This is my crawler. It crawls stuff. Also my first ever working N/B. I know, it has no mesh, the N/B isn't perfect, it rolls over if you turn over 20mph blablablabla. If you don't like bare N/B chassis', then don't download and post a 1 star rating because it doesn't have a billion poly mesh and complicated crash physics.
This is the Unimog from my avatar, which I made way back in 2007 but never really finished it.
Despite that, I still recieve questions about where it can be downloaded - so I decided to finally upload it here
Please keep in mind that it was originally made for RoR 0.31a and updated to use (well, at the time) break-through 0.32 tech (aka. flares )
It features a crappy suspension, a tipper which can be operated by F3/F4 (lower/raise tipper) and (F5/F6) close/open backboard and two (!) trailer hitches (front/back) which actually work (in 0.38, that is)
Please enjoy, mod as desired, comment on it here, but most of all: have fun!
Introducing the fix version of the Jeep Wrangler Unlimited
Been in progress for about 10 months
This is a Fixed version for the newest version of RoR. There is no longer a selectable skin. Until there is a new system of selectable skins its the Jeep Green.
The suspension is also updated and is acting more realisticly
+Animated steering wheel
+Animated Shifter(manual transmission)
+Animated locker shifter
+Animated parking brake
+Animated Locker on Rim
+Animated gauges(Speed,Tacho, and gas(it just goes down slowly))
+Choosable Skin color
Meshs, N/B, and prop placing - MICRACER
Suspension, N/B tuning, Weight tuning, engine tuning - LIFTER
(Thank you for all your help)
I decided to add full collision since Multiplayer now has collision. They should crash somewhat well into each other. You can crawl on them with the truggy or other big vehicles There also Blue in this version.
This is a standalone zip, so just place in packs or vehicles folder and play.
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION OF ROR.
Gavril Omega by Gabester Now with meshwheels2, ABS, and traction control, as well as other minor fixes and improvements!
The Omega is an off-road sports sedan. Choose from three versions:
Omega Six - ~300 horsepower I6 diesel base model
Omega Ten - ~500 horsepower V10 with bigger wheels and lifted suspension
Omega Twelve - 600+ horsepower V12 with a lightened chassis, stiffened lowered suspension, and street tires
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Stable on-road handling
Excellent off-road capability (except for the Twelve)
Four wheel drive on all models
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK IN AN OLDER VERSION OF ROR.
Updated with improved suspension, handling, and crashing behavior! The exterior camera is also now correctly centered on the car.
Gavril Zeta by Gabester
This is a compact SUV.
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Stable on-road handling
Excellent off-road capability (except for the R and 2WD)
ABS and traction control
Meshwheels2 for sharper handling
Please DO NOT modify this without my permission. Thanks.
All functions work by press once functionality, also winches, so when you press the extend button once, the winch will keep extending, until you press again.
F5-F6 Front Winch
F7-F8 Rear Winch
F11-F12 Drop sides
W Diff Lockers (Open, Rear Locked, Both Locked)
N Driving lights
3D models, textures, N/B, truck -file and custom sounds are
A shader script and a material script are by Box5Diesel.
Core beta testers and useful help: Braskus, Gabester, and many other forum members.
Thanks to all beta testers and to everyone else who helped me at the
Well here it is. The official release of my not-so-official FJ cruiser.
I worked nonstop on this car for a year and a half, and gave up about 6 months ago due to just loss of interest.
I had been talking to some friends recently on the forum who said they would really like to see it tidied up
and released. I dont exactly have some long drawn out story about how it got to where it is. It was really just
a huge learning experience. but finally decided to let it go because I lost all of the original files to the mesh.
I suck at writing. So heres a list. :|
pictures to the left- taken an edited by my main man, Ferrettank!
Known problems are as follows:
Missing quite a few meshes. (Mainly suspension pieces)
Interior is incomplete.
And there is a material bug with it on Deags Trail Island map. For whatever reason, the tires are yellow. I cant figure it out...
This was my first try at animated props, flex tires, and flares, so it is what it is! Hope you enjoy it.
Also, modding, do as you wish, post pics as you wish. I dont really care. But if you'd like to release any of your mods (and credit me ;D), please ask my permission first.
The Volkswagen T3 Van.
You will get some different versions, so you can explore the racetrack as well a deep mud and high mountains.
Stock Volkswagen T3 van with rear wheel drive. Has a locker in the back for difficult situations like towing a trailer.
A tuned and lowered T3 RWD. It is more light-wight, has a stiffer suspension and a rear locker (split - locked) for a good handling and easy drifts.
