This is a new skin and minor steering/handling modification for Slooter3's Chevy Astro Limo. It has a new Christmas skin complete with christmas lights. For now, the Christmas Lights dont work because the flares were too bright, and I dont know how to make an emmisive. If you want to add an emmisive for the Christmas lights, feel free to do so, for other mods, ask slooter3.
Will not overwright original astro limo.
Hopefuly this gets approved by christmas!
Figured I would release a early version of this beast.
It is a 8x8 Oshkosh Hemtt
Features
-Mesh Body
-Animated windshield wipers
-Animated Gimbal Steering Wheel, and Gauges
-Fully independent suspension
-Realistic weight of 38,800lbs
-Realistic top speed of 58mph
-Tinted windows
-4 speed transmission
-Lockable Diffs
Animated windshield wipers controlled by CTRL+1 for low speed and CTRL+2 for higher speed. Remember to shut off one before starting the other.
Hi all.
I have relased a new bus.
This is my last relase this year.
I hope u like it.
What bus can to:
1. mesh wheels
2.mesh body
3.openable 3 doors
4.custon dashboard
5.nize detail.
This is the two axle verion of the NEOPLAN tourliner.
It has working dashboardindicators, collision and much more.
The README.pdf is included in the zip.
Please post any problems and discuss here: NEOPLAN-tourliner
Unfortunately I made a silly mistake, so RoR displays ;V 1.0 in the select menu instead of the name of the box... You can cin a fix for that in the fist post of the thread you find above.
This is a bobtailed 1st generation Dodge Ram 1500 Cummins. It includes two versions. One with a normal, thin rollbar, and (My favorite) one with an extremely overdone rollbar...
CREDITS:
Wheels: RORcat
Original mesh: Box5diesel
Mesh editing, NB editing, rollbars: TTT (Me)
this is the extreme offroad version of the toyota 75 serie
thanks to i_so_live_here for the orginale
its made to crawl and bogger
when you use the diff lockers put them off when not needed
and dont give full power or it will spin its wheels and loos traction
i made a rollcage on it
and put bigger wheels on and lifted it
This is the final and last version of Nissan 350Z for Rigs of Rods.
Even if the original submesh model of this car is more than 2 years old its still a headturner!
Since then I edited the nearly everyday to make it look, sound and feel like its real counterpart.
Here are the most important notes:
- the body and suspension is a RoR classic setup made out of a nodes, beams and a submesh
- the engine is tuned to behave like the original one
- the transmission should be shifted manually and has real gear ratios
- the car can easely go to 250 km/h
- the suspension is set up for both drifting and highspeed stability
- the sounds are carefully collected and mixed so can get that good V6 sound in your ear
- i havnt include a tire sound. it got annoying after a while
- there is also a roadster/ convertible version in the file
- and many more things...
I havnt a specific forum tread for this car. If you have questions or want to mod the please PM me.
Here is my latest Kenworth mod. This is a T600 "Anteater" which was first introduced in 1985 and was Kenworth's first aerodynamic truck and a very radical change from the W900 line. This specific model is powered by a C15 Caterpillar engine with a 13 speed transmission. It features a fully animated interior- guages, shifter, pedals and steering wheel. The truck also has diff locks for hauling heavy loads.
Huge thanks to Box5 for the original W900, Jerald for the sounds, Fidoj for fine tuning and everyone who provided support and motivation along the way.
In the pack is the photoshop file to create custom skins. The ambient occlusion names correspond to the truck names, i.e AO1 = T600_1, AO4 = T600_4, etc. (5 and 1 share AO1). When you save the skin as a .dds be sure you have the right AO layer selected and the others invisible, otherwise it'll be all screwed up.
