Here's a trailer I made awhile back with a detaching Neck. It can haul some big stuff, has a flexbody deck that bends flat with a heavy load and flexes over bumps. Its not all that finished, but its as finished as its gonna get, lol. I made a video to show how to use it
Ctrl F1 to raise the neck so you can back under and lock on
Ctrl F2 seats the neck on the hitch after you locked on
Ctrl F3 attaches neck to the trailer
Ctrl F4 detaches neck so you can drive it out of the way to load/unload
this is a mystery load, its contactable and has 4 rope able nodes so u can load it onto a trailer,
there is nothing under the curtain so look all you want.
it weighs 9000kg in total.
These are an update to Aperion's logs he made back in 2007. These are uploaded with permission.New: New Texture, with a bark texture (not debarked) New Weight (2T, 5T, 10T) DOES NOT OVERWRITE OLD LOGS.
Here is a large I-beam load. It weighs at 12 tons. It can be loaded on a flatbed trailer and hauled to a construction site. It is also contactable so cars with a contactable submesh will be crushed by the beam.
'Feel free to retexture it, resize, make it smaller longer bigger or shorter. You don't need my permission for this creation.
Here is a Flat screen TV that you can load into the back of a pickup truck. It is contactable to vehicles that have a contactable submesh.
Included is a template to add your own image to the TV screen.
I was bored, so I made a simple, just a nodes-and-beams-submesh toilet, that can be picked up with a crane and loaded onto a flatbed.
It has a contactable submesh, contacters and 4 ropables in the bottom and weighs about 1 ton.
No fancy stuff or anything...What you see, is what you get.
I uploaded this to the forums quite some time ago and now decided to upload it here. Discuss here
This is a skibox which can be attached to both tourliner versions.
The README.pdf is included in the zip.
Please post any problems and discuss here: NEOPLAN-tourliner
Unfortunately I made a silly mistake, so RoR displays ;V 1.0 in the select menu instead of the name of the box... You can cin a fix for that in the fist post of the thread you find above.
Total 5 loads you can have fun whit including a fire flatbed that is high detailed whit working watargun!
All the container with doors or ramps:
Open/Down:F8
Close/Up:F7
The fire container:
Turn water hose:F1-F2
Down and up water hose:F3-F4
Note that need to seat inside the fireflatbed to start engines and control watergun!
Kenworth Transfer Dump Truck
A transfer dump truck inspired by a request on the forum.
Credits go to Box5Diesel for his Kenworth truck.
For information on how the system works see the request and showrooms thread.
Feel free to modify, but use a different unique id to make it not conflicting with my truck.
Skins for Box5diesels Kenworth should work on this truck, but I'm not sure.
I've fixed a little bug with the material of the trailer dump box.
This is a modular house often used on constructions site or as a modular office. It is a simpel mod of the 20ft container by LostSoul3471. I added 4 more hock nodes, this will not efect how the container forklifts handles it, but make it easier to lift it with cranes. I also made it lighter than the original container. you can stack them on each other. It is fully independent and will not overwrite the original containers. It is still a beta.
37.00-R57 tire from a Komatsu 730E-7, load weight 4000kg, usable as a chock for other loads or to load onto a trailer for transport or to roll down a hill for a laugh.
if you wanna use it for something else add my name with it or at least send me a message.
this is canal boat, this contain 2 versions a newish one and a old one, these are just loads for transport and i cannot guarantee they will float properly and they have no propulsion system.
if you wish to use these loads for anything else please add me name and or at least contact me.
A telecopic trailer based on OVB-55-03V(T) model from Nooteboom.
features and commands:
- can extend up to 40m (CTRL+F1/F2)
- manual steering (F7/F8)
- adjutable suspension (CTRL+F3...F8)
- drop sides, to prevent falling loads (CTRL+F9/F10)
- fully working ligths
- avaible in 3 colors: red/yellow/blue
All commands are written on the front left side of the trailer
Transportable traffic lights for construction sceneries.
The pack contains two traffic lights, spawn one of each of them to have correctly alternating red and green lights.
They are transportable and can be lifted with cranes.
