This is the dumper-version of my Mercedes Kurzhauber. Everything is made by me. Its ropable, so you could also carry it.
Its a bad frameeater, but you can deactivate the mirrors and the mesh-wheels if you ve poor framerates.
Its not already done, but for the moment its some nice stuff i think.
you can connect trailers to the front- and the back-hook
You can lower and lift the supports with F1/F2
You can lower and lift the Dumper with F3/F4
As long as you give me credits, you re allowed do verything you like to and that makes the trucks better.
Using parts of my trucks for your own project surely also allowed, only let the people know who has done the originals.
It was nice to get an PM if you plan to publish it on other sites than these.
Also, you can do whatever you want with it, take parts, repaint, change rims, I don't care, just give credits if you are going to release something using these parts.
Do not edit the MESH in any way shape or form without my permission. If you want to use
the n/b all I ask is that you PLEASE consult with me first. Public or private. You are free
to make custom colors, change the motor, wheels, etc. But do not edit the verts on anything
here in this zip.
Credits:
darn_it: Main 440 engine and U-joints
eclipse/faustknight: Rear Dana 60
Tenderpaws: Transmission
ADR's Carmageddon 2 cars: Some textures
Mythbuster: Support, a lot of testing, and being there for rebounding ideas.
Jaw-4: Testing, support, and being someone to talk to.
PRT-Audiman: Sound and tuning help
Skyhawk: Mini's
Jaimswallace: Awesome teaser video
Dkutch: Everything else.
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK IN AN OLDER VERSION OF ROR.
Updated with improved suspension, handling, and crashing behavior! The exterior camera is also now correctly centered on the car.
Gavril Zeta by Gabester
This is a compact SUV.
Six versions:
2WD
SWB
LWB
Crawler
X
R
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the R and 2WD)
Flextires
ABS and traction control
Meshwheels2 for sharper handling
Please DO NOT modify this without my permission. Thanks.
UNIMOG 406
Been a long time in the works. Finally came to a spot I want to release it. No opening doors or dump bed, didn't wanna fuss with that stuff since I never use them. It has detail where it counts I think, in the suspension parts, texture work, damage, etc. Has a rear hitch for towing. Hope you like it.
Disclaimer:
-mods for personal use ok, but don't ask to release your super engine power lift kit mod, or to use the rims/tires on your vehicle to showoff, it ain't gonna happen, yo.
YOU MUST HAVE AT LEAST 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION.
Updated with modeled panel gaps! Fixed UV mapping on Army version!
1949 Ford by Gabester
The 1949 'Shoebox' Ford was the first all-new design to come out of Ford after the war, featuring a stylish aerodynamic body shape and sophisticated independent front suspension.
Features:
Realistic performance
Detailed flexbody
Full interior
Collidable submesh
Custom sounds
Separate detaching parts (hood, fenders, doors, trunk, headlights, and bumpers)
Five versions (Club Coupe, Moonshine Special, Tudor, Fordor, and Indiana Jones US Army)
Flextires
DO NOT modify this without my permission.
You need a fast computer to handle this car. Requires .38.33.
added the following
5th wheel version with ball mesh courtesy of Diesel Smoke
light bar with working flares on all versions. CTRL-1 for flashing lights on light bar.
beacon on each version
light bar is from the repo thanks to dodge0359a
improved power,braking and hauling abilities.
Well here it is. The official release of my not-so-official FJ cruiser.
I worked nonstop on this car for a year and a half, and gave up about 6 months ago due to just loss of interest.
I had been talking to some friends recently on the forum who said they would really like to see it tidied up
and released. I dont exactly have some long drawn out story about how it got to where it is. It was really just
a huge learning experience. but finally decided to let it go because I lost all of the original files to the mesh.
I suck at writing. So heres a list. :|
Everything-me.
pictures to the left- taken an edited by my main man, Ferrettank!
Known problems are as follows:
Missing quite a few meshes. (Mainly suspension pieces)
Interior is incomplete.
No damage.
And there is a material bug with it on Deags Trail Island map. For whatever reason, the tires are yellow. I cant figure it out...
This was my first try at animated props, flex tires, and flares, so it is what it is! Hope you enjoy it.
Also, modding, do as you wish, post pics as you wish. I dont really care. But if you'd like to release any of your mods (and credit me ;D), please ask my permission first.