This is a modded version of the IC-CE300. I noticed in the previous version that it was hard to stop. You would also be jerked when you shifted up or down a gear. I fixed that, and also fixed the common bug where the vehicles move slightly even when they are in park. This version goes contains a fixed paint that I did not make, but feel that it was better than the original. Stopping Distance is improved, along with the brakes. Credits to the original authors.
the lightning pack, so far there are two trucks that are done, one is the sleeper painted blue and one is the daycab which is option 5 and is painted a lush pink, this will replace your current files so i would back it up if you want the choice of standard or lightning, credits go to hemiboy for the permission and the truck, i modded the skin
Features:
Openable rear and side doors
Fully contactible submesh
Ties
Credits:
ElNoobio: kyle and sons skin
Korppi (Kuru): All meshes and N/B, some textures, basic skin
Salonen: better skin, ideas
Nexmartin: Refridgerator texture
The mod has logos of GGD ( municipal health ) and logo's of Ambulance and the car-number.
There is a logo's of 112 ( Emergency-line )
And the mod have a dutch ambulance siren
- CREDTIS -
Mod making by: Lennie
Objects ( lightbar, working doors etc ) making by: firepics
Skin making by: Mooijtje
Siren: Mooijtje
__________
I hope you like it, and: HAVE FUN
_______________________
[NL]
Dit is een mod van een Nederlandse Ambulance
De mod heeft logo's van GGD ( Gemeentelijke Geneeskundige Dienst ) en logo's van Ambulance en de auto-nummer
Er zijn logo's van 112 ( Hulpdiensten-lijn )
En de mod heeft een Nederlandse Ambulance Sirene
- CREDITS -
Mod gemaakt door: Lennie
Objecten ( lichtbalk, werkende duren etc ) gemaakt door: firepics
Skin gemaakt door: Mooijtje
Sirene: Mooijtje
These are skins for the KME Predator.
The Predator is not my truck but I created the Skins for the truck.
These skins are Pennsylvania fire companies except for the all black which is Norfolk MA, and the South Park Show truck.
This is an 8x8 Offroader based on a MAN-TGA chassis.
It is made for offroading so don't expect it to handle well at high speed.
However, I tried to keep it as highspeed-friendly as possible.
But the main aim is to perform well in rough terrain.
In the readme, there are instructions on how to enable the enclosed wheel meshes.
This vehicle features the "Driving right out of the package" concept.
So put it straight into your data/packs folder and you'll be fine.
Please note that it is my first vehicle and I''m still learning
This is the Unimog from my avatar, which I made way back in 2007 but never really finished it.
Despite that, I still recieve questions about where it can be downloaded - so I decided to finally upload it here
Please keep in mind that it was originally made for RoR 0.31a and updated to use (well, at the time) break-through 0.32 tech (aka. flares )
It features a crappy suspension, a tipper which can be operated by F3/F4 (lower/raise tipper) and (F5/F6) close/open backboard and two (!) trailer hitches (front/back) which actually work (in 0.38, that is)
Please enjoy, mod as desired, comment on it here, but most of all: have fun!
This is yet another mod to RORCAT's Jeep. I made it into a CJ-7, with real-ish behaviour. It has the stock motor values, excluding the Diff Gearing. That is the real gearing.
FEATURES:
NOTE: The sounds are off of an OLD Jeep!
Good suspension
New Submeshed features
CJ bodystyle (Less fender, more body)
Locked, Open and Split diffs
Custom Sounds
This is a Peterbilt 359, they both have bags so u can drop it low. Pretty good driving and thanks trevor for this great but old semi. By the way this is my first repo and i hope its good
authors: trevor and me for mods
Included in the pack is:
- Manitou telehandler with coupling for attachment
- Manitou telehandler with truss boom
- Manitou telehandler with winch
- Bucket attachment
- Forklift attachment
- Counterweight loads
Version 1.2
- Skin selection menu removed (download skin pack instead - see forum link)
- New torque curve
- Flares added
- Working lights/beacon added (Ctrl-1)
- New Manitou winch version
- 2 Counterweight loads
added the following
5th wheel version with ball mesh courtesy of Diesel Smoke
light bar with working flares on all versions. CTRL-1 for flashing lights on light bar.
beacon on each version
light bar is from the repo thanks to dodge0359a
improved power,braking and hauling abilities.