Stock Volkswagen T3 Syncro with four wheel drive and two lockers (open - rear locked - both locked). It has a special gearbox with a extra low crawler gear and is optionally available with rear wheel steering.
4WD Syncro military
Lifted T3 Syncro with a bit bigger tires and modified bumpers for greater attack angles.
It comes with a camouflage skin to be nearly invisible on Belgium terrain.
Also available with rear wheel steering.
All versions except the race one have a deployable hitch for towing trailers, just attach a camping trailer and go camping
And please don't complain about its boxy look, the real car is as boxy, too.
Commands: press T to see the commands ingame
Rear wheel steering (some versions):
F3 and F4
Press F6 to deploy the hitch from under the car. Use the hitch only when it's deployed!
Press F5 to retract it again.
Update: The Airbrake sound is removed since it doesn't suits a car.
Update 2: - Improved handling and more realistic engine and gearbox settings, now it has realistic power and its real gear ratios.
- New mesh wheels and mesh parts for the race version (from Buttlamo's Vehicle Customization Parts thread).
- New mesh wheels for all syncro versions, big thanks to dmtactical for letting me use the wheels of his Nissan Hardbody.
- This is a project of Silvermanblue and me, so I haven't done all the work. If you like the car, please thank him, too!
- This project is based on a heavily modified highroof van from Trevor, he has full credits for the base chassis.
- Mesh wheels (Race version): Cydex
- Air intake, intercooler and exhaust: Beolex
- Mesh wheels (Syncro version): dmtactical
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
this is a heavily modified version of arthur_hucksakes model t.
this is my first mod
it is more controlable. it is 4 wheel drive.
it will go to speeds of 160.
i have slightly mod ified the bode by lengthening the trunk and changed the windsheild.
the ride hight was changed.
the suspension was heavily tuned so now it will go of jumps and go around corners easily.
i have modified the skin and took out the seats also.
Here is another version of my Ford F-650 I put ford logos on it new rims and a blue strip on the side and that pretty much it. and it won't overwrite the RBP version. It is the same as the RBP truck just skinned differntly. Have fun with it
thanks to grayson k 95 for the help and thanks to him for letting me skin it this is the ce300 mod orig by grayson it has baldwin havens and original files only i will update it tomorrow or whenever with more skins all credit goes to graysonk95 and 1 % goes to me skinning
It's a submeshed Geo Tracker (stock height/tires size) that I don't plan on updating much as I'm working on a fully flexbodied version. I didn't weight tune it so that's a little off, I'll update that sometime soon hopefully. The shocks and engine work well and it doesn't handle too unrealistically; I have a lot of fun just playing around with it. It's pretty capable off-road as-is with the lockers. It should show up in unsorted vehicles category since I haven't figured out how to change that yet.
These are re skinned trevors peterbilt 359s made to look like western star trucks. i am the skinner to a point, the skull on the side is part of a skin by "marco" so he gets credit for the skins also. i added all the rest. have fun.
Credit- Trevor- Trucks
-Marco- skulls on skins
Authors: sirendude 2011 and various members for support.
This is a pack of all of the vehicles I have made in the past 4 months. All of the cars are N/B only, don't have submesh, and some have no engine tuning.
none of these vehicles float, and one car (siren's auto 12x12 special) has all wheel drive, all wheel steer, working reverse lights, headlights, brakelights, and turn signals (flares). Some vehicles have opening hoods and doors.
Vehicles in this pack:
a 6x6 pickup truck called "mud slinger" (includes a Monster Truck version)
a 4x4 pickup truck simply called "pickup truck"
a few muscle cars/ sportscars (they are "highway terror", "lancia delta N/B Car", "tire burner", and "muscle car")
a school bus
a few offroaders ( they are "rock locker", "redneckrickem's dune buggy" (a YouTuber's buggy), "traxxurator"+"traxxurator dump" and "4x4 offroader")
a motorcycle (it has training wheels for stability :P)
and an engine that uses negative shocks to run, just give it a spin with the mouse and it runs. (be careful it explodes after a certain RPM)
You have the freedom to do whatever you want to these vehicles, but give me credits for the vehicle's N/B.
To open a hood or door, press F1 - F4. These commands do different things like open and close a door or hood.
Many months in the working it's finally here
Various modified version made by me. all the ones with more than 2 axles, the 3rd axle is liftable and the ones with more than 3 axles the 4th and 3rd axle are liftable.
on the heavy haul versions with 4 axles only the front axle is liftable.the heavy haul versions can haul 200tons, mainly the 3axle and 4axle versions.
