 Schoolbus version
Now on to business
1. You are allowed to mod these vehicles to any extent, even the mesh
2. You are allowed to upload mods of this vehicle here or any other RoR related site.
3. You are legally aloud to have fun and post pictures to you're hearts content.
Features on this bus:
- New skin
- New flares
- Custom beacon
- Mesh wheels
- Working wheelchair lift (Not perfect but very good)
- New sounds
- Mesh seats
- Rear LED taillights and turn signals.
- Daytime running lights
- Bright lights
- strobing headlights
- 2 working stop signs
- Light check system
- Custom mirrors
- Front Engine normal size Lake County school bus
- Front Engine normal size Wisconsin school bus
- Front Engine short school bus
- Rear Engine Department of Corrections bus
- Rear Engine normal size Jefferson county, Kentucky school bus
- Rear Engine normal size Wake County, North Carolina school bus
2008 KME Predator fire engine, based on the fire engine from Butler NJ.
- Openable doors and windows
- Tilting cab
- Animated props; driveshafts, light switches, pedals, dashboard needles...
- Can simulate engine torque twisting force (RoR first)
- Comes in 2 versions; caterpillar and detroit, both equiped with allison 5 speed auto transmission
- 22 commands (F1 to Ctrl+F12)
- 9 custom lights (Ctrl+1 to 9)
-Default light bar flares showing on the roof when "M" was pressed
-Broken turn signal
-Mirrors are back again
-Added Eminox's engine/gear ratio & driving aids
-Now accept .skinzip files
-Detroit and Caterpillar version are combined into the same .truck file, use the in-game menu to make your choice.
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin [read more]
-front legs cylinders are stronger
-front tires are stronger
-visuale bugs of hinge points fixed
-change what of color
-legs visual better
-added jib version
hook A pallet press ALT-f12 ,unhook the pallet press ALT-f11
For the first start the hook is on ,so you have nothing to do.
You can pickup the palletlifter with press h (this crane has an hook-node in the hook) or O just for other cranes.
Drive the truck under the box ,it will automatic hook the box .
Press CTR+ALT f1 for legs in .
For unhook the box press ALT+L
alt+ f1/f2 legs left in/out
alt+ f3/f4 legs right in/out (use right alt ,left the game will close)
alt+ f5/f6 legs left in/down
alt+ f7/f8 legs right up/down
alt+ f9/10 leg front up/down
ctr+alt f1/f2 legs loadingbox up/down
ctr+ f1/f2 boom1 in/out
ctr+ f3/f4 boom2 in/out
ctr+ f5/f6 boom3 in/out
ctr+ f7/f8 boom4 in/out
ctr+ f9/f10 boom5 in/out
ctr+ f11/f12 boom6/7/8 in/out
f9/f10 jib booms in/out
f11/f12 manual jib booms in/out (works only when the hook is not loaded)
L hook /unhook trailerhook or cranehook
alt+ F11/F12 unhook/hook palletlifter
All functions work by press once functionality, also winches, so when you press the extend button once, the winch will keep extending, until you press again.
F5-F6 Front Winch
F7-F8 Rear Winch
F11-F12 Drop sides
W Diff Lockers (Open, Rear Locked, Both Locked)
N Driving lights
3D models, textures, N/B, truck -file and custom sounds are
A shader script and a material script are by Box5Diesel.
Core beta testers and useful help: Braskus, Gabester, and many other forum members.
Thanks to all beta testers and to everyone else who helped me at the
Welcome to my Dieselpunk road train pack. Included are a locomotive (6 versions), 4 passenger consists, 3 freight consists, and a shunter. These can more or less be mixed and matched as you please. Enjoy!
The rear view camera can be zoomed in and out by pressing ctrl+1. Adjust the height of the trailer drawbars with F1 and F2. Set the transmission to full auto when in a locomotive (not necessary in the shunter). The trailers can be entered and have a Ringfeder coupling at the rear for daisy chaining (careful, the brakes on subsequent trailers will not work).
12x12x12 highway locomotive. 16-cylinder turbosupercharged diesel engine, diesel-electric transmission. Traction motors and steering on all axles.
Length 48 ft, weight 120,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
12x12x12x2 highway locomotive, with 1 booster. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 95 ft, weight 240,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
12x12x12x3 highway locomotive, with 2 boosters. 16-cylinder turbosupercharged diesel engines, diesel-electric transmissions. Traction motors and steering on all axles.
Length 142 ft, weight 360,000 lbs. Maximum service speed 100 MPH (passenger) or 60 MPH (freight).
Relax in airplane-style seats with generous legroom in coaches 1 and 2, enjoy the view from the rear observation lounge, or get some refreshments or a light meal in the bar.
3 cars. Length 212 ft, weight 160,000 lbs. Maximum service speed 125 MPH.
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, enjoy the view from the rear observation lounge, or have a drink or light meal in the bar.
5 cars. Length 336 ft, weight 240,000 lbs. Maximum service speed 125 MPH.
Choose between airplane-style seating in coaches 1 and 2 or table groups in coaches 3 and 4, marvel at the view from the rear observation lounge, visit the bar for drinks and snacks, or enjoy a delicious 3-course meal in the dining car.