This is my first upload on the repository. I made a Belgian ambulance skin for the RTW Sprinter ambulance.
It features a prototype ambulance from Tournay fire department (located West of the Hainaut province, in Belgium's French-speaking part). The car number is fictional, as there are only 4 ambulances in the fire department.
I added the emergency call number (100). It should normally be 112 (European emergency call number), but not all vehicles already had the number changed.
I also added the official logo of the fire department's ambulances on both sides of the vehicle: the blue star, with a tower (city's emblem) and a firefighter helmet, a caduceus and 3 lily flowers
Unfortunately, I couldn't find any Belgian ambulance siren, but if you have one and want to share it, please send me a PM so that I can completely finish the mod
Feel free to give me feedback on that by MP (I'm new on the forum, I don't know how to create a discussion forum, and maybe it would be unnecessary to do so as it is just for a skin)
Enjoy this new Belgian vehicle (there are some screenshots in the file)
CREDITS:
Mod originally made by Lenni
Objects made by firepics
Skin made by Belgianrorfan
(I apologize for any mistakes, my mother tongue is French)
__________________________________________________ _____
Aarzel ook niet om mij feedback te geven via het RoR-inbox (ik melde een paar weken geleden aan, dus weet ik nog niet wat ik moet doen om een discussieforum op te starten, maar aangezien het alleen maar een skin is, zou het misschien onnodig zijn)
Ik hoop dat u van dit nieuw Belgisch voertuig zal houden, veel plezier daarmee! (er staan een paar schermafbeeldingen in het bestand)
CREDITS:
Mod gemaakt door Lenni
Objecten gemaakt door firepics
Skin gemaakt door Belgianrorfan
(sorry voor eventuele fouten, mijn moedertaal is Frans)
This is an essentially imaginary truck made from scratch. I've tried to base it loosely on trucks from the 1930's and 40's but its unique. It has meshwheels, a contactable bed and i've tried to give it as close to real handling as i could. Yes its huge but my sketchup ogre exporter stopped working so i cant resize it.
Credits go to: Fordfan for the chassis and me for the mesh and chassis tweaks.
A Scania ampliroll, based on the default Scania loader by Pricorde. I made this a while back (now added UID and a miniature file).
Works nicely in the latest version(0.38.43). NOT tested with older versions.
Hello, this is Khadner back with a International 9800i wrecker and loader. This is a mod to the Scania Wrecker and Loader by Pricorde. If you would like to release a mod to this specific version you may just please credit me and notify me via the forums if you do. All the commands are the same as the Scania wrecker and this vehicle can be accessed by pressing 'R'. If you have this vehicle out and you press 'R' you will end up in this vehicle unless you spawn another Scania wrecker after this one.
UPDATE: I've been working on a variation of my own and it's complete, or close enough. It is fully submeshed and will contact with other vehicles(that must to be contactable). It's sides and tail can fold down. The rear rollcage can be lifted using Ctrl+F4/Ctrl+F6. It has ties in the back so you can drive an vehicle into it. Unfortunately all the stuff I added makes it too "tippy" to carry a vehicle into water anymore but driving on land is fine. Also has a trailer hitch that can be completely folded away if you're not going to use it. All controls are listed in-game. Have fun.
This is an Tatra 813 pack I modified from Pricordes original versions and added "Wheels2" to all of the models so you can inflate/deflate the tires. Also updated to work properly in the latest RoRs release as it was having texture issues before. Use [ to deflate and ] to inflate the tires. This is not as easy on your system as the originals were. They were only about 1300 beams before, now each has over 2800 to properly simulate the wheels. [read more]
newvwbus.zip
view details
)
Gold
Silver
Bronze