Kenworth T800W tri-axle Daycab longframe
Kenworth T800 daycab short frame
Kenworth T800 daycab short frame Tbox
Kenworth T800 4th axle Extended Flatbed
Kenworth T800 boxtruck 4th axle
Kenworth T800W toolbox tri-axle Daycab longframe
Kenworth T800W sleeper tri-axle longframe heavy haul
Kenworth T800 tilt Flatbed long frame 4-axle
Kenworth T800 dumptruck 4th axle
Kenworth T800W sleeper two-axle longframe
Kenworth T800 2 axle Extended Flatbed
Kenworth T800 sleeper Extended Flatbed tri axle
Kenworth T800 sleeper short frame
Kenworth T800 sleeper short frame Tbox bed
Kenworth T800W sleeper toolbox tri-axle longframe
Kenworth T800 sleeper Flatbed short frame
Kenworth T800 sleeper short frame heavy haul
Kenworth T800 Long frame Logtruck
Kenworth T800 longer Tanker
Kenworth T800 Extended Flatbed tri-axle
Kenworth T800W two-axle Daycab longframe
Kenworth T800 Daycab 2 axle shorter frame
Kenworth T800 two axle boxtruck
Kenworth T800 dump truck 2 axle
Kenworth T800W Daycab heavy haul tri-axle shorterframe
Kenworth T800 tilt Flatbed long frame Tri-axle
Kenworth T800 Tilt Flatbed regular frame
Kenworth T800W sleeper heavy haul 4-axle heavyframe
Kenworth T800W Daycab heavy haul 4-axle heavyframe
Kenworth T800 tri axle boxtruck
Kenworth T800 Flatbed short frame
Kenworth T800 terrain editor
Commands for the Various trucks that have liftable objects.
All truck have opening hoods F3-F4
Kenworth T800W tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800 4th axle Extended Flatbed F9-F10 for lift axle
Kenworth T800 boxtruck 4th axle F5-F6 for lift axle
Kenworth T800W toolbox tri-axle Daycab longframe F7-F8 for lift axle
Kenworth T800W sleeper tri-axle longframe heavy haul F7-F8 for lift axle F9-F10 for movable fifth wheel
Kenworth T800 tilt Flatbed long frame 4-axle F-7-F-8 to lift axles F9-F10 to lift bed F-11-F-12 to open tailgate
Kenworth T800 dumptruck 4th axle F5-F6 to open dump door F7-F8 to lift dump body F-9-F10 to lift axles
Kenworth T800 sleeper Extended Flatbed tri axle F7-F8 for lift axle
Kenworth T800W sleeper toolbox tri-axle longframe F7-F8 for lift axle
Kenworth T800 Long frame Logtruck F5-F6 to open invisible door so the logs don't fall out. press K to view skeletal mode
Kenworth T800 Extended Flatbed tri-axle F7-F8 for lift axle
Kenworth T800 dump truck 2 axle F5-F6 to lift dump body F7-F8 to open dump door
Kenworth T800W Daycab heavy haul tri-axle shorterframe F7-F8 for lift axle
Kenworth T800 tilt Flatbed long frame Tri-axle F7-F8 to raise axle F9-F10 to raise bed F11-F12 to open tailgate
Kenworth T800 Tilt Flatbed regular frame F5-F6 to raise bed
Kenworth T800W sleeper heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800W Daycab heavy haul 4-axle heavyframe F7-F8 for lift axle
Kenworth T800 tri axle boxtruck F7-F8 for lift axle
Starling 911, this is Starling Engine 1 responding. Yes ladies and gentlemen, I this is my first upload, and I have made a skin for the KME Preditor by Cydvx and Pascal. With Cydvx's permission I am releasing it. Now mind you this is a Standalone skin, Instructions are in the zipfile. they should help you.
Credit: Cydvx and Pascal for the original KME and Blank skin
Milan42 (me) for the Starling Engine 1 skin. Hope you like it.
This is my mod of my previous mod called (MTVR2). This is a purely off-roader truck, it has 10 wheels and go's just about anywhere. The original version of this truck came with older versions of ROR so anyone who has used ROR for a while should remember it.
More fps friendly then last version
reworked all the suspension with "shocks2"
removed "wheels" section and added "wheels2"
added a steerable rear axle
added grip nodes to the tires
truck now floats
can now change the PSI in the tires
This truck is not a looker and isnt meant to be, its meant to be a usable vehicle, it go's anywhere in ROR you want and will in fact climb up vertical walls. This truck is almost indestructible even after being drivin off a cliff usually a collapsed wheel is all that happens. It has so much torque and traction that if you give it full throttle from a dead stop in 6th or 7th gear it will wheelie up and over backwards. You can still tow trailers with it just hook them up to the receiver and lock it down with L.