7 cars. Length 461 ft, weight 320,000 lbs. Maximum service speed 125 MPH.
The choice is yours between single or 2-abreast airplane-style seats in coaches 1 and 2, 1+1 and 2+2 table groups in coaches 3 and 4, or 3+3 compartments in coaches 5 and 6 - legroom is generous throughout. Watch the latest newsreels in the theatre, visit the library for a vast selection of national and international newspapers, magazines, and books, and arrange meetings or send telegrams on the move in the conference room. The rear lounge offers a spectacular view of the landscape through panoramic windows, and the adjacent bar offers all manner of drinks, snacks, or even light meals. For a truly gourmet experience, the world-class kitchen on wheels offers exquisite 3-course meals in the dining car.
10 cars. Length 648 ft, weight 440,000 lbs. Maximum service speed 125 MPH.
Freight Consist 1
Expedited freight. Reefers and mail vans.
9 cars. Length 400 ft, weight 400,000 lbs. Maximum service speed 75 MPH.
Freight Consist 2
Hazardous goods. Chemical and fuel tankers.
10 cars. Length 387 ft, weight 440,000 lbs. Maximum service speed 75 MPH.
Freight Consist 3
Bulk freight. Timber trailers and coal hoppers.
8 cars. Length 296 ft, weight 440,000 lbs. Maximum service speed 75 MPH.
Made for version 0.38.67. Other versions are generally untested and may or may not work.
The wheels may oscillate when stationary because they are optimised for low rolling resistance. Exercise caution when stopping or parking as they tend to creep.
The longer consists are extremely CPU-heavy. Expect very low frame rates if you connect multiple long trailer consists.
These vehicles are not designed to deform realistically in a crash.
Except for the front and rear, collision meshes are disabled for performance reasons. They can be reenabled by removing the 'comment' and 'end_comment' lines in the submesh section of the .truck or .trailer file.
With the exception of the sounds provided by BigBoy, all assets used are available for modding with no further permission needed. See the readme for specific file information and licensing details.
Hello, I decided to make some new versions to Arthur Hucksake's P30 stepvan. Their are 8 skins all with new features.
- A Thomas built buses school bus
- A Blue Bird Lake County Prison System transport bus
- A rusty old U.S. Extradition service bus
- A Sun Charter Company coach
- An Invis45 Customs Stepvan.
- A U.S. Forestry van
- A church bus
- A tow bus
Hello, it is Khadner back with yet another school bus. This time I turned the CE300 by Graysonk95 into a BlueBird/International 3800. In game it is called a CV200 because the photos I used for skinning said it was a CV200 so I apologize about that.
F1/F2 for the stop arms
F3/F4 for the door
Ctrl. 1 for the amber warning lights
Ctrl. 2 for the red warning lights
Ctrl. 3 for the roof strobe
- Normal school bus
- Pickup truck
The sounds are from an IH-T444E engine. The idle sound is not too good, just PM me on the forum if you want the original idle sound. Also, on the pickup truck version there is no separation between the driver's compartment and the bed.
Do not release any mod of this without asking both Graysonk95 and me for permission. If you have any questions you can contact me on the forum.
****Please note, this is the updated version. I had posted an earlier version with errors. I was not aware that they would both be posted to the repo. This one is better!
Authors: Bonehead, DT466BusMan, Dodge0359, nelson480, Box5diesel, khadner ,rorlover11, thatsnice ,IC CE300 (If you have worked on any part of the many versions of this bus over the years and have been left out, please let me know and i will add you)
Here is the school bus pack some of you have asked me about. I've changed it up a bit for some variety. Most are Blue Bird bodies but there is a Carpenter and a Thomas as well. They drive pretty realistically.Here is the lineup:
*1986 Blue Bird International S-1800 with an International Navistar 9.0L V8 Diesel and an Allison MT-643 transmission
*1990 Blue Bird International 3800 with an International Navistar DT360 Turbocharged 5.9L Inline six cylinder Diesel and an Allison AT-545 transmission
*1988 Blue Bird International S-1700 with an International Navistar 7.3L V8 Diesel and an Allison AT-545 transmission
*1996 Blue Bird GMC CV200 with a 366ci GM gasoline V8 engine and an Allison AT-545 transmission
*1985 Carpenter Chevrolet C/60 with an 8.2L Detroit Diesel Turbocharged V8 engine and an Allison AT-545 transmission
*1985 Blue Bird GMC 6000 with an 8.2L Detroit Diesel V8 engine and an Allison AT-545 transmission
*2007 Blue Bird International SBCV 3300 with an International Navistar DT466 7.6L Turbocharged Inline six cylinder Diesel and an Allison PTS 2500 transmission
*1979 Thomas International S-1700 with an International Harvester 345ci gasoline V8 engine and an Allison AT-545 transmission
This is a pretty large file and is very sound file intensive. There have been conflicts with the other school bus files with sounds not working properly or at all. These buses are not perfect and do not use any meshes that have not been seen already.
These buses do have seats and realistic parking brake sounds!