This my skin for the great dane its for my group RoR AirForce.
i have permission for the skin
thanks jerald900 for the original http://www.rigsofrods.com/group.php?groupid=140 Heres the link for the ror airforce if your wandering
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
Here is my first mod i made all on my own. It doesn't have a contactable submesh, because people who said they would do it didn't. It is still a beta, however, i want more people to test for further problems. Once i can move around some nodes here and there and get everything just right, then it will be ready for a final release. Check out the thread for it, i need feedback here and there for my trailer. Hope you guys have fun hauling this around when you are bored. Happy holidays!
this is a tandem axle fully enclosed trailer,
its optimized to carry about 3.5t.
commands are
ctrl+f1/f2 trailer jack up/down.
ctrl+f3/f4 fold trailer jack back/forth.
ctrl+f5/f6 open rear tail gate.
This my Goldhofer STNL3-Platform trailer "Speedy".
"Speedy" is a very flexible and light platform trailer.
Commands:
CTRL+ALT+F1/+F2: lower/raise trailer legs
CTRL+ALT+F3/+F4: lock/unlock steering (lock for reverse driving or extending trailer/steering is locked when trailer spawnes)
CTRL+ALT+F5/+F6: extend trailer
CTRL+ALT+F7/+F8: raise/lower liftaxle
CTRL+ALT+F9/+F10: raise/lower trailer ramps
Note: All commads exept ramps are one-press-commands.
Hope you like it :-)
This is my first upload. I made ?pallet of gold for you. They are four variants ( 1095 kg,1976 kg, 2912 kg, 3432 kg). Sorry for my bad english. Enjoy it
Autor: Pedro
Vojta1991
this is the ekeri trailer(full file) which i now has skinned over to be a scandinavian nor-cargo trailer
*all credits to the original author*
if you are going to do changes in the skin, let me know!
A simple reskin of the 45 foot trailer made by Donoteat.
It is a arctic cat skin showing alternative decals than the original.
Credits goto Donoteat for the trailer.
Skin by:ME
this is my modification to Box5diesel's sledpull
I added an engine an other skin and a beacon
credits: Box5diesel for the original sledpull
and me ( jerom ) for the modification's
This is a pack of wooden crates. I have attempted to make them sort of high-detail and I think I have succeeded for the most part. There are many variations inside, so look at the list below. In the future I am willing to make more requests for different versions. These crates have a 'hooking point' for cranes and also have 'ropables' so you can fasten them to other vehicles. They also include a submesh so they can be contactive with other submeshes/contactive structures. They emit really good framerate because of the simply-low node/beam count. They can be used in groups without affecting your framerate heavily. There are many versions, too.
Normal (OSB)
IKEA
THW
UN (UNHCR)
U.S. Army
TNT Crate
Radioactive biohazard
DHL Express
Soviet Crate
CREDITS
Beolex - 3D Modeling/nodes & beams/texturing
Venem - Assisting with beam color
This is a basic traffic cone I had knocking about for quite some time. You can either use a crane to move it around or place them on a terrain.
It has a low polygon count and has a very simple node and beam structure, so you should be able to spawn many before getting a large FPS drop.
It is also contactable + ropable, and is ~1m high, weighing 7kg.
Credits:
Metalmuncher: Meshes, Node and Beam, Texture
Requires a recent version of Rigs of Rods: 0.38.42 +
Throw it into your packs folder in My Documents.
No need for permission to modify or use, just credit me.
Pull the trailer next to the load so the rear part is at the right place.
Disconnect the rear part with F11 and pull the front part to the front attachment point.
Use a crane to put the load on, the wood load also has invisible legs so it can be loaded without crane, use F9/10.
The steering strength can be adjusted with F5/6 to fit to the length of the load.
The rear part has manual steering for special situations: F7/8, don't use when the steering is already at maximum angle!
The legs fold in automatically if you pull them up with F1, hold F2 until they fully fold out.
The load will attach on the trailer automatically once it is close enough to the right position.
To unload push F12, but attach it to a crane first and put enough tension until the trailer almost lifts off!
Thanks to Lifter for the hookgroups and triggers and for support with this project!
Thanks to fidoj for his roof part load!
Please do not modify this without my permission,
skins can be added using the skin file system: skins-working
If this system is used properly then no need for my permission for skins.
second upload to the repository another skin for my company rormart this skin is for the Ekeri trailer for 6x2 Scania R560 that kuru made to install it you just put the DDS file in to your ekeri.zip and you done!
This is my new lifting equipment for lifting a concrete floor.
The lifting frame will automatically attach to the floor when they are close togheter!The floor can be detached with CTRL+ALT+F9/10. Be sure that your crane has forwardcommands otherwise this won't work!
K100lowboy.zip
view details
Gold
Silver
Bronze