This is a FINALLY released pack of tow vehicles COMPLETELY made by Thatsnice. I recieved this file with the request of doing flares and easing up on the FPS Drop.
Authors: Thatsnice (Node/Beam, Meshes), PArescueEMT (Flares and mesh editing)
I am releasing this with permission from TN as this seems to be a sought after mod.
YOU MUST HAVE AT LEAST RIGS OF RODS 0.38.33 TO USE THIS CAR. THIS CAR WILL NOT WORK WITH AN OLDER VERSION OF ROR.
Gavril Omega by Gabester Now with meshwheels2, ABS, and traction control, as well as other minor fixes and improvements!
The Omega is an off-road sports sedan. Choose from three versions:
Omega Six - ~300 horsepower I6 diesel base model
Omega Ten - ~500 horsepower V10 with bigger wheels and lifted suspension
Omega Twelve - 600+ horsepower V12 with a lightened chassis, stiffened lowered suspension, and street tires
Features:
Realistic performance
Detailed flexbody
Separate detaching parts (hood, doors, trunk, fenders, mirrors, and bumpers)
Collidable submesh
Full interior
Stable on-road handling
Excellent off-road capability (except for the Twelve)
Four wheel drive on all models
Flextires
v1.2, see changelog
Here is a 1st Generation Bluebird Vision for under your tree! (or in your mods directory...)
Info:
The 1st Generation Vision was a type C bus made by BlueBird from 2003 – 2007.
Features:
-Animated props (including openable e-door and roof hatches)
-Changeable seat and floor color textures*
-ABS, slopebrake
-District name on the side of the bus
-Selectable 8-way types (dropdown in the spawn menu)
Gripes:
-The body appears shaky on the inside at high speeds (since it's not a flexbody it shakes rather than flexes)
Changelog:
-Fixed the left veer
-Added reflection in driver mirror
This should be the final final version!
*You can download different seat/floor textures here: Brown Black Green Red Blue Here is the PSD for the district name, making editing it with the same font easy.
Credits:
Brickman & Dereksh97: Original free-to-use-with-credit bus n/b
SBF- critiquing and suggestions
Khadner- CAT C7 sounds
ROR-EMS- CM300 Radio mesh
Carsonj493- BlueBird Vision 3D model
graysonk95- Making the bus!
PM me with any questions or comments. No mods, however, you may distribute customized textures, no permission needed.
Enjoy!
This pack is my attempt to capture the Streamline Moderne style popular in the 1930s and 1940s. The vehicles are all fictional, but their performance is realistic. I hope you'll enjoy driving them as much as I have enjoyed making them.
1948 Martin T64S "Custom" Tractor
A very low-slung 6x4 tractor. It has independent front suspension with double wishbones and load sharing rear suspension. The engine is a naturally aspirated 12-cylinder diesel driving through a 7-speed gearbox and locking differentials. Overall length is 29 ft, wheelbase 22 ft from front axle to centre of rear axle group, width 102 in, height 14 ft 9 in to tip of smokestacks. Kerb weight is 20,000 lbs, gross combination weight 80,000 lbs.
Fully loaded, the T64S will reach a top speed of 60 MPH with one of the included trailers. It will accelerate from 0-50 MPH in 1 minute, 0-60 MPH taking approximately 2 minutes.
1948 Martin O40 Tanker
A streamlined tank trailer in fictional "Hexaco" livery. Steel unibody, load sharing suspension. Overall length is 40 ft, wheelbase 28 ft from kingpin to axle group centre, width 102 in, height 10 ft 6 in. Loaded weight is 60,000 lbs.
1948 Martin F45 Flatbed
A simple flatbed trailer with stainless steel load deck and load sharing suspension. The deck is submeshed with the rollon flag and has ties to secure loads. Overall length is 45 ft, wheelbase 36 ft from kingpin to axle group centre, width 102 in, deck height 59 in, overall height 79 in to top of bulkhead. Kerb weight is 12,500 lbs, rated load 47,500 lbs.
1948 Martin V59 "Streamliner" Dry Van
A very large and somewhat impractical dry van. It has a streamlined stainless steel unibody and load sharing suspension. Overall length is 59 ft, wheelbase 47 ft from kingpin to axle group centre, width 102 in, height 14 ft 9 in. Loaded weight is 60,000 lbs.