This is my "LÃ¶schgruppenfahrzeug 16/12" in english a Fire Engine.
You can open the doors of the cabin and the equipment structure with the F1 to F10 key.
In the back of the truck is a hose reel that you should load up.
So you can move the holder up and down with Ctrl+F1 and Ctrl+F2 and you can change the angle of the hose reel (Ctrl+F3 and Ctrl+F4) so its a little bit easier to hook it up (with "O")
Credits: The truck is copletely made by me (the Fire Extinguisher in the cabin is from the Sketchup Gallery and the wheel texture from RoR)
Hier ist mein LÃ¶schgruppenfahrzeig 16/12 (LF 16/12)
Man kann die TÃ¼ren der Kabine sowie des Aufbaus mit den Tasten F1-F10 Ã¶ffnen.
Die Schlauchhaspel hinter dem Auto kann man anhÃ¤ngen (mit der Taste "O")
dazu kann man die Halterung mit Strg+F1 oder Strg+F2 Hoch und Runter Bewegen.
Den Winkel der Schlauchhaspel kann man mit Strg+F3 und Strg+F4 Ã¤ndern.
Credits: Das Fahrzeug habe ich bis auf den FeuerlÃ¶scher und die Textur der Reifen komplett selbst erstellt
I am happy to present the preliminary release of our Chevrolet Express n/b mod. Do to some real life issues I am releasing this somewhat incomplete. Most of the vans are fully drivable and have a full set of flares. Some of the others have half finished flares. They all have dashboards and seating. Also comes with a crappy lightbar that I made by myself.
Modding will be allowed and encouraged. However I request that ALL parties be credited. I will have a list in this post and on the README file in the zip. I also would appreciate displaying your modifications in this topic.
Creak = Chassis
Silvermanbblue = Body, skinning and some meshes
09challenger = Sounds
Khadner = School bus version consultant.
ROREMS = Ambulance consultant
Bonehead = for his blower mesh
VeyronEB = Camper and limo versions (Future versions in progress)
NO weight tuning, these are not realistic in the weight department.
Some flares missing on certain versions
Suspension issue with the class b camper
1.> All four suspensions works like a charm... Flexing Good.
2.> 4x4 drive with traction control and lockable differentials.
3.> Weight of vehicle is revised.. CG lowered.
4.> Stable Wheels.
you are free to use it for mods or develop on this.
Just remember to give me credit.
This is my 1964 Jeep Wagoneer.It is currently a rock crawler/mud truck.The jeep has working hydro's in the rear to stiffen the suspension & it also has a hitch just in case you decide to pull something with it.
This is the current 1st place holder for the Futurotrack easy (unlimited class) (http://www.rigsofrods.com/races/race/67). This track is about the only thing it excells at. It is terrible at every other task. It has locking Differentials, and an incredibly powerful engine.
Authors: Me (Everything)
If the game freezes or the engine doesn't make a sound then restart the game and everything should work fine.
This is the first mod i'm releasing. Its number 1 in my line of conceptual, mostly chain driven vehicles.- its more focused on design than realism
Ive designed this to be a futuristic, 2-seater rock crawler. it features complete independent suspension- achieved through the use
of arms which use ( theoretically) torsion instead of shocks.
a second version includes the ability to control each arm individually, sacrificing some natural suspension travel in the process.
controls are in the readme.
enjoy, and please ask before releasing any mods/using parts
Here's my jeep, it's been in development for nearly a year, it's my first vehicle that I finished.
-Seperate hood/grille, for (atleast decent) deformation (My first try):
"Deformation is awesome." -Gabester -Dana 44 axles
-Atlas II transfercase
I've used real life gear ratios from both the gearbox and transfercase.
With custom sounds.
Credits to Fat-Alfie for his shock texture.
-38" Pitbull Rockers
-Custom made rollcage
-Openable boot and bonnet
-A wide variety of moving parts
-Super soft tyres
Thanks to Fat-Alfie's wheelbeams
-and lots more.
[18-03-2012]-Fixed the idle sound, added ropables, made steering stronger. [08-05-2012]-Wheels tuning: added meshwheels2 and did some more tuning to Fat-Alfie's wheelbeams. Less bouncy wheels, better handling on and off the trails. -Minor fixes.