Notes
These have only been tested in Rigs of Rods version 0.38.67.
The wheels have 40 nodes each, and the meshes were made in Sketchup. Don't expect these to be FPS-friendly.
The trailers are roll coupled via the system used by Lenni and Badboy for trailer steering. The centre of gravity and suspension are tuned accordingly; the trailers may topple easily on trucks that lack these nodes.
To minimise rolling resistance, the wheels are pushing the limits of the beam engine. They tend to oscillate when stationary. Caution is advised when stopping or parking on slopes as they may creep.
The trailers have very low drag. The T64S will not pull most other trailers at high speed.
Licence
CGTextures does not allow redistribution of its textures under open source licences. You must remove/replace their texture before releasing modifications of this truck. All other assets used are available for modding. See the readme for specific file information and licensing details.
Here it finally is! The Bombardier ALP-45DP dual powered locomotive.
It comes in two different liveries, AMT (Canada) and NJT (USA).
Both a version of the locomotive in diesel and in electric mode is available, only difference are the sounds and the removed exhausts on electric version.
Please carefully read the instructions BEFORE posting useless questions:
Spawning:
Use the train spawner placed on the map (small building where it says "Trains") or place it on a straight track piece via the .terrn file, DO NOT spawn in the truck spawner this will not work.
Controls:
The ALP uses default truck controls. Always stay in automatic-transmission, it will not shift in the second gear!
F5/F6: to rais or lower the pantograph.
CTRL + 1: change directional lighting
CTRL + 2: front ditch lights
CTRL + 3: front lights
CTRL + 4: rear ditch lights
CTRL + 5: rear lights
CTRL + 6: wipers
(Un)Coupling:
The knouckle couplers couples other trains (using the same coupler, of course...) like other ALP's automatically. When coupled, both carriages are connected to each other ingame. If you want to uncouple two carriages, you need to unlock couplers on BOTH carriages in between you want to uncouple. The ALP has a small lever next to the rear knuckle coupler (with a lock/unlock-sign next to it) that can be grabbed by mouse. Pull to "unlock" position on both carriages and done. Not that complicated.
Thanks to:
sputnik_1 - Without him this would not have been possible. He made trains actually work in Rigs of Rods (as you will see after reading this and testing the locomotive), outgoing from donoteats basic layout design. Furthermore he helped a lot with tweaking the ALP, to make it drive as good as it does. Many many thanks mate!
donoteat - He once had the idea to bring trains to RoR and made the great layout we are now using.
And thanks to the inveted members who tested this!
Update:
Added ropables so it can now be lifted with a crane.
Errors:
Game might crash when you want to couple two ALP's, to avoid this disable high quality refelctive effeckts!
This is my mod to BigBoy and 95blackz27's Kenworth T800.
Things I added/remade:
I chopped the stacks.
Fixed to hydraulics in the back (red/green)
Made the truck shinier.
Change the color then changed it back.
Added a weight to the Tri-Axle Longframe Daycab (.truck file #1)
Added then got rid of a bull bar from the Kenworth SAR.
Added then got rid of custom mudflaps made by me.
Added color to the door handle.
Etc.
Authors: BigBoy (Original Truck); 95blackz27 (Added Traction Control, Shined Driveshaft) HemiBoy95 (Aolcao Wheels) CarBoy (Weight and N/B for Weight) Scania_Lover (This mod of it)
This is a 1976 Ford W-9000 cab-over-engine semi tractor. A fairly basic node-beam vehicle that will get the job done. All of the pieces for this were created by me (M-138) except the mirrors. Feel free to modify, just remember to give credit.
Trailer P-32 is designed for quick transport wheeled and tracked vehicles and other material to the weight of 40 tons. In an emergency, up to 46 tons, maximum speed may be 10 km / h Is designed for off-set with tractor on roads I to III. class, the roads are paved and after tolerable terrain without external imbalances and obstacles.
Technical and tactical data
Dimensions:
- Total length (including shaft): 9475 mm
- Overall height: 1420 mm
- Height of the loading area: 1000 mm
- Overall width: 3100 mm
- Wheelbase: 4410 mm + 1000 mm
Loading area:
- Length: 4900 mm
- Width: 3100 mm
weights:
- Standby: 10,600 kg
- Payload: 40,000 kg
10bb3UID-rundhauber-dumper.zip
view details
Gold
Silver
Bronze
